RE: [Vo]:Blast from the past -

[Jones Beene]

Robin - Go for it. 

Here is a site for the relevant frequencies for maximum water resonance. The
wavelength of a typical oven magnetron is unfortunately too long. For
recycling water vapor in air- a practical resonance is 183 GHz - about 100
times better than the oven, which can be achieved with a simple Gunn diode.

http://www.mwl.sci-nnov.ru/res_%20spectr_ex.html


-Original Message-
From: mix...@bigpond.com 

Actually this invention has all that would be needed for Hydrino production.
The microwaves ionize some water molecules creating free H atoms which could
then be catalyzed by other free water molecules. The ensuing VUV and soft
x-rays help out with further ionizations.

In short I have often wondered if this might work, at least to some extent.

>Cleaning out old email, and this post turned up from 20 years ago (edited).
>Needless to say, yet another false alarm in the quest for that miracle 
>shortcut to free energy. OTOH it was definitely as green as. err.
>freshly-mowed grass.
>
>Date: 28 Oct 1995
>From: Eugene Mallove (on behalf or unnamed inventor)
>To: Vortex 
>Subject: PUBLIC DISCLOSURE - NEW INVENTION
>
>The device is an internal combustion engine in which small quantities 
>of water are turned into steam by the use of a magnetron (as found in 
>microwave ovens)..

RE: [Vo]:Blast from the past -

[Jones Beene]

Robin, rather than use a piston engine for this concept, it might be
possible to convert a motorcycle turbocharger to "burn" water vapor.  These
are low-priced- check eBay. This could be closed-cycle and would probably
work best at a partial vacuum for better ionization.



Here is a site for the relevant frequencies for maximum water resonance. The
wavelength of a typical oven magnetron is unfortunately too long. For
recycling water vapor in air- a practical resonance is 183 GHz - about 100
times better than the oven, which can be achieved with a simple Gunn diode.

http://www.mwl.sci-nnov.ru/res_%20spectr_ex.html


-Original Message-
From: mix...@bigpond.com 

Actually this invention has all that would be needed for Hydrino production.
The microwaves ionize some water molecules creating free H atoms which could
then be catalyzed by other free water molecules. The ensuing VUV and soft
x-rays help out with further ionizations.

In short I have often wondered if this might work, at least to some extent.

>Cleaning out old email, and this post turned up from 20 years ago (edited).
>Needless to say, yet another false alarm in the quest for that miracle 
>shortcut to free energy. OTOH it was definitely as green as. err.
>freshly-mowed grass.
>
>Date: 28 Oct 1995
>From: Eugene Mallove (on behalf or unnamed inventor)
>To: Vortex 
>Subject: PUBLIC DISCLOSURE - NEW INVENTION
>
>The device is an internal combustion engine in which small quantities 
>of water are turned into steam by the use of a magnetron (as found in 
>microwave ovens)..

Re: [Vo]:Blast from the past -

[mixent]

In reply to  Jones Beene's message of Sat, 28 Nov 2015 07:45:02 -0800:
Hi,

Actually this invention has all that would be needed for Hydrino production. The
microwaves ionize some water molecules creating free H atoms which could then be
catalyzed by other free water molecules. The ensuing VUV and soft x-rays help
out with further ionizations.

In short I have often wondered if this might work, at least to some extent.

>
>Cleaning out old email, and this post turned up from 20 years ago (edited).
>Needless to say, yet another false alarm in the quest for that miracle
>shortcut to free energy. OTOH it was definitely as green as. err.
>freshly-mowed grass.
>
>Date: 28 Oct 1995 
>From: Eugene Mallove (on behalf or unnamed inventor)
>To: Vortex 
>Subject: PUBLIC DISCLOSURE - NEW INVENTION
>
>The device is an internal combustion engine in which small quantities of
>water are turned into steam by the use of a magnetron (as found in microwave
>ovens)..
>
[snip]
Regards,

Robin van Spaandonk

http://rvanspaa.freehostia.com/project.html

[Vo]:Blast from the past -

[Jones Beene]

Cleaning out old email, and this post turned up from 20 years ago (edited).
Needless to say, yet another false alarm in the quest for that miracle
shortcut to free energy. OTOH it was definitely as green as. err.
freshly-mowed grass.

Date: 28 Oct 1995 
From: Eugene Mallove (on behalf or unnamed inventor)
To: Vortex 
Subject: PUBLIC DISCLOSURE - NEW INVENTION

The device is an internal combustion engine in which small quantities of
water are turned into steam by the use of a magnetron (as found in microwave
ovens)..

Inventor: "The engine I have invented is far more efficient than any other
steam engine because the efficiency of the magnetron in turning water into
steam. In fact, the water droplet 'explodes' very much like air/gasoline
explodes in a conventional internal combustion engine.."

The following is an outline of how to construct the device and a few
cautions:

PARTS NEEDED:

1. Magnetron from medium power microwave oven.

2. Small 4-stroke single cylinder lawn mower engine or similar engine with
'old style' points and ignition system.

3.  Automotive alternator with built-in rectifier and regulator, also a 12
volt auto battery.

4. "Trigger" mechanism from an aircraft "strobe" landing light.

INSTRUCTIONS:

1. The magnetron fits into the spark plug hole.

2. The distributor points are modified so that the contact is closed when
the piston is at the top dead center and this contact is used to activate
the aircraft strobe mechanism.

3.  The high voltage from the strobe is connected to directly fire the
magnetron which in turn produces steam which moves the piston.

4. The engine turns the alternator which keeps the battery charged, which
supplies the electrical power for the magnetron.

SPREAD THIS TECHNOLOGY - IT IS FREE!!

PRINT THIS BEFORE IT IS DELETED FROM THE NET!

MY CODE FOR FUTURE IDENTIFICATION IS PANGURBAN


Fast forward two decades . the silence is deafening. Maybe Pangurban was
holding out for Bill Gates money, or maybe like the geniuses at SHT - the
military slapped a gag order, or else the MIB came calling ?

Note: the inventor never says that the battery does not run down, only
implies that it is "recharged" which can arguably be a partial recharge - so
- one cannot label it an outright fabrication.

BTW - still waiting for the free energy flashlight from ADGEX. Looking like
yet another free energy scam.

Re: [Vo]:Blast from the past -

[H Ucar]

Regarding RAR:
They had modified the machine design around the telescopic arm and weights in 
the course of building. Without more info its a mistery.
H Ucar

Re: [Vo]:Blast from the past -

[a.ashfield]

Jones,

One of my favorites was RAR Energia's gravity motor.
http://www.rarenergia.com.br/

After going quiet for more than a year they have posted a number of new 
diagrams in November.  They didn't make me any wiser and I suspect if it 
really worked we would have seen a video of it running by now.


At least it was an impressive effort to build TWO such machines!

Re: [Vo]:Blast from the past -

[Eric Walker]

On Sat, Nov 28, 2015 at 9:45 AM, Jones Beene  wrote:

> SPREAD THIS TECHNOLOGY - IT IS FREE!!
>
> PRINT THIS BEFORE IT IS DELETED FROM THE NET!
>
> MY CODE FOR FUTURE IDENTIFICATION IS PANGURBAN
>
I laughed a lot with this whole email.  This part was especially fun.

Eric

Re: [Vo]:blast from the past

[Harvey Norris]

Wasn't Tom Beardons MEG made from a special ferromagnetic metglassPioneering 
the Applications of Interphasal Resonances 
http://tech.groups.yahoo.com/group/teslafy/ 

 On Saturday, February 14, 2015 7:16 PM, Alain Sepeda 
alain.sep...@gmail.com wrote:
   

 
2015-02-13 16:04 GMT+01:00 Jones Beene jone...@pacbell.net:

EP 0461690 A2

the zeolithe structure let me think they were not far from todays ideas on 
nanostructured material

   

Re: [Vo]:blast from the past

[Terry Blanton]

Originally from 320.  Others tried 630 and 1000.

https://drive.google.com/file/d/0B8mt4mJOTGvBQVMtTHFSTC1fQWM/view?usp=sharing

On Sun, Feb 15, 2015 at 10:23 AM, Harvey Norris harv...@yahoo.com wrote:
 Wasn't Tom Beardons MEG made from a special ferromagnetic metglass
 Pioneering the Applications of Interphasal Resonances
 http://tech.groups.yahoo.com/group/teslafy/


 On Saturday, February 14, 2015 7:16 PM, Alain Sepeda
 alain.sep...@gmail.com wrote:



 2015-02-13 16:04 GMT+01:00 Jones Beene jone...@pacbell.net:

 EP 0461690 A2


 the zeolithe structure let me think they were not far from todays ideas on
 nanostructured material

Re: [Vo]:blast from the past

[Alain Sepeda]

2015-02-13 16:04 GMT+01:00 Jones Beene jone...@pacbell.net:

 EP 0461690 A2


the zeolithe structure let me think they were not far from todays ideas on
nanostructured material

RE: [Vo]:blast from the past

[Jones Beene]

From: Alain Sepeda

EP 0461690 A2 …the zeolite structure let me think they were not far from todays 
ideas on nanostructured material…

Both zeolites and Raney nickel have intrigued researchers over the years in the 
context of reactivity with hydrogen at nanoscale dimensions, but many 
experiments have come up short… well, not really short but unconvincing. 

Many experiments with zeolites and Raney nickel seem to show low COP in the 
range of 1.1 to 1.2 which is still in the noise level but begging for more 
research. 

[Vo]:blast from the past

[Jones Beene]

Boeing - a cold fusion pioneer ??

Stumbled upon this old Boeing patent application, with priority going back
to 1990

Cold nuclear fusion thermal generator   EP 0461690 A2

Abstract
A method and apparatus are provided for generating heat energy by the cold
fusion of hydrogen with boron or lithium in an electrolytic cell.

This was probably a case of a strategic filing, coming after the big
announcement in Utah and based more on informed speculation than reduction
to practice - and one wonders if Boeing actually built a working prototype.
Here is a presentation by the inventor from 1983 ! which indicates that
Boeing was interested in a portable fusion device long before PF

http://commons.erau.edu/space-congress-proceedings/proceedings-1983-20th/ses
sion-iia/2/