[USRP-users] RFNOC and UHD only Tx samples (without GnuRadio)

Hello, I'm trying to make a uhd program that is basically the rfnoc version of the non-RFNOC Tx_waveforms example in uhd/host/examples. What I am trying to do is transmit samples (from a wave table for example), using the rfnoc radio block. Note that I am cross compiling for an E310 usrp. Also

Re: [USRP-users] A capable Laptop with 10Gb Lan support for USRP X310?

Hi all. On our side, we have tried the Promise Sanlink3, with 10Gtk 10G-SFP-T under Windows, with "limited" success in Tx (we

Re: [USRP-users] "Additional signa"l after a packet transmission

Hi Marcus, Thanks for your help. Don't you think that 40-60ms is a bit long fot the amplifier to shut down ? I tried to increase the gain at the receiver and the sender sides but I still have the problem. More important, I tried an other scenario by sending a burst of symbols whose value is

[USRP-users] Save The Date -- GNU Radio Conference -- September 17-21 -- Las Vegas

* ** Save The Date ** * GNU Radio Conference 2018 (GRCon 2018)

[USRP-users] Using Dual Rx Channel B210 from GRC

I am using a UHD source in GRC. I configured it to stream from both the RX ports. The first port is tuned to 2.437 GHz and the another to 2.435 by providing a lo_offset of 2MHz. Samples from first port go under some processing and then have to be added to samples coming from the second port. When