Hi Eric,
I have made progress and have constructed a new reactor optimized to allow
low energy photons to escape. These would be unmistakable signatures of
LENR without having to be so optimized to show excess heat to the extent it
proves a nuclear source. I have seen transient heat bursts and I
On Fri, Feb 7, 2014 at 7:43 AM, Bob Higgins wrote:
Rossi has stated that he starts with 10 micron sized particles (since
> identified as a nickel powder produced from the carbonyl process), adds a
> catalyst (widely believed to be a nanopowder of some kind), and processes
> the mix "in a way that
I believe that some fractionation must be taking place, but not to phonons.
Phonons are contra-indicated by the experimental evidence. Phonons
dissipate rapidly to heat with a decay constant that is based on the
acoustic velocity. This means that the temperature will be extremely high
near the n
Fran--
I agree fully.
Bob Cook
- Original Message -
From: Roarty, Francis X
To: vortex-l@eskimo.com
Sent: Friday, February 07, 2014 5:36 AM
Subject: RE: EXTERNAL: RE: [Vo]:MIT Course Day 5 -- NiH Systems
IMHO grain size and geometry of these "other" alloys
to form is
questionable.
Bob
- Original Message -
From: Bob Higgins
To: vortex-l@eskimo.com
Cc: Bob Higgins
Sent: Friday, February 07, 2014 7:43 AM
Subject: Re: EXTERNAL: RE: [Vo]:MIT Course Day 5 -- NiH Systems
Rossi has stated that he starts with 10 micron sized partic
Ah. "tubercles" instead of tubules . Thanks Bob
From: Bob Higgins
Rossi has stated that he starts with 10 micron sized particles (since
identified as a nickel powder produced from the carbonyl process), adds a
catalyst (widely believed to be a nanopowder of some kind), and processes
the
Rossi has stated that he starts with 10 micron sized particles (since
identified as a nickel powder produced from the carbonyl process), adds a
catalyst (widely believed to be a nanopowder of some kind), and processes
the mix "in a way that leads to amplified tubercles on the surface".
A search of
As Eric realizes, this is a critical issue for anyone wanting to replicated
Rossi.
In fact, the material shown in the previous image, could indeed be called
“micron sized” and one would not be dishonest. However the importance of hollow
nickel tube could be the sine qua non of the Rossi sche
"morphing through some kind of process of entropy"
I think you are right, Vacuum = Entropy = Uncertainty!
On Fri, Feb 7, 2014 at 10:00 AM, Eric Walker wrote:
> On Fri, Feb 7, 2014 at 6:53 AM, Jones Beene wrote:
>
> Does anyone have the citation for Rossi's nickel lattice having "tubules"?
>>
On Fri, Feb 7, 2014 at 6:53 AM, Jones Beene wrote:
Does anyone have the citation for Rossi’s nickel lattice having “tubules”?
> Cannot find it. But check this out.
>
Yes, please. If anyone has a reference to Rossi using nickel with
"tubules," "nanotubules," "nanohairs," etc., please provide it
From: Roarty, Francis X
Bob,
Much discussion regarding micro “tubule” geometry of
Rossi powders leads many of us to consider the hair like protrusions as
forming nano geometry between the grains as they pack to form a bulk powder.
[mailto:jone...@pacbell.net]
Sent: Thursday, February 06, 2014 5:50 PM
To: vortex-l@eskimo.com
Subject: EXTERNAL: RE: [Vo]:MIT Course Day 5 -- NiH Systems
-Original Message-
From: Bob Cook
> Also I suspect that the nano Ni that is produced is pretty pure. That
> may be why Rossi u
IMHO grain size and geometry of these "other" alloys as powders will have a
major effect on their LENR activity.
Fran
From: Jones Beene [mailto:jone...@pacbell.net]
Sent: Thursday, February 06, 2014 5:16 PM
To: vortex-l@eskimo.com
Subject: EXTERNAL: RE: [Vo]:MIT Course Day 5 -- NiH Sys
13 matches
Mail list logo