Hi,
TwinRx is Rx only card. Look at the spec here:
https://www.ettus.com/product/details/TwinRX
Regarding power measurement calibration this is how it could work (so
you can measure signal power entering Rx port of your USRP):
Connect to the USRP port an RF signal source with known power 'Px'
Thanks for the tip Michael. I'm on travel at the moment, and will try this
next week when I get back to the lab. I'll report my findings to mailing
list.
Cheers
Stephan
On Wed, Nov 14, 2018 at 1:09 AM Michael West wrote:
> Hi Stephan,
>
> Try moving the GPSDO power from the J509 connector to
Thank you very much!
On Thu, Nov 15, 2018, 18:07 Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com wrote:
> On 11/15/2018 11:52 AM, Dave NotTelling via USRP-users wrote:
> > Can the GPSDO OctoClock free run without GPS? I've had some PPS
> > generators that claim to have the ability
I am using the RFNoC radio_ctrl API with my X310 and when I call
get_rx_antenna() , I get an empty string. The problem is in
x300_radio_ctrl_impl.cpp. The corresponding set_rx_antenna() function
should be calling the base class radio_ctrl_impl->set_rx_antenna() so that
the locally cached value
Hi David,
You can find the N3xx rack mount kit here:
https://www.ettus.com/product/details/n3xx-rack-mount
Regards,
Nate Temple
On Fri, Nov 16, 2018 at 8:19 AM Bengtson, David E. via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Is there a 19” Rack mount Kit for the N310 available or
Peter, I know that this is an old thread, but I was wondering if you remember
if you've ever solved this? I think that I am running into the same issue with
my RFNOC OOT block.
Thanks.
Hi All,
Tutorial aside, I was running the rfnoc_fir example from GNU Radio
Companion. At 10M sample
Hi Rob,
Thanks for bringing this to our attention. We will file an issue on our
internal bug tracker and get it resolved.
Regards,
Nate Temple
On Fri, Nov 16, 2018 at 10:41 AM Rob Kossler via USRP-users <
usrp-users@lists.ettus.com> wrote:
> I am using the RFNoC radio_ctrl API with my X310 and
Dear All:
I have some questions regarding BasicTX Daughterboard. It seems that this
board does not have complex design such as analog mixer. But it can be set
with a carrier frequency in GNU Radio. My questions are:
1) When I use this daughterboard and set its carrier frequency to nonzero
(e.g.,
Along the same lines, the x300_radio_ctrl_impl code implements
set_rx_bandwidth() and get_rx_bandwidth() but not set_tx_bandwidth() and
get_tx_bandwidth(). The result is that the Tx functions call the base class
which doesn't really do anything apart from locally storing the setting.
Rob
On Fri,
Is there a 19” Rack mount Kit for the N310 available or planned?
Thanks
Dave
smime.p7s
Description: S/MIME cryptographic signature
___
USRP-users mailing list
USRP-users@lists.ettus.com
10 matches
Mail list logo