Hi!
Thanks or your answer!
First how to find out which Smartcard I got, I can't find any label on
the card and the vdr CAM setup doesn't show something about X or W models.
And second, the TPS card worked without problems until some weeks ago, I
thought there has been an change in the encryptio
st the TPS reciever can handle old ones.
Message du 05/09/06 00:13
De : "Marco Göbenich" <[EMAIL PROTECTED]>
A : "VDR Mailing List"
Copie à :
Objet : Re: [vdr] TF1 problem [was: Viaccess Cam Update]
Hi!
This would not work while my original TPS receiver has only
t;VDR Mailing List"
> Copie à :
> Objet : Re: [vdr] TF1 problem [was: Viaccess Cam Update]
>
> Hi!
>
> This would not work while my original TPS receiver has only a slot for
> the smartcard, not for a CAM.
>
> Has nobody else problems to receive TF1?
>
Hi!
This would not work while my original TPS receiver has only a slot for
the smartcard, not for a CAM.
Has nobody else problems to receive TF1?
Am I the first person who tries to update CAM firmware with VDR?
Regards
Marco
Gregoire Favre schrieb:
On Mon, Sep 04, 2006 at 11:47:15AM +02
On Mon, Sep 04, 2006 at 11:47:15AM +0200, Marco Göbenich wrote:
> Has nobody a glue on this!
Take your CAM, put it on an official TPS receiver, tune on it to the specified
transponder, wait... and take your CAM back to your VDR box...
I haven't tested it, but I am quiete certain it should work :
Hi!
Has nobody a glue on this!
Regards
Marco
Marco Goebenich schrieb:
Hi!
I got a problem while receiving TF1 (TPS France). I can tune to this
channel, and then view the channels for about 20 seconds, but after that
the stream stops, the screen is somehow distorted, if I switch again to