Re: [vdr] ff card tt dvb-s 2300
Hello and thanks a lot for your answers! On Mo, Feb 26, 2007 at 08:33:56 +0100, bastlir wrote: > I've tested it both and got following results: > It really seems to be depend on signal strength - when strength of signal is > approximately about 2/3 and little less (60%) the problem appears but first > at some channels (not depending bitrate but seems to be depending on GOP > length) - channels with longer GOP's are distorted first. After reloading fw > into ff-card the problem disappears. It seems like a problem of FW of > ff-card. > You know perhaps that I am not familiar with the femon output. You say 2/3 what must be the signal and snr vallue for that? Halim ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
On Wednesday 21 February 2007 15:36, bastlir wrote: > On Wednesday 21 February 2007 14:33, Halim Sahin wrote: > > Hi, > > > > On Mi, Feb 21, 2007 at 02:20:15 +0100, bastlir wrote: > > > On Wednesday 21 February 2007 14:03, Halim Sahin wrote: > > > > Hello, > > > > > > > > HMM what do you mean? > > > > I am getting these errors on all transponders. > > > > > > I meant to test as well on channel with high bitrate as german channels > > > as well as on some channels with lower bitrate (<2Mbps, for ex. Q TV > > > SHOP @12148H). > > > Are you using for output some sw decoder like softdevice, xine etc. or > > > are you using TV output from card? > > > > kI am using the tv output of the ff-card. > > High or low bitrates makes no difference. > > There are dropouts on all transponders. > > > > Halim > > So I'm sorry I don't know how to help you. I sometimes have similar > problems, but only on specific channels (channels I'm normally not > interested in) - this was the reason of my question. > > Regards I have two FF cards in 2 PC's - in one is ver. 2.3 modded (== 2300) (Sempron 3100+) and in the second is equipped with ver. 2.2 (P4 3.2GHz HT). I've tested it both and got following results: It really seems to be depend on signal strength - when strength of signal is approximately about 2/3 and little less (60%) the problem appears but first at some channels (not depending bitrate but seems to be depending on GOP length) - channels with longer GOP's are distorted first. After reloading fw into ff-card the problem disappears. It seems like a problem of FW of ff-card. Regards ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
On Wednesday 21 February 2007 14:33, Halim Sahin wrote: > Hi, > > On Mi, Feb 21, 2007 at 02:20:15 +0100, bastlir wrote: > > On Wednesday 21 February 2007 14:03, Halim Sahin wrote: > > > Hello, > > > > > > HMM what do you mean? > > > I am getting these errors on all transponders. > > > > I meant to test as well on channel with high bitrate as german channels > > as well as on some channels with lower bitrate (<2Mbps, for ex. Q TV SHOP > > @12148H). > > Are you using for output some sw decoder like softdevice, xine etc. or > > are you using TV output from card? > > kI am using the tv output of the ff-card. > High or low bitrates makes no difference. > There are dropouts on all transponders. > > Halim So I'm sorry I don't know how to help you. I sometimes have similar problems, but only on specific channels (channels I'm normally not interested in) - this was the reason of my question. Regards ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
Hi, On Mi, Feb 21, 2007 at 02:20:15 +0100, bastlir wrote: > On Wednesday 21 February 2007 14:03, Halim Sahin wrote: > > Hello, > > > > HMM what do you mean? > > I am getting these errors on all transponders. > > I meant to test as well on channel with high bitrate as german channels as > well as on some channels with lower bitrate (<2Mbps, for ex. Q TV SHOP > @12148H). > Are you using for output some sw decoder like softdevice, xine etc. or are > you > using TV output from card? > kI am using the tv output of the ff-card. High or low bitrates makes no difference. There are dropouts on all transponders. Halim ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
On Wednesday 21 February 2007 14:03, Halim Sahin wrote: > Hello, > > HMM what do you mean? > I am getting these errors on all transponders. I meant to test as well on channel with high bitrate as german channels as well as on some channels with lower bitrate (<2Mbps, for ex. Q TV SHOP @12148H). Are you using for output some sw decoder like softdevice, xine etc. or are you using TV output from card? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
Hello, > > I have similar values (tt 2300): > status 1f | signal aef8 | snr d66e | ber | unc | FE_HAS_LOCK > status 1f | signal aef4 | snr d680 | ber | unc | FE_HAS_LOCK > status 1f | signal aefb | snr d62f | ber | unc | FE_HAS_LOCK > status 1f | signal aef1 | snr d62f | ber | unc | FE_HAS_LOCK > > Are you sure this is a signal problem? Are you getting these problems at all > transponders? > Try to check dependency of errors on bitrate of video/audio. > HMM what do you mean? I am getting these errors on all transponders. Sometimes there are no errors for 15 minutes. Sometimes there are errors for 4 minutes etc. I read a lot of stuff in vdr-portal and tested many driver firmware combinations. The last thing was the signal but if you are right and these femon output lines are ok I have no ideas what to test now. Again my skystar2 in my other pC works fine. The telestar receiver works fine only the tt card doesn't. Please help. Halim ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ff card tt dvb-s 2300
On Wednesday 21 February 2007 12:33, Halim Sahin wrote: > Hello, > > I am getting ts continuity errors in vdr with my tt 2300. > Since 3 weeks I am trying to optimize my system. > Now there is the Question of signal Problems. > I did not have any problems with my other telestar receiver so I did not > check the signal before. > Femon shows the folowing on RTL on astra 19,2. > status 1f | signal ac7c | snr d6dd | ber 1200 | unc | > FE_HAS_LOCK > status 1f | signal ac73 | snr d6dd | ber | unc | > FE_HAS_LOCK > status 1f | signal ac7b | snr d6f2 | ber | unc | > > > Are these values ok or not? > Can someone compare these output with the same card? > Thanks Hello, I have similar values (tt 2300): status 1f | signal aef8 | snr d66e | ber | unc | FE_HAS_LOCK status 1f | signal aef4 | snr d680 | ber | unc | FE_HAS_LOCK status 1f | signal aefb | snr d62f | ber | unc | FE_HAS_LOCK status 1f | signal aef1 | snr d62f | ber | unc | FE_HAS_LOCK Are you sure this is a signal problem? Are you getting these problems at all transponders? Try to check dependency of errors on bitrate of video/audio. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
