hi,
Make sure that your vdpau is working.
Have installed the xinelib-1.2-vdpau branch?
To check if you have vdpau run
vdr-xfe --video
you have the right info and the last two lines:
Available video drivers: dxr3 aadxr3 xv raw opengl xshm none sdl fb
Available audio drivers: pulseaudio alsa oss
Hi Klaus,
thx for your answer. Only 3 channels are found Ned3, Film1 HD and Sport 1 HD. I
also noticed this problem on some dvb-s2 transponders at 28.2 East.
kind regards
Newspaperman
Here's pid 0x0 and 0x11 I utilized with dvbsnoop:
Halim Sahin wrote:
Have installed the xinelib-1.2-vdpau branch?
...
You can download the right xinelib with vdpau support from hg with this command:
hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2-vdpau
Default xine-lib-1.2 branch has already incorporated vdpau support and
mentioned
hello everybody, in my case of he-aac streamtype 0x11 coming in, if
you want to record or listen to xineliboutput i have to change in
remux.c and pat.c in the following lines,
pat.c
case 0x04: / / STREAMTYPE_13818_AUDIO
+ case 0x11: / / ISO/IEC 14496-3 Audio with LATM transport syntax
thus
hi Luis,
seems like an ugly hack. Channel I'm receiving here has:
Stream_type: 15 (0x0f) [= ISO/IEC 13818-7 Audio with ADTS transport sytax]
kind regards
Newspaperman
--- Luis Fernandes telp...@gmail.com schrieb am Sa, 15.5.2010:
Von: Luis Fernandes telp...@gmail.com
Betreff: Re: [vdr]
My problem isn't VDPAU related, because I have same no smooth playing
with XV output too. (I tested pal mpeg2 television stations without
postprocessing and i used about 20% on my pentium4).
Halim Sahin napsal(a):
hi,
Make sure that your vdpau is working.
Have installed the
Have you tried with the CPU governor turned off? I know you said the CPU is
not busy, but worth elimninating.
Scott
Sent from my HTC
- Reply message -
From: Jiri Jansky jans...@fel.cvut.cz
Date: Sat, May 15, 2010 22:12
Subject: [vdr] xineliboutput - choppy problem
To: VDR Mailing List