Hi Dave; I do not think the resistance can be adjusted if that is what you are thinking, they will just document the actual value.
But the most important thing is stability. Cheers; Thomas Knox ________________________________ From: volt-nuts <[email protected]> on behalf of David C. Partridge <[email protected]> Sent: Monday, November 6, 2017 8:43 AM To: 'Discussion of precise voltage measurement' Subject: [volt-nuts] Get 10K resistor calibrated in UK I have recently acquired a Guildline 9330 10K resistor (thank you Phil). One of my meters says 10,001.251 ohms at a room temperature of about 19.4C which is a long way from 2.5ppm or even 12.5ppm (allowing for 5C at 2ppm worst case). Now the question has to be where in the UK (ideally in the Midlands) can I get an accurate calibration of this standard resistor at a reasonable cost? Thanks Dave _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts volt-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts> www.febo.com volt-nuts is a low volume, high SNR list for the discussion of precise voltage measurement and related topics. To see the collection of prior postings to the list ... and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
