I knew it had to be something simple. Thanks again!
On Monday, April 25, 2022 at 10:59:36 AM UTC-5 tke...@gmail.com wrote:
> You can try forcing rainRate to be calculated in software. In weewx.conf:
>
> [StdWXCalculate]
> ...
> [[Calculations]]
> ...
> rainRate = software
>
>
>
> On
You can try forcing rainRate to be calculated in software. In weewx.conf:
[StdWXCalculate]
...
[[Calculations]]
...
rainRate = software
On Mon, Apr 25, 2022 at 8:22 AM Seth Ratner wrote:
> Hey everyone.
>
> My setup:
>
> GW1000 driver for Ecowitt WS80. I have a Rainwise wired
Hey everyone.
My setup:
GW1000 driver for Ecowitt WS80. I have a Rainwise wired rain gauge using a
self-made service that adds the rain bucket tips to the loop. All the rain
reports correctly, but the rainRate is always zero in the archive.
My hunch is that the WS80/GW1000 is reporting a
The following may be useful for someone who wants to do this on fedora
attached is a "goodie bag" full of stuff for setting up a multiple weather
station system on *fedora*. It uses systemd services and timers. It is
based on the three- weewx.conf file setup; two for archiving data from
Tom
Many thanks for getting back to me with the suggestion. I've just done a
full system upgrade (again), and it worked first time. I've no idea what
happened. To the best of my knowledge I've done nothing different to the
other occasions I tried to upgrade, however, the SD card used this
@Rainer,
ich habe die Doku V1.6.5 (2022.04.19) auch von Ecowitt bekommen.
Wobei diese Aussage wiederum nicht ganz stimmt:
"#define ITEM_Piezo_Hourly_Rain 0x82//
2 reserved, not used"
Mein GW2000 liefert hier sporadisch Werte, die auch
For some reason, your configuration file is not getting set up for the
specific weather station and driver you are using.
Perhaps you can give us some details about what you mean by, "repopulated
the new .conf file with the correct data"? Did you do this by hand?
If it happens again, you can try
Good Morning.
My system runs on a Mk4 RPI using Debian Buster.
I'll start by saying that I'm not confident using Linux at all, but I try
my best.
I upgraded my system to 4.5.1 a month after it came out and I had a similar
issue to this one so rolled back using a back up. Tried again a couple
The old schema was "schema=user.radiationhours.schema_with_sunshine_hours".
If I load my old weewx.sdb and then configure it with "wee_database
weewx.conf --reconfigure" then this deletes the "sunshine_hours" column.
All other data will be accepted. I'll try your instructions to see if it
Hallo Werner
Die API Doku enthält z.Zt. noch Fehler. In Kürze sollte eine korrigierte
Version erscheinen.
nachstehend die gültige und korrekte Fassung des CMD_READ_RAIN Befehls
und der "WiFi" (besser API) Rückmeldung
CMD_READ_RAIN 0x57 und die dazugehörige WiFi response (es gibt darin
keinen
10 matches
Mail list logo