12:24 AM
To: Neale Ranns (nranns) ; Hu, Xuekun ;
Eyal Bari (ebari) ; vpp-dev@lists.fd.io
Cc: vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Problem on VxLAN multicast mode
To answer another question from Xuekun about usage of VXLAN mcast tunnel, the
advantage is that flooding to remote VTEPs only
-Original Message-
From: Neale Ranns (nranns)
Sent: Monday, November 05, 2018 11:00 AM
To: John Lo (loj) ; Xuekun ; Eyal Bari
(ebari) ; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Problem on VxLAN multicast mode
Hi Eyal, John,
I missed the fact that the tunnel classification is based
8 à 16:17
À : Xuekun , "Eyal Bari (ebari)" ,
"vpp-dev@lists.fd.io"
Cc : "vpp-dev@lists.fd.io"
Objet : Re: [vpp-dev] Problem on VxLAN multicast mode
VPP does not support receiving of VXLAN packets from an unknown VTEP.
Thus, any packet received in a BD from a VXL
-dev@lists.fd.io On Behalf Of Xuekun
Sent: Monday, November 05, 2018 8:07 AM
To: Eyal Bari (ebari) ; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Problem on VxLAN multicast mode
Hi, Eyal
If need to create a unicast tunnel also, it means need to know the remote vtep
address first. However the purpose
l.
Is my understanding about mcast tunnel not correct?
Thanks.
Thx, Xuekun
-Original Message-
From: Eyal Bari (ebari)
Sent: Monday, November 05, 2018 7:58 PM
To: Hu, Xuekun ; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Problem on VxLAN multicast mode
Just to clarify, the mcast t
Just to clarify, the mcast tunnel does not need to be under the bridge for
receiving traffic, however for sending flooded traffic through the mcast tunnel
it needs to be under the bridge...
eyal
On 05/11/2018, 13:47, "vpp-dev@lists.fd.io on behalf of eyal bari via
Lists.Fd.Io"
wrote:
Hi, Xuekun,
Packets are only received on unicast tunnels.
So in your case you would need to create one and put it under the bridge-domain
(the multicast tunnel does not need to be under the bridge-domain):
create vxlan tunnel src 172.168.1.1 dst 172.168.1.2 vni 100
set interface l2
Hi, All
I'm configuring VPP as VxLAN multicast mode over multiple servers. To simplify
the topology, I only used two servers: server1 as VPP; server2 using vxlan
kernel mode.
Server1:
set interface state TenGigabitEthernet3d/0/1 up
set interface ip address TenGigabitEthernet3d/0/1
