On 03/19/2019 09:12 PM, Damon wrote:
Hi Marcus,
The phase responses of two channels of different dboards (ubx-160)
in a X310 are very consistent. When the frequency of transmitting
signal changes from 460.01MHz to 460.03Mhz, the phase difference
between two RX channels of different
Hi Marcus,
The phase responses of two channels of different dboards (ubx-160) in
a X310 are very consistent. When the frequency of transmitting signal
changes from 460.01MHz to 460.03Mhz, the phase difference between two RX
channels of different dboards in X310 remains unchanged. But for
Hello,
I have multi_usrp setup with many USRPs that are all doing timed
sampling. The sampling intervals need to be as fast as 1ms sampling for
999us. In addition, at the start of the sample window, I need to grab
the state of the GPIO pins on the front panel. I have tried the following :
Yes. Thanks!
On Tue, Mar 19, 2019 at 2:10 PM Brian Padalino wrote:
> On Tue, Mar 19, 2019 at 1:52 PM Rob Kossler via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> Hi,
>> Are there restrictions regarding which DDC ports must be connected to
>> which Radio ports. I am using an X310/UBX
On Tue, Mar 19, 2019 at 1:52 PM Rob Kossler via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hi,
> Are there restrictions regarding which DDC ports must be connected to
> which Radio ports. I am using an X310/UBX with a custom C++ rfnoc
> application and would like to do the following:
>
Hi,
Are there restrictions regarding which DDC ports must be connected to which
Radio ports. I am using an X310/UBX with a custom C++ rfnoc application
and would like to do the following:
Radio_0:port0 -> DDC_0:port0
Radio_1:port0 -> DDC_0:port1
Unfortunately, this fails (using default FPGA
Hello,
I am using USRP N310 , how can i use the external clock LO IN 0/1 and 2/3 in
GNURadio?
Also i would like to know witch API is better to develop aplication in this
device, GNURadio, or Matlab?
Best regards
Diogo
___
USRP-users mailing list
