/v01/set?wid=77bc74fefc479ada=22=51=5=3.9.2=78=0=251=181=22;
time=0630=0=XXX=20200504=0=37=10095=181=1=1=1&
temp03=60=0
In that post the following sensor based data was uploaded:
average wind direction
wind direction
high wind speed
wind speed
average wind speed
inside humidity
inside dewp
Yes I will post here when released.
Gary
On Tuesday, 5 May 2020 09:51:52 UTC+10, re...@eau.net wrote:
>
> Gary, Will you be posting an all-clear message when it has been done and
> works? We should wait until we hear from you, obviously, but don't know
> the protocol you use to say all is
I missed the “fileparse driver” and thought he was asking about writing a
driver. Sorry about that.
> On May 4, 2020, at 6:30 PM, Tom Keffer wrote:
>
>
> Hi, John,
>
> Yes, a driver can be made to do this. But, he's using the fileparse driver,
> which has no such capability. So, he can
Hi, John,
Yes, a driver can be made to do this. But, he's using the fileparse driver,
which has no such capability. So, he can either write a bespoke weewx
driver, or change his arduino code to emit what we call 'rain'. I just
think the latter is easier.
In the long run, the right way to do this
Hi Tom,
Apologies in advance if I have misunderstood the question and have made you
read what I believe you already know.
If the question is can a driver be written to make use of rain emitted every 15
seconds and resetting every hour, I believe such a driver can easily be written.
The
Yes, you did use the Debian package installer.
You should be able to just do
sudo apt-get update
sudo apt-get install weewx
If you're concerned about breaking things, make a backup of your database
file /var/lib/weewx/weewx.sdb. It's the only thing that's irreplaceable.
But, you've been doing
I am very cautious and don't want to goof things up (well, too much) so
today I make sure the RaspPi4 is running the latest Buster, and updated all
the Python 3 files and prerequisites that are listed.
In the Update Guide, there is a red-highlighted admonition that one must
use the same
Gary, Will you be posting an all-clear message when it has been done and
works? We should wait until we hear from you, obviously, but don't know
the protocol you use to say all is well.
Thanks. Dale
On Monday, May 4, 2020 at 5:29:51 PM UTC-5, gjr80 wrote:
>
> It’s mine, part of WeeWX-WD,
On Monday, May 4, 2020 at 4:31:15 PM UTC-5, Tom Keffer wrote:
>
> The current pyephem broke the extended almanac, and I've held back that
>> python 2.7 package.
>>
>
>
Sorry. I don't understand what you mean by "broke the extended almanac."
>
weewx 3.9.2 just ignored the updated Freshports
I have a WH25 that does temperature, humidity and pressure (raw) that I
bought from Misol via ali-express. It emits RF at 433.9MHz, perfect for
SDR. (Now I've forgotten how to add the sensor, which I will ask about
separately.)
Richard.
On Saturday, 28 December 2019 07:36:36 UTC+11, galfert
Hello Johnny,
Unfortunately, the data is summed up every few minutes and the values no
> longer fit.
> For example, I have 0.15mm of rain in the last hour, then the value after
> each loop adds up until the hour is over.
If I understand you correctly, your software emits the total rain measured
Ah great Gary! Thanks!
Den tisdag 5 maj 2020 kl. 00:29:51 UTC+2 skrev gjr80:
>
> It’s mine, part of WeeWX-WD, it’s been ported but needs to be packaged.
> Will be completed shortly.
>
> Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To
Ok then I´ll wait and hope that it will get ported, otherwise I'll have to
remove it.
Thanks tk!
Den tisdag 5 maj 2020 kl. 00:24:44 UTC+2 skrev Tom Keffer:
>
> Looks like the stackedwindrose generator has not been ported to Python 3.
> The function "unicode()" no longer exists in Python 3.
>
>
It’s mine, part of WeeWX-WD, it’s been ported but needs to be packaged. Will be
completed shortly.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Looks like the stackedwindrose generator has not been ported to Python 3.
The function "unicode()" no longer exists in Python 3.
On Mon, May 4, 2020 at 2:46 PM Mikael Fredriksson
wrote:
> Hi!
>
> Just updated weewx 3.9.1 to 4.0.0
> Everything seems to be good except the stackedwindrose
Glad to hear it. Enjoy.
On Mon, May 4, 2020, 5:37 PM David Schmidt
wrote:
> All right, removed all of python3 and with python2 all runs fine now,
> thanks for the help!
>
>
>
> On Monday, May 4, 2020 at 7:35:03 PM UTC+2, G Hammer wrote:
>>
>> If you are wanting python2 then run everything by
Hi!
Just updated weewx 3.9.1 to 4.0.0
Everything seems to be good except the stackedwindrose imagegenerator.
I get this message in the log:
May 4 23:21:49 raspberrypi weewx[12467] ERROR weewx.reportengine: Caught
unrecoverable exception in generator
Not sure if I have stuffed anything up, but I was able to follow just an
apt-get update and upgrade to get from 3.9.2 to 4.0.0, continuing to run
under python2.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and
All right, removed all of python3 and with python2 all runs fine now,
thanks for the help!
On Monday, May 4, 2020 at 7:35:03 PM UTC+2, G Hammer wrote:
>
> If you are wanting python2 then run everything by using it explicitly.
> There are examples in the setup.py guide
>
>
> On Mon, May 4,
>
> The current pyephem broke the extended almanac, and I've held back that
> python 2.7 package.
>
Sorry. I don't understand what you mean by "broke the extended almanac."
> I'm having an issue with the annual "High Wind" speed value. Although the
> direction and time are there, the speed is
Pat, I have WEEWX 4.0.0.1, Belchertown 1.1 with Python 3.7 running on
Fedora 31. If I enable "check_for_updates" I get a malloc error and
core.Is there some python package that particular option has a
dependency on ? Or is there actually a bug?
On Wednesday, April 8, 2020 at 1:26:33
Hello everybody!
I have a little problem. Sorry for my very bad english. I come from Germany
and my English is not the best. My experience with weewx is also very
limited. I built a weather station 3 years ago. It consists of an Arduino
Mega and several sensors.
Among other things, a rain
Hi all,
I'm glad that version 4.0 supports python 3.x, although it is currently
installed under python 2.7. The current pyephem broke the extended almanac,
and I've held back that python 2.7 package. However, I'm planning to
transition to python 3.8, with python 2.7 as fallback.
I'm having an
That fixed the problem Edited skin.conf and told it to copy those
things always. Format was correct at the next report run.
On Monday, May 4, 2020 at 2:16:45 PM UTC-5, Mike Doneske wrote:
>
> It is set to use the default of running at the archive interval if this is
> what you mean by
It is set to use the default of running at the archive interval if this is
what you mean by report timing. I'll try option 2 to see of that fixes the
report format.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group
OK. I think I see what's going on. It's a bug in the report engine.
You are using the report timing option, right?
The report engine copies the static files only the first time it runs.
However, the report timing option is kicking in that first time, preventing
the Seasons report from running.
latest log attached
On Monday, May 4, 2020 at 12:23:46 PM UTC-5, Tom Keffer wrote:
>
> Good. Looks like we've got the debug messages.
>
> Not so good is that I forgot to include the format specifiers. Try this
> version.
>
> We'll get there.
>
> -tk
>
> On Mon, May 4, 2020 at 10:13 AM Mike
If you are wanting python2 then run everything by using it explicitly.
There are examples in the setup.py guide
On Mon, May 4, 2020, 1:27 PM David Schmidt
wrote:
> Interesting, there might be a mess up there at this point!
>
> Thanks for pointing that out.
>
>
> On Mon, May 4, 2020, 19:21 G
Interesting, there might be a mess up there at this point!
Thanks for pointing that out.
On Mon, May 4, 2020, 19:21 G Hammer wrote:
> All your posted errors say python3
>
> May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
>
>
>
> On Monday, May 4, 2020 at 1:02:11 PM UTC-4, David
Good. Looks like we've got the debug messages.
Not so good is that I forgot to include the format specifiers. Try this
version.
We'll get there.
-tk
On Mon, May 4, 2020 at 10:13 AM Mike Doneske wrote:
> New log
>
> On Monday, May 4, 2020 at 11:21:23 AM UTC-5, Tom Keffer wrote:
>>
>> It
All your posted errors say python3
May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL
On Monday, May 4, 2020 at 1:02:11 PM UTC-4, David Schmidt wrote:
>
> Hi there,
>
> I followed the instructions from weewx. Installed all 2.7 python.
> Weird isn't it?
>
> Any further idea to
New log
On Monday, May 4, 2020 at 11:21:23 AM UTC-5, Tom Keffer wrote:
>
> It looks like Centos must be suppressing debug messages. Go into
> /etc/rsyslog.conf. You'll find something that looks like this:
>
> *.info; /var/log/messages
>
> Change it to
>
> *.debug; /var/log/messages
>
>
Hi there,
I followed the instructions from weewx. Installed all 2.7 python.
Weird isn't it?
Any further idea to debug?
On Mon, May 4, 2020, 16:03 G Hammer wrote:
> Perhaps you installed the python2 version instead of the python3 version.
>
> On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David
Bill, if you don’t get the option to accept the update, try using apt instead
of apt-get.
> On May 4, 2020, at 7:17 AM, Tom Keffer wrote:
>
>
> Bill, I'm not the package expert --- Matthew is --- but we now maintain two
> Debian repositories: one for buster (python 3), and one for squeeze
It looks like Centos must be suppressing debug messages. Go into
/etc/rsyslog.conf. You'll find something that looks like this:
*.info; /var/log/messages
Change it to
*.debug; /var/log/messages
You may have to reboot to have it take affect. Or, at least, restart
rsyslog:
*sudo systemctl
Thank you,
That's sorted it :-) Everything now working as expected.
Is there a way of closing the thread or do I just leave it hanging?
Cheers,
Ian
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop
I'm having trouble using weewx-interceptor, with WS-5000 (same as a WS-2000
with the ultrasonic anemometer). I would like to keep WU and Ambient
connections operating, and I want to catch the additional temperature
sensors so I've been trying to sniff the ambient connection on the router.
Bill, I'm not the package expert --- Matthew is --- but we now maintain two
Debian repositories: one for buster (python 3), and one for squeeze (python
2).
The change you're seeing reflects the need to reflect that specificity.
You can safely agree to accept updates from python2 squeeze.
-tk
One question: How is WEEWX_BINDIR passed to the daemon? I see where it is
set but not passed to the daemon in the startup script. Is it passed as
part of the start up environment? How is weewx daemon finding those modules
in /usr/share/weewx/weewx? If debug is set to "1", it might be useful to
Perhaps you installed the python2 version instead of the python3 version.
On Monday, May 4, 2020 at 7:57:57 AM UTC-4, David Schmidt wrote:
>
> Hi there,
> I installed paho-mqtt et all as per this guide:
> https://github.com/weewx/weewx/wiki/mqtt
> Now when I start the service I get this:
>
> May
Sorry it would help if I attached
this https://github.com/chaunceygardiner/weewx-forecast
On Monday, May 4, 2020 at 12:37:59 PM UTC+1, Ian Flipp wrote:
>
> Hello everyone,
>
> This is my first post on any forums so if I mess please advise accordingly.
>
> I've been running weewx for many years
debug = 1 is set. It is always set to 1
On Monday, May 4, 2020 at 7:14:18 AM UTC-5, Tom Keffer wrote:
>
> Looks like debug is not on. Double check weewx.conf, and make sure you've
> set
>
> debug = 1
>
> -tk
>
> On Sun, May 3, 2020 at 8:00 PM Mike Doneske > wrote:
>
>> Attached is log after
This should help although I seem to remember somebody saying an upgrade to
weewx-forcast-3.3.2.tar.gz would be released when weewx V4 was released
Phil
On Monday, May 4, 2020 at 12:37:59 PM UTC+1, Ian Flipp wrote:
>
> Hello everyone,
>
> This is my first post on any forums so if I mess please
Ok I've installed again cheetah3 and the error was solved.
Thanks
Andrea
Il giorno lunedì 4 maggio 2020 15:09:09 UTC+2, Andrea ha scritto:
>
> I've got this error running vers.4. I use Mint 19.3 and when I did the
> installation of python3.cheetah I received error because "python3-cheetah"
>
I had this problem with the NWS forecast. Search this forum for
"addRecord() got an unexpected keyword argument 'log_level'" and you'll
find a response that helped me fix it.
On Mon, May 4, 2020 at 4:38 AM Ian Flipp wrote:
> Hello everyone,
>
> This is my first post on any forums so if I mess
I've got this error running vers.4. I use Mint 19.3 and when I did the
installation of python3.cheetah I received error because "python3-cheetah"
not found, so I've installed python3-cheetah with pip. Could be this the
problem?
ERROR weewx.reportengine: Unable to instantiate generator
Hello everyone,
I've updated my weewx installation and had a niculskin installed as a
standard template.
Unfortunately this function doesn't work: search_list_extensions =
user.historygenerator.MyXSearch in skin.conf
*I got this error:*
*May 4 15:00:30 raspi-wetter weewx[4997] ERROR
You don't need to do anything. If you have a working installation, it will
continue to work.
What you may be referring to is the new default database schema. But, it
comes into play only if you create a new database. Old databases continue
to use their old schema.
-tk
On Mon, May 4, 2020 at
On 04/05/2020, Wt Riker wrote:
[...]
>> Have you setup and used owserver before?
>>
> No.
Okay, so no working config. Starting from scratch
>> Do you have a working /etc/owfs.conf or are you using the supplied
>> default?
> I modified the system default. It is attached.
There are a few things
this (ujson instead of python-cjson, then install mqtt extension) seems to have
worked up to point that weewx.log reports its mqtt client is successfully
publishing loop data
sudo python3.7 -m pip install ujson
> On 4 May 2020, at 8:58 pm, Graham Eddy wrote:
>
> i have only just become
Looks like debug is not on. Double check weewx.conf, and make sure you've
set
debug = 1
-tk
On Sun, May 3, 2020 at 8:00 PM Mike Doneske wrote:
> Attached is log after installing new reportengine.py in
> /usr/shr/weewx/weewx. Was expecting more log output than what I received. I
> included a
Hi there,
I installed paho-mqtt et all as per this guide:
https://github.com/weewx/weewx/wiki/mqtt
Now when I start the service I get this:
May 04 13:53:28 raspberrypi python3[984]: weewx[984] CRITICAL __main__:
Caught unrecoverable exception:
May 04 13:53:28
Hello everyone,
This is my first post on any forums so if I mess please advise accordingly.
I've been running weewx for many years using the WMR100 driver, the actual
station is an oregan scientific from Maplins. I've always run weewx on a
RPi, now running on RPi 4. Everything has been fine
Thanks for the reply, It appears that this will continue to be mysterious.
See embedded comments.
On Sunday, May 3, 2020 at 6:30:10 PM UTC-4, Glenn McKechnie wrote:
>
> This has come up a few times and the solution remains ... vague and
> mysterious.
> It's possibly a systemd issue, but we'll
i have only just become interested in mqtt (to make my custom weewx gauges near
realtime).
the link to the MQTT weewx extension mentioned below lists two prerequisites:
paho-mqtt, python-cjson.
paho-mqtt installed fine.
python-cjson fails.
i haven't found anything in the forum relating to this
Just wondered what the preferred method was if you bring old data
(weewx.sdb) into a new installation with V4
I believe the new weewx.sdb has new fields so Im assuming wee_import is to
be used instead of just coping and replacing.
Thanks for some great software and all the time many of you put
:00 BST (1588573800) to daily summary in 'weewx.sdb'
May 4 07:30:20 raspberrypi weewx[11308]: restx: WeatherCloud: url:
http://api.weathercloud.net/v01/set?wid=77bc74fefc479ada=22=51=5=3.9.2=78=0=251=181=22=0630=0=XXX=20200504=0=37=10095=181=1=1=1=60=0
May 4 07:30:20 raspberrypi weewx[11308
57 matches
Mail list logo
