Re: [USRP-users] Hello,

On 12/14/2018 11:24 AM, Ian Buckley via USRP-users wrote: N310 has a different ADI radio chip and since I did not work on the design I don’t want to give you misleading advice on that one. N210 is different, as it uses the standard Ettus interchangeable daughter board standard. Some daughterboar

Re: [USRP-users] GPS data acquisition with the X310

I used the X310 internal 10 MHz reference for lack of a signal generator, but the GNSS-SDR couldn't it track this data. Now that I got a signal generator I will try on Monday in the lab to provide the reference externally. I don't use grc nor labview because the daughterboard in the X310 doesn't

Re: [USRP-users] Hello,

On 12/14/2018 11:24 AM, Ian Buckley via USRP-users wrote: N310 has a different ADI radio chip and since I did not work on the design I don’t want to give you misleading advice on that one. N210 is different, as it uses the standard Ettus interchangeable daughter board standard. Some daughterboar

Re: [USRP-users] does uhd_image_builder work with N310

Hi Jason and Rob, I'm using OOT RFNoC builds for N300 and N310 successfully. What version are you on? All I *think* I needed was the commit here, which I see is now on both master and UHD-3.13 branches: https://github.com/EttusResearch/fpga/commit/cad653b5598d7c7728c9674675ae3b59f51daa14 I perso

Re: [USRP-users] GPS data acquisition with the X310

Hi Luz, nice seeing you again! So, as discussed before, I've made a custom VM image just for you (reminder: it's at [0]) including GNSS-SDR and all the drivers you'd need. I'm a bit surprised you haven't tried to simply use it, following GNSS- SDR's tutorial (the first page I think I've saved to

Re: [USRP-users] Hello,

N310 has a different ADI radio chip and since I did not work on the design I don’t want to give you misleading advice on that one. N210 is different, as it uses the standard Ettus interchangeable daughter board standard. Some daughterboards have features to fully phase align synthesizers after a

Re: [USRP-users] does uhd_image_builder work with N310

Hi Jason, I had mentioned this same issue on Oct 29 ("RFNoC build issue for OOT block"), but never got any response. I had to abandon RFNoC development on the N310 in favor of doing it on the X310 and I have not returned to the N310. Rob On Fri, Dec 14, 2018 at 10:20 AM Jason Matusiak via USRP-us

[USRP-users] does uhd_image_builder work with N310

I finally got an N310 to play with. I was trying to build a custom RFNoC FPGA image, but it keeps erroring out. The command I am running is: ./uhd_image_builder.py -d N310 -t N310_RFNOC_XG -I /opt/gnuradio/N310/src/rfnoc-nocblocks -y /opt/gnuradio/N310/src/rfnoc-nocblocks/fpga_build/n310_4ddc

Re: [USRP-users] Question B210 installation of C++ driver under Visual Studio 2017

Just to tack onto this, I'm wrapping up an update to the "Building and Installing the USRP Open Source Toolchain (UHD and GNU Radio) on Windows " KB to reflect use with Win10 and VS2017. The

Re: [USRP-users] Question B210 installation of C++ driver under Visual Studio 2017

[Sending to the list in case this information can help someone else:] I just did this with the following dependencies. All from source except python-2.7 * boost 1.68.0 - bzip2-1.0.6 (probably not required, but it was easy to add to boost) - icu4c - 63.1 - zlib-1.2.11 - python 2.7 * building boos

Re: [USRP-users] Hello,

Thanks Ian. Am I correct to assume that this is not the case for N210? What about for the N310? I am not so sure in this case, as it uses an AD chip as the B210. Regards El mié., 12 dic. 2018 a las 15:26, Ian Buckley () escribió: > Brais, > Sam sent you a little bit the wrong direction there, th