Re: [vdr] VDR tuning
On 11.06.2012 11:34, Gerald Dachs wrote: Am 2012-06-11 00:48, schrieb Marx: Now there is question: how should I define my channels? Some time ago there was website with channels.conf for many positions but now it doesn't work. I did search now and found http://channelpedia.yavdr.com/gen/DVB-S/S13E/ which seems very interesting. Some people suggest that it's better to scan channels ourselves. Why? because channels definitions slightly differs, and that's probably because of bug in some drivers or hardware. For example sometimes frequency differs by one. Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
Am 2012-06-11 00:48, schrieb Marx: Now there is question: how should I define my channels? Some time ago there was website with channels.conf for many positions but now it doesn't work. I did search now and found http://channelpedia.yavdr.com/gen/DVB-S/S13E/ which seems very interesting. Some people suggest that it's better to scan channels ourselves. Why? Gerald ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
On 11.06.2012 09:04, Klaus Schmidinger wrote: Now there is question: how should I define my channels? Well, for starters you could set "Setup/DVB/Update channels" to "add new transponders" in VDR's Setup menu. That should update your channels.conf as far as possible. Usually I use this option (as i remember it's "3" in setup.conf), but does it fix problem I had with "scrambled" flag? And it's not enough. What I read, only some transponders should be enough to make full scan because during scan more frequencies are broadcasted. It doesn't work for me. If i strictly don't define some transponders, they won't be recognized and scanned. When i scan without diseqc defined, all outputed channel definitions have 0.0E - is it possible to tell scan which sattelite I use? Maybe I should switch on diseqc option, but in diseqc.conf set only one position? Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
In data domenica 10 giugno 2012 06:23:07, Marx ha scritto: > W dniu 2012-06-09 18:42, Klaus Schmidinger pisze: > > On 09.06.2012 16:18, Marx wrote: > >> What can be wrong if I can tune chanel with szap, but I can't it watch > >> via streamdev because VDR can't tune it? Is it driver fault? > > > > I don't think it's a driver thing if you can tune with szap. > > Maybe your DiSEqC setup needs to be adjusted. > > I did but no I don't use Diseqc, so in setup.conf it's: DiSEqC = 0 > So is it important that in diseqc.conf I still have Astra and Hotbird > defined? > Strange is I have only 3 channels on the list: > :sat TV > TVP 1;CYFRA > +:10892:h:S13.0E:27500:166=2:104=pol@4:503:100,1813,500,B00,B01,1803,1861:4807:318:11900:0 > TVP 2;CYFRA > +:10892:h:S13.0E:27500:167=2:108=pol@4:508:100,1813,500,B00,B01,1803,1861:4808:318:11900:0 > Polsat;Cyfrowy Polsat > S.A.:11158:v:S13.0E:27500:257=2:258=pol@4:264:0:13101:113:13200:0 > Hi, i have the same problem... without solutions until now . I noticed that VDR can't tune all the channles with vertical polaritazions (i'm sure about that, and see your third channel is just like that) I get this error in syslog: frontend 0/0 timed out while tuning to channel The Horizontal ones works good. I'm at work now, and i can't get more details, but all those channels work with szap and mythtv... My system is an ubuntu server with HVR-4000 and kernel-3.2, one dish with HotBird S13.0E. VDR with no screen on server, and a frontend with xineliboutput (vdr-sxfe). The channel conf is generated with w_scan. My old installation ( with kernel-2.32., still present in a dual boot server) works fine with the same vdr configuration (same folder with lib and bin override). Federico ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
On 11.06.2012 00:48, Marx wrote: W dniu 2012-06-10 11:18, Klaus Schmidinger pisze: The last one in your list has a CA-ID of 0, which means FTA. HOwever, this channel is also encrypted, just like the other two. Here's the channels.conf entry I get for that channel: Polsat;Cyfrowy Polsat S.A.:11158:VC56M2S0:S13.0E:27500:257=2:258=pol@4:264:1861,1803,100,1813,B01,500:13101:113:13200:0 and it works ok :) Somthing went wrong during scanning, because my definition was freshly scanned. Now there is question: how should I define my channels? Well, for starters you could set "Setup/DVB/Update channels" to "add new transponders" in VDR's Setup menu. That should update your channels.conf as far as possible. Klaus Some time ago there was website with channels.conf for many positions but now it doesn't work. I did search now and found http://channelpedia.yavdr.com/gen/DVB-S/S13E/ which seems very interesting. Some people suggest that it's better to scan channels ourselves. I've tried scanning based of transponders list included in dvb-utils package, but it doesn't find all channels. I had to manually add some frequencies. Everyone directs to kingofsat for transponders parameters, but there is no downloadable form fitting "scan" command. Do you know such a fresh list? and here is user.log: Jun 10 06:16:47 wuwek vdr: [11555] ERROR: no OSD provider available - using dummy OSD! Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: 0.0: status 'ready' ... Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: CaInfo: 0.0 sending CA info Where do these DVBAPI log messages come from? it's from the start of VDR, if you don't now this command, it's probably from one of plugins. I use: wuwek:~# service vdr start Starting Linux Video Disk Recorder: vdr Searching for plugins (VDR 1.7.27/1.7.27) (cache miss): streamdev-server epgsearch conflictcheckonly dvbapi quickepgsearch epgsearchonly epgfixer. Seems it's from dvbapi which I use with local oscam to use card with VDR. https://github.com/manio/vdr-plugin-dvbapi Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
W dniu 2012-06-10 11:18, Klaus Schmidinger pisze: The last one in your list has a CA-ID of 0, which means FTA. HOwever, this channel is also encrypted, just like the other two. Here's the channels.conf entry I get for that channel: Polsat;Cyfrowy Polsat S.A.:11158:VC56M2S0:S13.0E:27500:257=2:258=pol@4:264:1861,1803,100,1813,B01,500:13101:113:13200:0 and it works ok :) Somthing went wrong during scanning, because my definition was freshly scanned. Now there is question: how should I define my channels? Some time ago there was website with channels.conf for many positions but now it doesn't work. I did search now and found http://channelpedia.yavdr.com/gen/DVB-S/S13E/ which seems very interesting. Some people suggest that it's better to scan channels ourselves. I've tried scanning based of transponders list included in dvb-utils package, but it doesn't find all channels. I had to manually add some frequencies. Everyone directs to kingofsat for transponders parameters, but there is no downloadable form fitting "scan" command. Do you know such a fresh list? and here is user.log: Jun 10 06:16:47 wuwek vdr: [11555] ERROR: no OSD provider available - using dummy OSD! Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: 0.0: status 'ready' ... Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: CaInfo: 0.0 sending CA info Where do these DVBAPI log messages come from? it's from the start of VDR, if you don't now this command, it's probably from one of plugins. I use: wuwek:~# service vdr start Starting Linux Video Disk Recorder: vdr Searching for plugins (VDR 1.7.27/1.7.27) (cache miss): streamdev-server epgsearch conflictcheckonly dvbapi quickepgsearch epgsearchonly epgfixer. Seems it's from dvbapi which I use with local oscam to use card with VDR. https://github.com/manio/vdr-plugin-dvbapi Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
W dniu 2012-06-10 10:08, Petri Helin pisze: On Sat, Jun 9, 2012 at 5:18 PM, Marx wrote: What can be wrong if I can tune chanel with szap, but I can't it watch via streamdev because VDR can't tune it? Is it driver fault? Marx Hi, and your VDR and streamdev versions are? VDR: 1.7.27-2 streamdev: 0.5.1+git20111211+git20120325-2 It's standard Debian distribution, but I see I can upgrade streamdev, but I really doubt it's streamdev fault Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
On 10.06.2012 06:23, Marx wrote: W dniu 2012-06-09 18:42, Klaus Schmidinger pisze: On 09.06.2012 16:18, Marx wrote: What can be wrong if I can tune chanel with szap, but I can't it watch via streamdev because VDR can't tune it? Is it driver fault? I don't think it's a driver thing if you can tune with szap. Maybe your DiSEqC setup needs to be adjusted. I did but no I don't use Diseqc, so in setup.conf it's: DiSEqC = 0 So is it important that in diseqc.conf I still have Astra and Hotbird defined? No. If you don't use DiSEqC, you don't need to care about diseqc.conf. Strange is I have only 3 channels on the list: :sat TV TVP 1;CYFRA +:10892:h:S13.0E:27500:166=2:104=pol@4:503:100,1813,500,B00,B01,1803,1861:4807:318:11900:0 TVP 2;CYFRA +:10892:h:S13.0E:27500:167=2:108=pol@4:508:100,1813,500,B00,B01,1803,1861:4808:318:11900:0 Polsat;Cyfrowy Polsat S.A.:11158:v:S13.0E:27500:257=2:258=pol@4:264:0:13101:113:13200:0 and while first two works via streamdev, the last one don't. The last one in your list has a CA-ID of 0, which means FTA. HOwever, this channel is also encrypted, just like the other two. Here's the channels.conf entry I get for that channel: Polsat;Cyfrowy Polsat S.A.:11158:VC56M2S0:S13.0E:27500:257=2:258=pol@4:264:1861,1803,100,1813,B01,500:13101:113:13200:0 What's strange too - VDR reads EPG from all channels so probably it can tune but something is wrong with my setup and the last one can't be played. The EPG data is received as soon as the transponder has been tuned to. A particular channel needs more information, in this case the CA-IDs. Here's szap output: wuwek:/etc/vdr# szap -n 4 -r reading channels from file '/root/.szap/channels.conf' zapping to 4 'Polsat;Cyfrowy Polsat S.A.': sat 0, frequency = 11158 MHz V, symbolrate 2750, vpid = 0x0101, apid = 0x0102 sid = 0x0108 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK and here is user.log: Jun 10 06:16:47 wuwek vdr: [11555] ERROR: no OSD provider available - using dummy OSD! Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: 0.0: status 'ready' ... Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: CaInfo: 0.0 sending CA info Where do these DVBAPI log messages come from? Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
On Sat, Jun 9, 2012 at 5:18 PM, Marx wrote: > What can be wrong if I can tune chanel with szap, but I can't it watch via > streamdev because VDR can't tune it? Is it driver fault? > Marx > Hi, and your VDR and streamdev versions are? -Petri ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR tuning
W dniu 2012-06-09 18:42, Klaus Schmidinger pisze: On 09.06.2012 16:18, Marx wrote: What can be wrong if I can tune chanel with szap, but I can't it watch via streamdev because VDR can't tune it? Is it driver fault? I don't think it's a driver thing if you can tune with szap. Maybe your DiSEqC setup needs to be adjusted. I did but no I don't use Diseqc, so in setup.conf it's: DiSEqC = 0 So is it important that in diseqc.conf I still have Astra and Hotbird defined? Strange is I have only 3 channels on the list: :sat TV TVP 1;CYFRA +:10892:h:S13.0E:27500:166=2:104=pol@4:503:100,1813,500,B00,B01,1803,1861:4807:318:11900:0 TVP 2;CYFRA +:10892:h:S13.0E:27500:167=2:108=pol@4:508:100,1813,500,B00,B01,1803,1861:4808:318:11900:0 Polsat;Cyfrowy Polsat S.A.:11158:v:S13.0E:27500:257=2:258=pol@4:264:0:13101:113:13200:0 and while first two works via streamdev, the last one don't. What's strange too - VDR reads EPG from all channels so probably it can tune but something is wrong with my setup and the last one can't be played. Here's szap output: wuwek:/etc/vdr# szap -n 4 -r reading channels from file '/root/.szap/channels.conf' zapping to 4 'Polsat;Cyfrowy Polsat S.A.': sat 0, frequency = 11158 MHz V, symbolrate 2750, vpid = 0x0101, apid = 0x0102 sid = 0x0108 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK status 1e | signal ea00 | snr | ber | unc | FE_HAS_LOCK and here is user.log: Jun 10 06:16:47 wuwek vdr: [11555] ERROR: no OSD provider available - using dummy OSD! Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: 0.0: status 'ready' Jun 10 06:16:48 wuwek vdr: [11562] CAM 1: module ready Jun 10 06:16:48 wuwek vdr: [11562] DVBAPI: CaInfo: 0.0 sending CA info Jun 10 06:16:48 wuwek vdr: [11564] EPGSearch: search timer update started Jun 10 06:16:48 wuwek vdr: [11565] EPGSearch: timer conflict check started Jun 10 06:16:48 wuwek vdr: [11565] EPGSearch: timer conflict check finished Jun 10 06:16:48 wuwek vdr: [11564] EPGSearch: search timer update finished Jun 10 06:16:49 wuwek vdr: [11562] CAM 1: replies to QUERY - multi channel decryption possible Jun 10 06:16:53 wuwek vdr: [11555] max. latency time 1 seconds Jun 10 06:17:10 wuwek vdr: [11563] Streamdev: Accepted new client (HTTP) 192.168.1.10:3305 Jun 10 06:17:15 wuwek vdr: [11563] Streamdev: Accepted new client (VTP) 127.0.0.1:58677 Jun 10 06:17:15 wuwek vdr: [11574] receiver on device 1 thread started (pid=11555, tid=11574) Jun 10 06:17:15 wuwek vdr: [11572] streamdev-writer thread started (pid=11555, tid=11572) Jun 10 06:17:15 wuwek vdr: [11575] TS buffer on device 1 thread started (pid=11555, tid=11575) Jun 10 06:17:15 wuwek vdr: [11573] streamdev-livestreaming thread started (pid=11555, tid=11573) Jun 10 06:17:15 wuwek vdr: [11563] streamdev-server: closing VTP connection to 127.0.0.1:58677 Jun 10 06:17:19 wuwek vdr: [11559] frontend 0/0 timed out while tuning to channel 3, tp 211158 and here is kern.log, the first part is from szap command and the second with vdr: Jun 10 06:16:02 wuwek kernel: [50490.690106] stv0900_sleep Jun 10 06:16:07 wuwek kernel: [50495.753241] stv0900_init Jun 10 06:16:07 wuwek kernel: [50495.759754] stv0900_set_tone: Off Jun 10 06:16:07 wuwek kernel: [50495.899732] stv0900_set_tone: Off Jun 10 06:16:07 wuwek kernel: [50495.902844] stv0900_search: Jun 10 06:16:07 wuwek kernel: [50495.902854] stv0900_algo Jun 10 06:16:07 wuwek kernel: [50495.905971] stv0900_set_symbol_rate: Mclk 13500, SR 100, Dmd 0 Jun 10 06:16:07 wuwek kernel: [50495.914557] stv0900_set_search_standard Jun 10 06:16:07 wuwek kernel: [50495.914564] Search Standard = DVBS1 Jun 10 06:16:07 wuwek kernel: [50495.918958] stv0900_set_viterbi_acq Jun 10 06:16:07 wuwek kernel: [50495.921613] stv0900_set_viterbi_standard: ViterbiStandard = Jun 10 06:16:07 wuwek kernel: [50495.921617] DVBS1 Jun 10 06:16:07 wuwek kernel: [50495.922500] stv0900_blind_search_algo Jun 10 06:16:07 wuwek kernel: [50495.922503] stv0900_blind_check_agc2_min_level Jun 10 06:16:07 wuwek kernel: [50495.927456] stv0900_set_symbol_rate: Mclk 13500, SR 100, Dmd 0 Jun 10 06:16:08 wuwek kernel: [50496.179589] stv0900_blind_search_algo agc2_int=224 agc2_th=700 Jun 10 06:16:08 wuwek kernel: [50496.269998] lock: srate=741605376 r0=0x0 r1=0x0 r2=0x18 r3=0x2d Jun 10 06:16:08 wuwek kernel: [50496.270006] lock: I2C_DEMOD_MODE_FIELD =0. Search started. tuner freq=1408000 agc2=0x6c1 srate_coarse=23310241 tmg_cpt=10 Jun 10 06:16:08 wuwek kernel: [50496.274593] lock: srate=766246912 r0=0x0 r1=0x0 r2=0x84 r3=0x2d Jun 10 06:16:08 wuwek kernel: [50496.279170] lock: srate=763887616 r0=0x0 r1=0x0 r2=0xb0 r3=0x2c Jun
Re: [vdr] VDR tuning
On 09.06.2012 16:18, Marx wrote: What can be wrong if I can tune chanel with szap, but I can't it watch via streamdev because VDR can't tune it? Is it driver fault? I don't think it's a driver thing if you can tune with szap. Maybe your DiSEqC setup needs to be adjusted. Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] VDR tuning
What can be wrong if I can tune chanel with szap, but I can't it watch via streamdev because VDR can't tune it? Is it driver fault? Marx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr