Ok understood.
Many thanks again.
David
Le mer. 26 août 2020 à 22:15, Julian Arnold a
écrit :
> David,
>
> unfortunately not. The filter API does only export the filters internal
> to the AD9361 on B2xx series devices.
> However, if you let MCR = sample rate you should basically only have
>
David,
unfortunately not. The filter API does only export the filters internal
to the AD9361 on B2xx series devices.
However, if you let MCR = sample rate you should basically only have
filters inside the AD9361 active.
Cheers,
Julian
On 8/26/20 6:16 AM, David Carsenat wrote:
Ok thanks a
Ok thanks a lotJulian, this is very helpful.
Does your example allow to list FPGA filters also ?
Le mar. 25 août 2020 à 21:57, Julian Arnold a
écrit :
> David,
>
> take a look at the ad9361 user guide [1]. It has all the information you
> are looking for.
>
> If you want to know which filters
David,
take a look at the ad9361 user guide [1]. It has all the information you
are looking for.
If you want to know which filters you can configure and how, take a look
at [2]. It's a simple example I wrote quite a while back but it should
still be good to get you started.
Hope that
Hi, I am using a B205 and I'd just like to know what are the
difference filter stages (analog and digital) seen by the signal (both Tx
and Rx), in the AD936x and in the FPGA.
Another way to help me, should be to have a description of the filter that
I can address with the filter.hpp functions :