Hi all!
While debugging another issue, I noticed (ADDF/DELF streamdev traffic)
that VDR is constantly adding and deleting filters in cPatFilter::Process().
As I don't know of this filter stuff, I ask here:
Is this correct behaviour?
It probably is, but I just want to be sure :)
Below is a log
Hanno Zulla schrieb:
Hi,
on my e-tobi based 1.6 setup, the CAM menu umlauts are broken, while all
the other menu items (that I checked so far) use the correct encoding.
Is there a recoding missing between the CAM and the vdr OSD?
What LANG environment are u using? Please look at your
Reverting xine_input_vdr.c breaks the OSD scaling.
cu
Edgar (gimli) Hucek
Petri Helin schrieb:
[EMAIL PROTECTED] wrote:
Petri Helin [EMAIL PROTECTED] writes:
For a temporary solution you could revert file xine_input_vdr.c to
version 1.127:
cvs update -C -r 1.127 xine_input_vdr.c
It
gimli wrote:
Reverting xine_input_vdr.c breaks the OSD scaling.
cu
Edgar (gimli) Hucek
Could you elaborate a bit? What settings do you have, what is the
resolution of the video when it happens, what are the exact symptoms you
are experiencing and so on... I myself have not yet
Screen resolution is 1920x1080 for HDTV.
When is switch from an SDTV channel to an HDTV channel
the OSD is way to small. Looks there is no scalling to
the larger resolution.
cu
Edgar (gimli) Hucek
Petri Helin schrieb:
gimli wrote:
Reverting xine_input_vdr.c breaks the OSD scaling.
cu
gimli wrote:
Screen resolution is 1920x1080 for HDTV.
When is switch from an SDTV channel to an HDTV channel
the OSD is way to small. Looks there is no scalling to
the larger resolution.
Yes, that's an unfortunate side effect. You could try reverting several
other files also, namely
Hi
I was running vdr-1.6.0 with vdr-xine-0.8.0 and upgraded (for no particular
reason!) to vdr-xine-0.8.2.
I now have occasional audio/video sync issues when replaying recordings,
often cured by stopping and restarting the playback.This happens with
new and old, previously good,
oops
I'm trying to downgrade vdr-xine from 0.8.2 back to 0.8.0 but get
vdr-xine: Client connect failed!
in std-out. Can this be further diagnosed? The xine-lib and xine-ui seem
to otherwise work just fine, just won't connect to vdr-xine.
Thanks
Simon
Fedora 8, vdr-1.4.7-6.fc8 and old full-feature Terratec C-card.
I've configured vdr to start two minutes before the time of the program,
and ten minutes after the recording, in case timing is a bit off.
For some reason, when recording the Finnish National broadcaster's (YLE)
programs, vdr every
Otto J. Makela wrote:
Fedora 8, vdr-1.4.7-6.fc8 and old full-feature Terratec C-card.
I've configured vdr to start two minutes before the time of the program,
and ten minutes after the recording, in case timing is a bit off.
For some reason, when recording the Finnish National broadcaster's
On 05/06/08 22:26, Anssi Hannula wrote:
Otto J. Makela wrote:
Fedora 8, vdr-1.4.7-6.fc8 and old full-feature Terratec C-card.
I've configured vdr to start two minutes before the time of the program,
and ten minutes after the recording, in case timing is a bit off.
For some reason, when
I demand that Simon Baxter may or may not have written...
I'm trying to downgrade vdr-xine from 0.8.2 back to 0.8.0 but get
vdr-xine: Client connect failed!
in std-out. Can this be further diagnosed? The xine-lib and xine-ui seem
to otherwise work just fine, just won't connect to vdr-xine.
12 matches
Mail list logo