Hi,
An easy diseqc configuration setup will be useful in core VDR (+1).
The reelbox had such a feature in the past don't know if current versions
do.
Regards
halim
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vd
On 4/27/09, marti...@embl.de wrote:
> To enable/disable GotoStoredPosition we would need a setting (on/off)
> on the Diseqc setup menu
IMHO, VDR needs multi satellite support bundled with it (via diseqc
1.2), which could be achieved either in the core, or as a bundled
plugin. The plugin should:
To enable/disable GotoStoredPosition we would need a setting (on/off)
on the Diseqc setup menu
If on, then in diseqc.conf commands like are sent to the rotor:
S19.2E 11700 V 9750 t W15 [E0 31 6B 01] W15 v t
S19.2E 9 V 10600 t W15 [E0 31 6B 01] W15 v T
S19.2E 11700 H 9750 t W15 [E0 31 6
On 25.04.2009 19:18, marti...@embl.de wrote:
> As you probably know the rotor plugin is rather buggy by now as it has more
> patches than code.
> It would be not be necessary if vdr had an option ´Enable GotoPosition
> ´
> and if enabled it sent the diseqc command E0 31 6B XX which means ´First
>
> If you want to address individual LNBs separately you can do so
> via the diseqc.conf file. Set "Setup/LNB/Use DiSEqC" to yes and
> make the appropriate entries in diseqc.conf.
>
I will give it a try after reading the diseq.conf section in the
manpage.
Thanks
Halim
__
Halim Sahin wrote:
From: "Klaus Schmidinger" <[EMAIL PROTECTED]>
To:
Halim Sahin wrote:
Hello Klaus,
Some LNB's don't get a lock while switching to a special frequency.
After a small change in the Frequency it works
e. G. 12630->12629 ...
Such a small deviation shouldn't be much of a prob
From: "Klaus Schmidinger" <[EMAIL PROTECTED]>
To:
Halim Sahin wrote:
Hello Klaus,
Some LNB's don't get a lock while switching to a special frequency.
After a small change in the Frequency it works
e. G. 12630->12629 ...
Such a small deviation shouldn't be much of a problem.
Are you sure th
Halim Sahin wrote:
Hello Klaus,
Some LNB's don't get a lock while switching to a special frequency.
After a small change in the Frequency it works
e. G. 12630->12629 ...
Such a small deviation shouldn't be much of a problem.
Are you sure that's a probem with the LNB?
Some receivers can set a