Re: [vdr] [ANNOUNCE] DVB-S2 + H.264 support for VDR-1.5.10
Am Samstag, den 20.10.2007, 22:49 +0200 schrieb Reinhard Nissl: Hi, Jan Wagner schrieb: attached you'll find an updated patch for VDR-1.5.10. It replaces the formerly patch for VDR-1.5.9. could you seperate the patch into H.264 and DVB-S2 parts again? I use DVB-C with it here and do not want to upgrade to drivers with DVB-S2 support. I've removed the DVB-S2 part from the original patch. The result is attached. Please give it a try. Thanks. It does work as expected. I am still not able to play H.264 content on my Core2Duo 6850 (3.0 GHz) though. My nvidia graphics card 8600 does not seem to support xvmc so I have a lot of dropped frames and lots of block artefacts which seem to be caused by the stream (ffmpeg always says something about cabal(?)). Can I transcode the records into something playable under windows? pes2ts does not seem to work. Cheers Jan ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] DVB-S2 + H.264 support for VDR-1.5.10
Jan Wagner wrote: Thanks. It does work as expected. I am still not able to play H.264 content on my Core2Duo 6850 (3.0 GHz) though. My nvidia graphics card 8600 does not seem to support xvmc so I have a lot of dropped frames and lots of block artefacts which seem to be caused by the stream (ffmpeg always says something about cabal(?)). Can I transcode the records into something playable under windows? pes2ts does not seem to work. Try the patch at posted at http://www.vdr-portal.de/board/thread.php?threadid=50139page=32 from Reinhard, which will solve most of the performance problems. Unfortunately, transmissions using interlaced pictures+spatial direct mode still do not seem to work right and may cause major performance and stability problems. With kind regards Jörg ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Fast replay pauses playback for awhile
Hi, I have problem that when I do fast forward or rewind and return to normal speed by releasing the FF button, vdr pauses the replay for awhile. This pause lasts from 2 seconds up to 15 seconds. It's very very annoying, especially when I'm trying to edit recordings. Jumping with green and yellow buttons work ok. I'm using vdr-1.4.7, xineliboutput-1.0.0rc2, osdteletext-0.5.1, epgsearch-0.9.21, remote-0.3.9 and subtitles-0.5.0. And I have one technotrend C 1500 DVB-C budget card. Any help is appreciated. Marko ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] softdevice 0.4.0 won't compile
./configure ends up with an ffmpeg not found error that tells me to check config.log. Here are the contents of config.log. Parameters '' PKG_CONFIG_PATH '/usr/local/lib/pkgconfig' Testing system and cpu type. uname -a: Linux lfs 2.6.22.1-xbox-xbox #2 PREEMPT Tue Sep 11 22:21:18 GMT 2007 i686 pentium3 i386 GNU/Linux g++ -dumpmache: i686-pc-linux-gnu Checking for pkg-config.--- 0.22 Checking for ffmpeg. try to use pkg-config. Package libpostproc was not found in the pkg-config search path. Perhaps you should add the directory containing `libpostproc.pc' to the PKG_CONFIG_PATH environment variable No package 'libpostproc' found /usr/local/include/ffmpeg/avcodec.h:2249: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /usr/local/include/ffmpeg/avcodec.h:2259: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /tmp/ccSYN0QX.o: In function `main': softdevice-conf-24957-6749-13481.c:(.text+0x12): undefined reference to `avcodec_init()' softdevice-conf-24957-6749-13481.c:(.text+0x17): undefined reference to `avcodec_register_all()' collect2: ld returned 1 exit status pkg-config failed, try the default/parameter path. /usr/local/include/ffmpeg/avcodec.h:2249: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /usr/local/include/ffmpeg/avcodec.h:2259: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /tmp/cc215cp5.o: In function `main': softdevice-conf-24957-6749-13481.c:(.text+0x12): undefined reference to `avcodec_init()' softdevice-conf-24957-6749-13481.c:(.text+0x17): undefined reference to `avcodec_register_all()' collect2: ld returned 1 exit status Still failed. Maybe avutils is needed? /usr/local/include/ffmpeg/avcodec.h:2249: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /usr/local/include/ffmpeg/avcodec.h:2259: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /tmp/ccmPArYO.o: In function `main': softdevice-conf-24957-6749-13481.c:(.text+0x12): undefined reference to `avcodec_init()' softdevice-conf-24957-6749-13481.c:(.text+0x17): undefined reference to `avcodec_register_all()' collect2: ld returned 1 exit status No. Sorry giving up. However when ffmpeg is compiled libpostproc is built and installed but no libpostproc.pc is made or installed anywhere. There are no errors during compilation or installation either and the other libraries in ffmpeg make the corresponding *.pc file. Help! ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Reel Extension HD PCI
Hello, Peter Because I don't have the card, i could just tell you what I read about it. There is a vdr-plugin to using the card. It should work on a normal vdr. would you say the link to this plugin Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Reel Extension HD PCI
Hi, Igor Nikanov schrieb: Because I don't have the card, i could just tell you what I read about it. There is a vdr-plugin to using the card. It should work on a normal vdr. would you say the link to this plugin See svn://reelbox.org/testing/src for the sources from Reel: utils/hdshm is the hd-card driver vdr-1.4 is the reel-patched VDR vdr-plugins/reelbox is the hdcard-output-plugin vdr-plugins/erfplayer is a fileplayer-plugin for the hdcard vdr-plugin/filebrowser is a filebrowser-plugin to show/replay files on the hdcard Reiner ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] softdevice 0.4.0 won't compile
Quoting Darren Wilkinson: ./configure ends up with an ffmpeg not found error that tells me to check config.log. Here are the contents of config.log. Parameters '' PKG_CONFIG_PATH '/usr/local/lib/pkgconfig' Testing system and cpu type. uname -a: Linux lfs 2.6.22.1-xbox-xbox #2 PREEMPT Tue Sep 11 22:21:18 GMT 2007 i686 pentium3 i386 GNU/Linux g++ -dumpmache: i686-pc-linux-gnu Checking for pkg-config.--- 0.22 Checking for ffmpeg. try to use pkg-config. Package libpostproc was not found in the pkg-config search path. Perhaps you should add the directory containing `libpostproc.pc' to the PKG_CONFIG_PATH environment variable No package 'libpostproc' found /usr/local/include/ffmpeg/avcodec.h:2249: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /usr/local/include/ffmpeg/avcodec.h:2259: warning: 'ImgReSampleContext' is deprecated (declared at /usr/local/include/ffmpeg/avcodec.h:2243) /tmp/ccSYN0QX.o: In function `main': softdevice-conf-24957-6749-13481.c:(.text+0x12): undefined reference to `avcodec_init()' softdevice-conf-24957-6749-13481.c:(.text+0x17): undefined reference to `avcodec_register_all()' collect2: ld returned 1 exit status pkg-config failed, try the default/parameter path. For newer versions of ffmpeg, you should try cvs version of softdevice. http://lists.berlios.de/pipermail/softdevice-cvs/2007q3/000562.html http://lists.berlios.de/pipermail/softdevice-devel/2007q3/002896.html Stefan Lucke ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] [ANNOUNCE] vdr-xine-0.8.0 plugin
Hi, I'm pleased to announce the long awaited release 0.8.0, which integrates the vdr-xine-network patch. You can find it on my homepage: http://home.vr-web.de/~rnissl Excerpt from HISTORY: 2007-10-24: Version 0.8.0 - Frame duration was not set correctly in xine-lib for H.264 frames, causing frame drops an non fluent playback. - Added network patch (thanks to Tobias Grimm for supplying it). Although I had planned to optimize it to just use one port and only two sockets, I decided to release it in its current state instead of waiting further years. I've just modified it to use a more xine-like MRL netvdr://host:port#demux:mpeg_pes where port is optional (defaults to 18701). The fifo MRL should now be written vdr://tmp/vdr-xine/stream#demux:mpeg_pes, although a single slash will still work, too. - Updated et_EE.po (thanks to Arthur Konovalov for supplying the file). - Fixed a bug in vdr-xine's buffer handling for live TV mode which got most noticeable when switching back from a H.264 channel to a MPEG2 channel, especially when the machine was not capable of playing the H.264 stream in real time. As the buffer was not cleared when switching channels, old H.264 data was sent to xine instead of new MPEG2 data, which caused xine to incorrectly switch to H.264 mode. This behavior could lead to a crash in FFmpeg later. - Fixed OSD handling in vdr-xine as certain subtitles could cause a memory corruption in xine (thanks to Arthur Konovalov for providing sample recordings). Enjoy. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] softdevice 0.4.0 won't compile
2007/10/24, Darren Wilkinson [EMAIL PROTECTED]: ./configure ends up with an ffmpeg not found error that tells me to I made a patch that fits for me with softdevice 0.4.0 ffmpeg-snapshot, hope it will do the same thing to you. softdevice.ffmpeg.diff Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr