AW: [vdr] Wakeup On LAN
Well :) .. you've got a solution .. maybe a "normal" board would have also solved the problems. Have you checked S4 regarding Power consumption? How much power is drained? 20W standby translates into 30€ a year .. Martin -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Bernd Juraschek Gesendet: Sonntag, 4. März 2007 22:04 An: vdr@linuxtv.org Betreff: Re: [vdr] Wakeup On LAN Hi, > Regarding waking up at a certain time: > Go to the wiki in read carefully about nvram-wakeup. This damn Siemens D1605 board is not supported by nvram-wakeup. First Siemens has some own checksum calculation and second guess-helper isn't able to guess the CMOS addresses for the alarm clock. Thinking about using ACPI wakeup, cat /proc/acpi/alarm tells me "2007-03-00 19:03:00" with 00 for the day - regardless of the value written into. But - I've not tested this with S4 mode. Alarm wakeup is not urgent for me because I use my router to wakeup the PC the right time. The PC safes the time into the router before it hibernats. The router uses this time to wakeup the PC per WOL. Greetings, Bernd ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
AW: [vdr] Wakeup On LAN
Regarding waking up at a certain time: Go to the wiki in read carefully about nvram-wakeup. Keep also in mind that there are broken bioses around - you need to reboot to put an alarm active. I also have this with my Asus board. Can be done with: echo -e "savedefault --default=3 --once\nquit" | grub --batch /etc/grub/menu.lst default saved .. ### END DEBIAN AUTOMAGIC KERNELS LIST title=Power off root(hd0,0) savedefault 0 halt Martin -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Bernd Juraschek Gesendet: Samstag, 3. März 2007 16:22 An: vdr@linuxtv.org Betreff: Re: [vdr] Wakeup On LAN Hi, Another problem: I would like to use alarm ACPI wakeup for booting the PC before the next recording starts. I've not tried this with hibernate, but with poweroff this also doesn't work. Is this the same problem? Some strange effect is also: --- # echo "2007-03-03 12:00:00" > /proc/acpi/alarm # cat /proc/acpi/alarm 2007-03-00 12:00:00 # --- Thanks for another idea, Bernd ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
AW: [vdr] Wakeup On LAN
Linux usually shuts down all interfaces, when going down (init 0) .. On Ubuntu it's in: /etc/init.d/networking -> it does an "ifconfig eth0 down" Then WOL then will never work, since the LAN-port is without power. You may check for: [EMAIL PROTECTED]:/etc$ ll rc?.d |grep network lrwxrwxrwx 1 root root 20 2006-06-07 20:45 S35networking -> ../init.d/networking lrwxrwxrwx 1 root root 20 2006-06-07 20:45 S35networking -> ../init.d/networking lrwxrwxrwx 1 root root 20 2006-06-07 20:45 S40networking -> ../init.d/networking Try this: go into single user mode with "init 1" - check, if there is still power at your network port. If not, your LAN is shut down. Martin -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Bernd Juraschek Gesendet: Samstag, 3. März 2007 18:53 An: vdr@linuxtv.org Betreff: Re: [vdr] Wakeup On LAN Hi! > Now I've patched my kernel with suspend2. Now after hibernating to > suspend-to-ram or ACPI S4 WOL is working perfectly. Hibernating to > the poweroff mode disables WOL again. Is WOL never possible if the > PC is soft powered off? After powering off the PC per long-pressing the power button WOL works perfectly. The normal shutdown seems to disable wakeup :-( Greetings, Bernd ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
AW: [vdr] Wakeup On LAN
Hi, actually i have the same scenario here. Iuse a Linksys Router with OpenWRT – wol and VDR. 1) Make sure that your Interface does not get down, when Linux shuts down. Control this behavior, with the Links on your Switch or maybe there are also light that must not turn off on your interface. The rc_down_interface is perfect for this 2) Have you set wake on lan with ethtools? -> I do it every boot: /usr/sbin/ethtool -s eth0 wol g 3) The magic packet must be sent to the broadcast address, since ARP requests do not work! -> my /sbin/wol-htpc script wol --ipaddr=192.168.0.255 00:13:d4:1e:94:73 ping 192.168.0.120 Regards, Martin Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Kimmo Taskinen Gesendet: Samstag, 3. März 2007 06:22 An: VDR Mailing List Betreff: Re: [vdr] Wakeup On LAN Have you tried ethtool to setup WoL options? I run "ethtool -s eth0 wol pg". - Kimmo _ Alkuperäinen viesti _ Aihe: [vdr] Wakeup On LAN Tekijä: "Bernd Juraschek" <[EMAIL PROTECTED]> Päivämäärä: 3. maaliskuuta 2007 1:18:32 Hello, I'm trying to wakeup my Siemens Scaleo-T using WOL - but without success :-( The PC to wakeup: - Siemens Scaleo-T AMD64 with Onboard LAN (Tulip chip) - Linux 2.6.20 with ACPI enabled - Gentoo amd64 The router: - ASUS WL-500g Deluxe - OpenWrt White Russian - With X-Wrt Extensions RC6 - WOL-Software: wol What I've done: - BIOS: Wakeup controlled by BIOS and WOL enabled - Gentoo: echo -n PCI0 > /proc/acpi/wakeup ; halt - Router: wol -h PC-IP-Addr PC-MAC-Addr I've configured the router to start wol periodically. On the PC wireshark is now showing incoming UDP packets to the UDP port 4. The packet contains the ethernet frame, the IP header, the UDP header and the magic data (6x 0xff and 16x MAC-Addr). It seems all ok - but the PC will not be started. What's going wrong? Should I use some ACPI sleep mode? Is this supported by the DVB drivers? Is the Siemens PC not usable for WOL? Thanks for help, Bernd -- Obwohl das Weltall expandiert, findet man nirgendwo Parkplätze. -- BR Space night ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr