Time were very helpful when I asked about a schematic for an oldĀ 1017.
On 06/11/2017 00:52, Illya Tsemenko wrote:
> Hi George,
>
> k
>
>
> On September 18, 2017 7:03:56 AM GMT+08:00, george
> wrote:
>> Hi all
>>
>> I have a Time Electronics 9822 Multifunction AC-DC
I have recently acquired a Guildline 9330 10K resistor (thank you Phil).
One of my meters says 10,001.251 ohms at a room temperature of about 19.4C
which is a long way from 2.5ppm or even 12.5ppm (allowing for 5C at 2ppm
worst case).
Now the question has to be where in the UK (ideally in the
I just had an email from Prema about this - - long story short: In this
particular application, the DS1220AD isn't a good replacement for the DS1220Y
as the timings differ enough to cause a problem.
Prema suggested to use a ST M48Z02-150PC1, so I've ordered one from CPC.
Dave
-Original
Hi Dave;
I do not think the resistance can be adjusted if that is what you are thinking,
they will just document the actual value.
But the most important thing is stability.
Cheers;
Thomas Knox
From: volt-nuts on behalf of David