Re: [weewx-user] NWS Radar Changes

Thanks. I now have the aviation weather radar displaying. On Tuesday, January 12, 2021 at 5:30:23 AM UTC-8 mjenk...@gmail.com wrote: > If you go up a level, the ones not in the folders are the current ones. > > https://www.aviationweather.gov/data/obs/radar/rad_rala_lws.gif > > > On Monday,

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

> On 12 Jan 2021, at 12:12, Nate Bargmann wrote: > > * On 2021 12 Jan 13:40 -0600, galfert wrote: >> Stop saying that the airport is at the same elevation or at different >> elevation from you. That is extraneous and irrelevant information. > > I am merely attempting to be factual as I'll

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Excellent, glad things are looking better. Good luck. On Tuesday, January 12, 2021 at 7:15:37 PM UTC-5 brent...@gmail.com wrote: > This Loop2 packet disc has, I believed solved my issue. I was using the > loop1 packet, even though my console and it's firmware version does support > it. > > I

Re: [weewx-user] Re: Field mapping - Is there a list/description?

Things to think about: Makes sense that the lack of a clock would imply something else. But, what is it? Take a measured amount of water and pour it into the rain bucket. What do you see in the captured data? Perhaps you have a unit conversion problem? The packet can use US, METRIC, or METRICWX

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Okay thank you for the correction on LOOP2 and what it includes. But do see now from the link referenced that LOOP2 is missing some optional sensors that some users may have. Seems like WLL is still a better way to go. But I realize that is not the subject matter of this thread. On

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

This Loop2 packet disc has, I believed solved my issue. I was using the loop1 packet, even though my console and it's firmware version does support it. I had been using a VERY old version of weewx up until a couple of months ago when I upgraded and put it on a raspberry pi. So far so good,

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Just to clarify, the LOOP2 packet actually includes all three pressures. So if using loop_request = 2 you will get all three pressures from the console in both loop packets and archive records. Nothing will be calculated. The combined hardware/software archive record issue occurs when using

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Not at all. If you blindly set loop_request = 3 then yes your archive record pressure values (as well as some other obs) may end up being a combined hardware/software value. If you read the loop_request stanza it warns you of this and points out the solution. Gary On Wednesday, 13 January

Re: [weewx-user] Re: Field mapping - Is there a list/description?

I don't think its based on daily rain. Why? Because it's a very simple station and i'm pretty sure it doesn't have internal clock. I don't have any way to set the clock in stationso how would it calculate midnight?! This is my 'station': Spare part for weather station (Transmitter / thermo

Re: [weewx-user] Re: Field mapping - Is there a list/description?

There is no master list of all the database variables. However, there are some comments about rain in the section *Porting to new hardware* of the Customizing Guide. In particular, the field 'rain' should be the amount of rain that fell *during

[weewx-user] Re: Field mapping - Is there a list/description?

changed rain_mm from 'rain' to 'rainRate' and it's betterit's showing 1.2mm/h when my station is reporting 0.6still twice the value. I also added 'mm_per_hour' in my driver config for rain, but still twice. I'm not sure what's wrong. Em terça-feira, 12 de janeiro de 2021 às 19:11:10

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

It is probably not much of an issue for you at 364 ft of elevation. But stations at greater elevation like the OP at 4400 ft, that do not receive station pressure data from the console will have a more difficult time properly calculating Altimeter pressure since their consoles only provide sea

[weewx-user] Re: Field mapping - Is there a list/description?

Also, a second question: My station is reporting "0.6" in "rain_mm" field. It's a very light rain now. I'm not sure if this is for the last hour or last 15 minutes. The thing is that database is clean and in report generate, this is what i'm getting for rain: Rain Rate 88.8 mm/h Rain Today

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Thanks for the summary (it helps), but I'm missing what actual problem this thread is trying to solve. I've had my VP2 since jan'2009 and have ancient firmware on it. I've run weewx for many years with the Vantage driver, doing nothing special to tweak what it generates nor how. I've fed

[weewx-user] Re: Get data from MQTT into weewx is possible?

FWIW - this is yet another thing that is in the weewx wiki.Definitely research there when you want to see if somebody has blazed a trail before - https://github.com/weewx/weewx/wiki On Tuesday, January 12, 2021 at 1:45:53 PM UTC-8 jmc...@gmail.com wrote: > Tks, it worked! > > > Em

Re: [weewx-user] Re: New to weewx, AW WS-2000

Until you get your WS View app (ie, your gateway) seeing the sensors, weewx isn't going to be able to display anything from those sensors.Once you 'do' get them working, weewx will just pick them up right away. Cool feature of the driver. You might want to consult the Ecowitt forums as

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

For anyone confused or not able to follow alonghere is the premise of what Gary and I are discussing. Davis LOOP1 data in terms of barometric pressure only sends corrected sea level pressure. Davis LOOP2 data in terms of barometric pressure only sends station pressure (atmospheric

[weewx-user] Field mapping - Is there a list/description?

Is there any list of fields and what it means in docs? I have some fields in my station but I'm not sure which field should be mapped to which field in DB. rain_mm => Currently mapped to 'rain' temperature_C => outTemp humidity => outHumidity wind_avg_km_h => not mapped, I'm not sure which is

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Well then this seems to be a big limitation for any Davis station that is not using a WLL! Seems like the WLL is a better solution than other loggers and then ending up with a mess of combined calculated and received values for barometric pressure. Unless it is possible to set things so that

[weewx-user] Re: Get data from MQTT into weewx is possible?

Tks, it worked! Em terça-feira, 12 de janeiro de 2021 às 16:31:13 UTC-3, kk44...@gmail.com escreveu: > You may want to try this one: > > https://github.com/bellrichm/WeeWX-MQTTSubscribe > > jmc...@gmail.com schrieb am Dienstag, 12. Januar 2021 um 17:44:24 UTC+1: > >> Hi >> >> Is possible to

Re: [weewx-user] Re: New to weewx, AW WS-2000

Thanks for all the info! - Good to know that the WH32B is not supported by the GW1000...makes sense. - I will try moving things around to check RF performance. - My GW1000 is 915 MHz. I checked the WS-2000 console and it is also 915 MHz. - I'm planning to order a short USB extension cable to

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

I have no WLL experience so short answer is I don’t know. But the loop_request setting is a vantage driver setting, as far as I know you need to use a different driver for WLL. Also, there are a number of WLL drivers; looking at one just now I see it appears to emit pressure and altimeter,

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Gary, That is very interesting and possibly important information. Is what you mention dependent on the type of logger used? Meaning is the data switching (LOOP1 / LOOP2) still an issue with the WLL? On Tuesday, January 12, 2021 at 4:14:00 PM UTC-5 gjr80 wrote: > Assuming can be a dangerous

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Assuming can be a dangerous business! If you have not specified anything for loop_request then you will be using LOOP1 only (the default), whether that is the ‘best available format’ depends on your circumstances I guess. Should you happen to specify loop_request = 3 in order to get the best of

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

If you want better calibration precision than the 0.01 inHg you are getting now then switch to hPa (which are the same as millibar). When you calibrate using hPa you can be more precise. But you don't have to permanently switch to seeing hPa, rather this is just an exercise during calibration

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

* On 2021 12 Jan 13:40 -0600, galfert wrote: > Stop saying that the airport is at the same elevation or at different > elevation from you. That is extraneous and irrelevant information. I am merely attempting to be factual as I'll admit to being still a bit confused as to what unit the METAR

Re: [weewx-user] Question on Weewx, Vantage Vue, and CWOP

Stop saying that the airport is at the same elevation or at different elevation from you. That is extraneous and irrelevant information. Use this sight to find out your elevation: https://www.freemaptools.com/elevation-finder.htm If you don't have the latest firmware then you may not have Loop2

[weewx-user] Re: Windy Map in Belchertown Skin

Oh, tank you. I will try this. Paul Eaton schrieb am Montag, 11. Januar 2021 um 20:48:20 UTC+1: > Hi kk44 try this > > By accident I found I could get the Windy weather forecast on the Windy > radar map by adding my station position marker. This is one of the options > listed in the General

[weewx-user] Re: Get data from MQTT into weewx is possible?

You may want to try this one: https://github.com/bellrichm/WeeWX-MQTTSubscribe jmc...@gmail.com schrieb am Dienstag, 12. Januar 2021 um 17:44:24 UTC+1: > Hi > > Is possible to inject data into Weewx from MQTT? > I know that there is one 'plugin' to send weewx data to MQTTbut I need > to do

[weewx-user] Re: error 401 with import WU

Hi, Can you please post the exact output you are seeing when wee_import fails. Also what version of WeeWX are you running? Gary On Wednesday, 13 January 2021 at 03:52:44 UTC+10 f4...@f4gqk.fr wrote: > Hello, > > I am going to the following command: > > > > * wee_import

Re: [weewx-user] Re: New to weewx, AW WS-2000

I have a GW1000, the outside WH32, a couple inside WH31, and a WH51 soil sensor, and had no problems with setup on mine. The new WH31 sensors have the dip switch settings (nicely) on the back of the unit, and they also display which channel they're on via the little screen on the sensor

Re: [weewx-user] Re: New to weewx, AW WS-2000

A few more thing - some might sound sort of a bit stupid, but ... are the sensors you are missing activated in the WSView app ? The best way to test is a) look into the WSView app (Device list --> GW1000 --> More --> SensorIDs) the sensor should be active and a (hexadecimal) sensor ID should be

[weewx-user] error 401 with import WU

Hello, I am going to the following command: * wee_import --config=/etc/weewx/weewx.conf --import-config=/var/tmp/wu.conf * and I have a 401 error. *HTTP Error 401, Unauthorized* My station ID is OK on wunderground and my password is OK too. Does anyone have the same problem? Thank you

Re: [weewx-user] Re: New to weewx, AW WS-2000

The only sensor that will not work with the GW1000 is the WH32Band there is no need for it. Because the GW1000 already has this sensor built in. If you are having problems picking up the WH31, then that would be a distance/interference issue. But compared to the WS-2000 the GW1000 is

[weewx-user] Get data from MQTT into weewx is possible?

Hi Is possible to inject data into Weewx from MQTT? I know that there is one 'plugin' to send weewx data to MQTTbut I need to do inverse way. I have one MQTT server and another system that is collecting data and publishing in this MQTT server. What I want is to get these data from MQTT

Re: [weewx-user] Re: Reports suddenly stopped working

You'll have to ask the author of the driver, but it looks like it is trying to download historical archive data, going all the way back into September. Because those data are already in the database, you get the UNIQUE constraint error. The errors are harmless, but it may take some time for the

[weewx-user] Re: Reports suddenly stopped working

I've noticed in the syslog that it is going round in loops trying to insert the same records from September, over and over again. What's caused this? I've changed nothing, it suddenly stopped updating the reports?! Jan 12 14:51:53 weatherpi weewx[15949] ERROR weewx.manager: Unable to add

[weewx-user] Netatmo station - help needed for read some observation

I have Netamo station indoor modul and outdoor module with Wind Anemometer and Rain Gauge. I installed it with the Netatmo extension from Matthewwall via an forked updated extension from Bricebou. I also use Belchertown skin and public site via MQTT broker and so far all works and the loop

Re: [weewx-user] NWS Radar Changes

If you go up a level, the ones not in the folders are the current ones. https://www.aviationweather.gov/data/obs/radar/rad_rala_lws.gif On Monday, January 11, 2021 at 10:07:55 PM UTC-6 ral...@gmail.com wrote: > Anybody able to make the new and improved NWS radar work? Has anyone > written

[weewx-user] Re: weewx Treiber and SDR driver simultan ?

You can only use one driver. The WS3080 works with SDR driver. Andy On Monday, January 11, 2021 at 10:09:02 AM UTC-8 Frank wrote: > Hi there I'm currently working with rtl_433 ... Can my WS3080 weather > station run via fousb and at the same time my USB STICK rtl_433 on a Weewx > After >

Re: [weewx-user] NWS Radar Changes

I ended up embedding an iframe (windy) in the radar.inc file and commenting out the lines that were no longer needed. This has worked great. On Monday, January 11, 2021 at 11:07:55 PM UTC-5 ral...@gmail.com wrote: > Anybody able to make the new and improved NWS radar work? Has anyone >

[weewx-user] Re: Set heatindex to use old NWS algorithm in 4.0.3

Yes - my bad. I meant 4.3.0 Thanks for the link - I'm not sure why I didn't spot that as it is quite obvious. Thanks for pointing it out On Tuesday, 12 January 2021 at 10:02:03 UTC gjr80 wrote: > Hi, > > I presume you meant 4.3.0 since there is no 4.0.3. As per the User Guide >

[weewx-user] Re: Set heatindex to use old NWS algorithm in 4.0.3

Hi, I presume you meant 4.3.0 since there is no 4.0.3. As per the User Guide have you tried: [StdWXCalculate] [[WXXTypes]] [[[heatindex]]] algorithm = old Gary On Tuesday, 12 January 2021 at 19:29:24

[weewx-user] Set heatindex to use old NWS algorithm in 4.0.3

I have updated to v4.0.3 (setup.py method) and I want to calculate heat index using the "old" NWS algorithm. In my weewx.conf I have added: [StdWXCalculate] [[Algorithms]] heatindex = old but this doesn't seem to have any effect. From looking at wxformulas.py I had assume that