On Sun, 13 Jul 2008, Goga777 wrote:
> where from does femon read apid/vpid ? from channels.conf or from dvb stream
> directly (service table)?
> in both cases I don't understand how the multiproto can influence on this
> issue
The pids are read directly from VDR's cChannels class:
cChannel::Ap
> > Apid - 0
> > Spid - 0
>
> The pids should work - I cannot see why multiproto/h264/S2 would affect
> them.
where from does femon read apid/vpid ? from channels.conf or from dvb stream
directly (service table)?
in both cases I don't understand how the multiproto can influence on this issue
On Sun, 13 Jul 2008, Lauri Tischler wrote:
> There are differences between 1.4.x and 1.7.0
..but the common parameters are the same, so I cannot say where the
problem might be until I (or someone else) have debugged it.
BR,
--
rofa
___
vdr mailing li
Rolf Ahrenberg wrote:
> On Sun, 13 Jul 2008, Lauri Tischler wrote:
>
>> With DVB-T those are ok, but missing are
>> Transmission ---
>> Modulation ---
>> Coderate --- (H) --- (L)
>> Guard---
>> and Bandwith is reported as 7Mhz, should be 8Mhz
>
> The current femon plugin doesn't sup
On Wed, 9 Jul 2008, Goga777 wrote:
> Apid - 0
> Spid - 0
The pids should work - I cannot see why multiproto/h264/S2 would affect
them.
> Aspect ratio - reserved
> Frame rate - 0.00 Hz
> Video format - unknown
> Resolution - 0x0
> Information about audio stream - #0
> bitrate - free (0 kbit/s)
>
On Sun, 13 Jul 2008, Lauri Tischler wrote:
> With DVB-T those are ok, but missing are
> Transmission ---
> Modulation ---
> Coderate --- (H) --- (L)
> Guard---
> and Bandwith is reported as 7Mhz, should be 8Mhz
The current femon plugin doesn't support multiproto, but for my
knowled
Goga777 wrote:
> Hi
>
> I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264
> dvb-s2 channels than some information in femon is
> missing -
>
> Apid - 0
> Spid - 0
> Aspect ratio - reserved
> Frame rate - 0.00 Hz
> Video format - unknown
> Resolution - 0x0
>
> Information
Hi
I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264 dvb-s2
channels than some information in femon is
missing -
Apid - 0
Spid - 0
Aspect ratio - reserved
Frame rate - 0.00 Hz
Video format - unknown
Resolution - 0x0
Information about audio stream - #0
bitrate - free (0 k
