Hi,
Morfsta schrieb:
I'm not sure about that. So, if the function identifies an AUD at the
start of the payload then it could go on and scan the rest of the
payload for an SPS? In other words we must scan after the AUD for
Data[0] = 0x00
Data[1] = 0x00
Data[2] = 0x01
Data[3] 0x1F =
Morfsta schrieb:
have a look at the patch Gregoire provided starting at line 246.
You may want to look for DVBFE_DELSYS_DVBS2 which is what I think
you'll need.
What version of the HVR4000 patch/driver are you using if not the same
as Gregoire? Is it more recent?
I think it is more
I'm currently adopting the patches that make VDR DVB-S2 aware.
So I was wondering if there are any FTA channels out there that
broadcast MPEG2 using DVB-S2, so I could test this with my
existing equipment by simply plugging in a DVB-S2 receiver card.
Does anybody know of such a channel?
Klaus
I'm affraid from now there's not any dvb-s2 open mpeg2 channels
Igor
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi
Simple question, do you need a separate CAM for every DVB device you add?
I'm receiving a cable service from a single provider and want to decode up
to 2 boquets at once. Do both DVB cards need to have their own CI/CAM?
Thanks
Simon
___
Have a look at Gregoire's initial discussion with Reinhard here:
http://permalink.gmane.org/gmane.linux.vdr/34901
Maybe the mentioned debug code helps to get this sorted.
I don't have a HVR4000 here, with a TT3200 it's working out of the box...
Thanks for the info, I fixed Holger's original
Simon Baxter wrote:
Hi
Simple question, do you need a separate CAM for every DVB device you add?
I'm receiving a cable service from a single provider and want to decode up
to 2 boquets at once. Do both DVB cards need to have their own CI/CAM?
AFAIK, that is exactly the case. If
Hallo Klaus,
you can find only one MPEG2 FTA channel in DVB-S2
It's SR Fernsehen from Kabel Deutschland Package, 23.5E, 11635 H,SR
28500,FEC 9/10, sid 52000, vpid 4101, apid 4102, nid-tid 61441-10003
Some other Information you can find on
http://www.lyngsat.com/astra23.html
Hello vdr readers,
I use the VDR with the e-tobi sources. To access the OSD I install the
control-plugin. When I start the vdr manually all works fine, I can
use the OSD e. g. on tty1. When I use the start-stop script from the
installer I can't access the OSD.
The options for the control plugin