I've described the theoretical background and measurements on my
LTZ1000 references (2 on my own, one identical of another volt-nut) parts
#1
-#6, starting here:
http://www.eevblog.com/forum/projects/ultra-precision-reference-ltz1000/165/
Those 0.1% wirewound resistors, are available from
Hello Randy,
another source could be the UPW50 or UPW25 series of wire wound resistors.
Some values are available at RS-Components.
the 70K = 50K + 20K
the 12,5K = 10K + 2K + 500R (50 degrees setpoint temperature)
another possibility is the trimming service of DigiKey for VSMP resistors.
Dave,
well the schematic is the same as in the LT specification.
My PCB is a prototype, and I would not like to publish it, because it
contains several bugs.
One one those bugs led to the first change of the initial LT
specification, i.e. I discovered the parasitic diode in parallel to the
Frank Stellmach wrote:
Dave,
well the schematic is the same as in the LT specification.
My PCB is a prototype, and I would not like to publish it, because it
contains several bugs.
One one those bugs led to the first change of the initial LT
specification, i.e. I discovered the parasitic diode