Re: [Vyatta-users] Cluster heartbeat / change to ucast?
Thanks, again! -Original Message- From: Justin Fletcher [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 04, 2008 2:07 PM To: Chad Hurley Cc: [EMAIL PROTECTED] Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast? Not yet, but it is one of the enhancements requested in bug 2730 (https://bugzilla.vyatta.com/show_bug.cgi?id=2730). To keep it a permanent setting, you can modify the perl script that generates it; it's /opt/vyatta/sbin/vyatta-update-cluster.pl in VC4. Best, Justin On Tue, Mar 4, 2008 at 11:01 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > Thanks for the reply. Do you know if it is possible to specify this in > the Vyatta configuration so that you don't need to reconfigure it each > time? -CH > > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Justin > Fletcher > Sent: Tuesday, March 04, 2008 11:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast? > > Yes, you can edit the configuration directly; however, you'll need to > modify > it again on reboot as it's created from the Vyatta configuration. > > Best, > Justin > > On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > > > > > > > > > > The heartbeat from my Vyatta cluster is creating errors on another > cluster > > on my network. I would like to change the default bcast heartbeat to > ucast. > > Does anyone know if it is save to edit the following file directly > without > > any adverse affects? > > > > > > > > File: > > > > /etc/ha.d/ha.cf > > > > > > > > Current config: > > > > keepalive 1 > > > > deadtime 4 > > > > warntime 2 > > > > initdead 120 > > > > logfacility daemon > > > > bcast eth0 eth1 > > > > auto_failback off > > > > node riv1 riv2 > > > > ping 192.168.5.3 192.168.0.221 > > > > respawn hacluster /usr/lib/heartbeat/ipfail > > > > > > > > I would like to replace the bcast line with: > > > > ucast eth0 192.168.5.5 > > > > ucast eth1 192.168.0.252 > > > > > > > > Anyone had luck with this type of config? > > > > > > > > Thanks, > > > > Chad > > > > > > > > > > ___ > > Vyatta-users mailing list > > Vyatta-users@mailman.vyatta.com > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > > ___ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
Re: [Vyatta-users] Cluster heartbeat / change to ucast?
Not yet, but it is one of the enhancements requested in bug 2730 (https://bugzilla.vyatta.com/show_bug.cgi?id=2730). To keep it a permanent setting, you can modify the perl script that generates it; it's /opt/vyatta/sbin/vyatta-update-cluster.pl in VC4. Best, Justin On Tue, Mar 4, 2008 at 11:01 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > Thanks for the reply. Do you know if it is possible to specify this in > the Vyatta configuration so that you don't need to reconfigure it each > time? -CH > > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Justin > Fletcher > Sent: Tuesday, March 04, 2008 11:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast? > > Yes, you can edit the configuration directly; however, you'll need to > modify > it again on reboot as it's created from the Vyatta configuration. > > Best, > Justin > > On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > > > > > > > > > > The heartbeat from my Vyatta cluster is creating errors on another > cluster > > on my network. I would like to change the default bcast heartbeat to > ucast. > > Does anyone know if it is save to edit the following file directly > without > > any adverse affects? > > > > > > > > File: > > > > /etc/ha.d/ha.cf > > > > > > > > Current config: > > > > keepalive 1 > > > > deadtime 4 > > > > warntime 2 > > > > initdead 120 > > > > logfacility daemon > > > > bcast eth0 eth1 > > > > auto_failback off > > > > node riv1 riv2 > > > > ping 192.168.5.3 192.168.0.221 > > > > respawn hacluster /usr/lib/heartbeat/ipfail > > > > > > > > I would like to replace the bcast line with: > > > > ucast eth0 192.168.5.5 > > > > ucast eth1 192.168.0.252 > > > > > > > > Anyone had luck with this type of config? > > > > > > > > Thanks, > > > > Chad > > > > > > > > > > ___ > > Vyatta-users mailing list > > Vyatta-users@mailman.vyatta.com > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > > ___ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
Re: [Vyatta-users] Cluster heartbeat / change to ucast?
Thanks for the reply. Do you know if it is possible to specify this in the Vyatta configuration so that you don't need to reconfigure it each time? -CH -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin Fletcher Sent: Tuesday, March 04, 2008 11:16 AM To: [EMAIL PROTECTED] Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast? Yes, you can edit the configuration directly; however, you'll need to modify it again on reboot as it's created from the Vyatta configuration. Best, Justin On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > > > > > The heartbeat from my Vyatta cluster is creating errors on another cluster > on my network. I would like to change the default bcast heartbeat to ucast. > Does anyone know if it is save to edit the following file directly without > any adverse affects? > > > > File: > > /etc/ha.d/ha.cf > > > > Current config: > > keepalive 1 > > deadtime 4 > > warntime 2 > > initdead 120 > > logfacility daemon > > bcast eth0 eth1 > > auto_failback off > > node riv1 riv2 > > ping 192.168.5.3 192.168.0.221 > > respawn hacluster /usr/lib/heartbeat/ipfail > > > > I would like to replace the bcast line with: > > ucast eth0 192.168.5.5 > > ucast eth1 192.168.0.252 > > > > Anyone had luck with this type of config? > > > > Thanks, > > Chad > > > > > ___ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
Re: [Vyatta-users] Cluster heartbeat / change to ucast?
Yes, you can edit the configuration directly; however, you'll need to modify it again on reboot as it's created from the Vyatta configuration. Best, Justin On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > > > > > The heartbeat from my Vyatta cluster is creating errors on another cluster > on my network. I would like to change the default bcast heartbeat to ucast. > Does anyone know if it is save to edit the following file directly without > any adverse affects? > > > > File: > > /etc/ha.d/ha.cf > > > > Current config: > > keepalive 1 > > deadtime 4 > > warntime 2 > > initdead 120 > > logfacility daemon > > bcast eth0 eth1 > > auto_failback off > > node riv1 riv2 > > ping 192.168.5.3 192.168.0.221 > > respawn hacluster /usr/lib/heartbeat/ipfail > > > > I would like to replace the bcast line with: > > ucast eth0 192.168.5.5 > > ucast eth1 192.168.0.252 > > > > Anyone had luck with this type of config? > > > > Thanks, > > Chad > > > > > ___ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
[Vyatta-users] Cluster heartbeat / change to ucast?
The heartbeat from my Vyatta cluster is creating errors on another cluster on my network. I would like to change the default bcast heartbeat to ucast. Does anyone know if it is save to edit the following file directly without any adverse affects? File: /etc/ha.d/ha.cf Current config: keepalive 1 deadtime 4 warntime 2 initdead 120 logfacility daemon bcast eth0 eth1 auto_failback off node riv1 riv2 ping 192.168.5.3 192.168.0.221 respawn hacluster /usr/lib/heartbeat/ipfail I would like to replace the bcast line with: ucast eth0 192.168.5.5 ucast eth1 192.168.0.252 Anyone had luck with this type of config? Thanks, Chad ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users