Hi
Yes exactly, the system do not hang or crash with debug stack trace but you have
access to nothing , femon seems to continue to work, the displayed number move
but no channels displayed (no image signal on xine) , unable to enter OSD menu
and you have to kill vdr to exit
But ... if you enter
I have installed femon 163 with my vdr 170. There's some remarks concerning
of h264 channels
no any information in CoderateH (I can see only ---)
The plugin doesn't support multiproto/S2API and therefore channels using
new coderates like 9/10 are shown as data invalid (---).
ok, I
On Sat, 22 Nov 2008, Goga777 wrote:
in BITRATE field I can see only ---(6 Mbit/s)
I can see without any problem video/audio bitrate on the top right of OSD
(that's why the bitrate is parsed at the
moment correctly) , but I don't see video/audio bitrate below in OSD
Sorry, I don't quite get
in BITRATE field I can see only ---(6 Mbit/s)
I can see without any problem video/audio bitrate on the top right of OSD
(that's why the bitrate is parsed at the
moment correctly) , but I don't see video/audio bitrate below in OSD
Sorry, I don't quite get your explanation, but femon
I confirm also that femon 163 + vdr 1.7.0 + H264 + multiproto hang when you
change channel while femon is displaying info, happen often when going from
H264
to Mpeg2 channels (like simul HD and Simul SD on Astra 19.2)
No problem at all if you close femon before switching channels
I'm
With older version of femon or this one, when I go trough multiproto + no signal
or quality appear with my S2-3200 or with Nova - T -500 even of szap (stay at
zero). I use an HD receiver to point out my dish, so no theorical need of it
on femon, even if it should be nice.
By the way I have a
On Sat, 22 Nov 2008, [EMAIL PROTECTED] wrote:
With older version of femon or this one, when I go trough multiproto + no
signal
or quality appear with my S2-3200 or with Nova - T -500 even of szap (stay at
zero). I use an HD receiver to point out my dish, so no theorical need of it
on femon,
On Sat, 22 Nov 2008, [EMAIL PROTECTED] wrote:
I confirm also that femon 163 + vdr 1.7.0 + H264 + multiproto hang when you
change channel while femon is displaying info, happen often when going from
H264
to Mpeg2 channels (like simul HD and Simul SD on Astra 19.2)
No problem at all if you
On Sat, 22 Nov 2008, Rolf Ahrenberg wrote:
As I already told you, the femon doesn't support = vdr-1.7.0 (yet), so
does this hang happen also in the latest vdr-1.6.0 series?
I use pure vdr-1.6.0-2 together with softdevice/xineliboutput plugins in
xorg. I confirm hang with femon (it is
As reproduce femon hangs: call femon and switching of channels
upwards/downwards pass to the channel which has no signal.
Vladimir Monchenko.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi
I have installed femon 163 with my vdr 170. There's some remarks concerning of
h264 channels
no any information in CoderateH (I can see only ---)
in BITRATE field I can see only ---(6 Mbit/s)
FRAME RATE - ---
Audio stream #0 ()
Codec - H264
Codec - ---
Channel Mode - ---
Bitrate - ---
On Fri, 21 Nov 2008, Goga777 wrote:
I have installed femon 163 with my vdr 170. There's some remarks concerning
of h264 channels
no any information in CoderateH (I can see only ---)
The plugin doesn't support multiproto/S2API and therefore channels using
new coderates like 9/10 are shown
12 matches
Mail list logo
