This is supposed to be a tech list for the VMAX.A few people can ruin what
Paul has spent years setting up.IMHO go somewhere else.Bob H
"The Wild Cherry Max"
Home page at http://bdcomp.home.mindspring.com/main.html
- Original Message -
From: [EMAIL PROTECTED]
To: "
OK guys, this is still a tech list. Please keep your posts
mechanical\technical in nature.
Thanks
--
===
Paul Sayegh
V-Max Technical List Administrator
V-Max web
Dave, what's MET's??
Tyler Pennock, # 380
V max Owners Association
Eastern-Canada Director
1987 V max 1260
Ottawa,ON,Canada
[EMAIL PROTECTED]
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Tyler, use the .90 springs.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Thanks Don, I didn't think you got my message due to ISP problem.
Tyler Pennock, # 380
V max Owners Association
Eastern-Canada Director
1987 V max 1260
Ottawa,ON,Canada
[EMAIL PROTECTED]
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
Anytime.
Don "Old Man" Smith
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Just received a e-mail that was sent to the list a 3:30pm, it's now 11:04pm, Ive only
received 3 e-mails(posted to tech list all day), it looks like my ISP has screwed me
again,if anyone does get this and can reply to me that would be great, I have ask a
couple of questions, but got no replies
hey Tyler got your post. watching the METs.
go METs
go yanks
Dave r
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Tyler did u get this?
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Where has the tech list moved to? I seem to be getting the AOL chat room
.Where the hell is the hall monitor?
Guess he lost interest..Sluggo
_
SLUGGO- VMOA # 986-
[EMAIL PROTECTED]
My Max Pictures:
vmax.davidwpike.com
My Home Page
change when you turn the
mixture screw all the way in.
- Original Message -
From: "Ken W. Manz" [EMAIL PROTECTED]
Subject: Carb problem for Tech. List
snip
Carb #1 does not react when you turn in the pilot screw all the w
hi, i dont know if it helps but i have a complete bank of carbs off a 94 max
that had 10 thousand miles on it, ill sell the whole set up for $550 (all 4
carbs) but i dont want to split them up, im in new jersey, my # is 732 866
1630 and you can call up to 11pm eastern time, take care vinny
Ken, it doesn't have to be a specific carb as they are interchangeable.
You change the inlet for fuel with the position needed. I have a used
one if you can't find one up there.
Don "Old Man" Smith
.
To unsubscribe go to
Ken, see the following on ebay, what a coincidence!!!
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItemitem=390733513;
r=0t=0
- Original Message -
From: "Ken W. Manz" [EMAIL PROTECTED]
Thank you all for your valued advise; however when doing what was
suggested - the
Try [EMAIL PROTECTED] That's Furber's e:mail. He always has a Max
for parting out.
Kraig
The "P-51" Long Range Max
(915)857-7345
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Need some advise with my carb problem - comments welcome. I have a
pretty much stock 1993 Vmax (Canadian) with the following problem. Carb
#1 does not react when you turn in the pilot screw all the way. I
normally have them about 2-3 turns out. The spark plug from that
cylinder runs very
anz [EMAIL PROTECTED]
To: V-MAX TECH LIST [EMAIL PROTECTED]
Sent: Sunday, July 23, 2000 5:23 PM
Subject: Carb problem for Tech. List
Need some advise with my carb problem - comments welcome. I have a
pretty much stock 1993 Vmax (Canadian) with the following problem. Carb
#1 does not react whe
Bob, I had the same problem a few years back, float level was a tad to high on problem
carb, also cleaned needle look like some crap was embedded in it. cured problem.
Tyler Pennock, # 380
V max Owners Association
Eastern-Canada Director
1987 V max 1260
Ottawa,ON,Canada
[EMAIL PROTECTED]
... but put
your safety glasses on) I assume you have changed the plug or
swapped it with one from a cylinder not having this problem.
campbell
- Original Message -
From: "Ken W. Manz" [EMAIL PROTECTED]
Subject: Carb problem for Tech. List
snip
Carb #1 does not react whe
PROTECTED]
To: V-MAX TECH LIST [EMAIL PROTECTED]
Sent: Sunday, July 23, 2000 6:35 PM
Subject: Carb problem for Tech. List
Bob, I had the same problem a few years back, float level was a tad to high
on problem carb, also cleaned needle look like some crap was embedded in it.
cured problem.
Tyl
Did I miss a post did the tech list address change? What happened to
seawing address?
scott
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
Both lists
have been in existence for some time ... this list is intended for
technical specific posts .. the "seaweed/seawing" list is a general
social list.
campbell
- Original Message -
From: [EMAIL PROTECTED]
To: "V-MAX TECH LIST" [EMAIL PROTECTED]
Sent: Monday, June 12,
Yeah, we don't argue about bikes here! We only talk tech stuff. Can someone please
tell me how to put air in my tires?
Sorry Paul.
Scott
.
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.
23 matches
Mail list logo