Goga777 wrote:
Hi
I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264
dvb-s2 channels than some information in femon is
missing -
Apid - 0
Spid - 0
Aspect ratio - reserved
Frame rate - 0.00 Hz
Video format - unknown
Resolution - 0x0
Information about audio
On Sun, 13 Jul 2008, Lauri Tischler wrote:
With DVB-T those are ok, but missing are
Transmission ---
Modulation ---
Coderate --- (H) --- (L)
Guard---
and Bandwith is reported as 7Mhz, should be 8Mhz
The current femon plugin doesn't support multiproto, but for my
knowledge
On Wed, 9 Jul 2008, Goga777 wrote:
Apid - 0
Spid - 0
The pids should work - I cannot see why multiproto/h264/S2 would affect
them.
Aspect ratio - reserved
Frame rate - 0.00 Hz
Video format - unknown
Resolution - 0x0
Information about audio stream - #0
bitrate - free (0 kbit/s)
mpeg
On Sun, 13 Jul 2008, Lauri Tischler wrote:
There are differences between 1.4.x and 1.7.0
..but the common parameters are the same, so I cannot say where the
problem might be until I (or someone else) have debugged it.
BR,
--
rofa
___
vdr mailing
Apid - 0
Spid - 0
The pids should work - I cannot see why multiproto/h264/S2 would affect
them.
where from does femon read apid/vpid ? from channels.conf or from dvb stream
directly (service table)?
in both cases I don't understand how the multiproto can influence on this issue
Goga
On Sun, 13 Jul 2008, Goga777 wrote:
where from does femon read apid/vpid ? from channels.conf or from dvb stream
directly (service table)?
in both cases I don't understand how the multiproto can influence on this
issue
The pids are read directly from VDR's cChannels class:
Hi
I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264 dvb-s2
channels than some information in femon is
missing -
Apid - 0
Spid - 0
Aspect ratio - reserved
Frame rate - 0.00 Hz
Video format - unknown
Resolution - 0x0
Information about audio stream - #0
bitrate - free (0