Jimi: Thanks a lot. I use JB Weld all the time for other things, but just never
thought about it in these terms. I’ll try it. Chuck
From: Jimi, AKA Desert Eagle
Sent: Monday, January 13, 2014 9:03 AM
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Repairing my boat's tiny cracks, and pinholes
core only. Thanks,
Chuck
From: Joyce M Westphal
Sent: Monday, January 13, 2014 4:35 AM
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Repairing my boat's tiny cracks, and pinholes
For those pinhole cracks, we use short hair fiberglass. It is really hard to
sand smooth, so put it on very
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Repairing my boat's tiny cracks, and pinholes
I go along with Jimi on this. I repaired an aluminum boat about five years ago
with JB weld. I have since sold it but as far as I know it is still doing fine.
Tony
On Monday, January 13, 2014 9:03 AM
For those pinhole cracks, we use short hair fiberglass. It is really hard
to sand smooth, so put it on very carefully and smoothly. You will still
want to sand it, then put on a good waterproof primer, paint and spar
finish. Your boat has many years left so enjoy after you refinish. Joyce
On
Instructor
Long Range Precision Rifle Instructor
- Original Message -
From: Chuck Alexander
To: fly fishing for panfish ; vfb-mail@googlegroups.com
Sent: Monday, January 13, 2014 3:18 AM
Subject: [VFB] Repairing my boat's tiny cracks, and pinholes
Folks: My old jon boat is probably older
Precision Rifle Instructor
- Original Message -
From: Chuck Alexander
To: fly fishing for
panfish ; vfb-mail@googlegroups.com
Sent: Monday, January 13, 2014 3:18 AM
Subject: [VFB] Repairing my boat's tiny cracks, and
pinholes
Folks: My old jon boat is probably older than me (see
