Unfortunately not,
I'm trying to get the N310s to operate at 584.2 MHz, so my LO is going at
1168.4 MHz (there's a note saying the external LO should supply twice the
desired center frequency). I would have thought there's no need to specify
the center frequency when running with the LO switched
The N310 data sheet (in one of the footnotes) indicates that external LO is
limited to the frequency range 300-4000 MHz. Are you trying to operate
below 300MHz?
Rob
On Thu, Oct 24, 2019 at 3:42 PM Mark Wagner via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi all,
>
> I'm currently trying
Hi all,
I'm currently trying to run a set of USRP N310s all using the same external
LO, but I seem to be getting this error
"[ERROR] [0/Radio_1] RX LO lowband does not support setting source to
external"
which will repeat for all the radios. I tried looking online for the source
of the error