Re: [vdr] wakealarm stopped working on 21 dec 2009.. ?!?!

[Travel Factory S.r.l.]

 Maybe the cards are supported by the newer kernel?

I went with a full install of opensuse 11.2 (11.1 didn't want to start the 
upgrade :-) )

11.2 recognized the onboard lan port (I had to have a pci-e lan card)
The skystar 2 was recognized with no problems.
The Hvr-3000 seems to be recognized but I have to investigate, since it is a 
combo DVB-S/DVB-T but you can use only one at time... I never used it before 
due to same strangeness, I will investigate later...
The chipset on the Usb stick was recognized but the drivers could not 
understand which specific stick it was. I had to put a modprobe options line to 
specify the card type... strangely the exact stick name as reported by lsusb -v 
is listed as card=21 but I allways used it with card=11


I also own a FF card I used on a 200mhz pentium (no fans...)... unfortunately 
no dvb-s2/t2... 


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] wakealarm stopped working on 21 dec 2009.. ?!?!

[Christoph Haubrich]

Am 23.12.2009 15:06, Travel Factory S.r.l. schrieb:

did you install kernel packages ONLY or a full update from 11.0 to 11.1 ?
Last year I installed only the kernel packages as a quick solution 
(worked fine). In the meantime I upgraded to 11.1. BTW:  you can install 
the additional (kernel) packages without deleting the old ones if you 
enter rpm -i instead of rpm -U. Nevertheless a backup especially of 
the grub/menu.lst could sometimes be very useful ...

upgrading the kernel means I have to recompile the drivers too
  

Maybe the cards are supported by the newer kernel?

Regards
Christoph

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr