[weewx-user] Re: NOOB Questions on "Installation using setup.py" on Raspberry Pi

OK - I think I got connected and allowed part of the log to be captured. Time to do more reading... I read in the Logia manual that when plugged into a USB port, the console pulls some power via USB. So I wanted to check for undervoltage with dmesg and noticed this when plugging in the

Re: [weewx-user] Problem with weewx-airlink

You’re getting this because the timestamp is bad: 'ts': 85460 The specific message: user.airlink: last_report_time must be time since boot: 85441 seconds. is worded that way because I found airlink was reporting time since reboot (rather than time since epoch). I observed this behavior until

Re: [weewx-user] Problem with weewx-airlink

My guess since you do not see the device in weatherlink.com is that it is not reporting correctly on the network. 1. First see if you can open your web browser to the api of the airlink device. for example: http://xxx.xxx.xxx.xxx/v1/current_conditions You should see JSON data returned. 2.

[weewx-user] Problem with weewx-airlink

Hi guys, I just installed for the first time a Davis Airlink and I want to integrate it in WeeWX with which my Davis VP2 already works. I followed the instructions on the weewx-airlink page , but for some reason it is not working . Here is

[weewx-user] Re: NOOB Questions on "Installation using setup.py" on Raspberry Pi

@Bob Atchley - Thanks! Not confusing (to me) at all! ;-) Very helpful- particularly the Wiki links. My usage of GitHub has been very limited from what I now see for WeeWX, so I'll have to do some exploring. I've used Wikis often but was unaware GitHub has such a rich capability. Thanks

Re: [weewx-user] Davis Data Logger - Issue

A powered hub makes it just as bad, and possibly worse, Tom. But, with your "more forgiving" Vantage driver, it is far better than before. So I am quite willing to live with it as it is. As mentioned in the same thread, I removed my cron job that calls a program, and I'm using the tags you

Re: [weewx-user] vp2 - how to disable ch2?

i can power down, pull it apart, put the batteries in backwards. how do i reset it? (and why would wee_device be failing to reconfigure ch2 but work successfully otherwise?) > On 25 May 2022, at 8:13 pm, gjr80 wrote: > > Doesn't leave many options. Can't power down/reset the envoy? > > Gary

Re: [weewx-user] vp2 - how to disable ch2?

Doesn't leave many options. Can't power down/reset the envoy? Gary On Wednesday, 25 May 2022 at 19:53:32 UTC+10 Graham Eddy wrote: > data logger is in an envoy > > On 25 May 2022, at 7:25 pm, gjr80 wrote: > > Can't you set transmitter IDs manually via the console? > > Gary > > On Wednesday, 25

Re: [weewx-user] vp2 - how to disable ch2?

data logger is in an envoy > On 25 May 2022, at 7:25 pm, gjr80 wrote: > > Can't you set transmitter IDs manually via the console? > > Gary > > On Wednesday, 25 May 2022 at 18:18:36 UTC+10 Graham Eddy wrote: > QC is filtering out the bad values, but weewx server is currently resetting > after

Re: [weewx-user] vp2 - how to disable ch2?

Can't you set transmitter IDs manually via the console? Gary On Wednesday, 25 May 2022 at 18:18:36 UTC+10 Graham Eddy wrote: > QC is filtering out the bad values, but weewx server is currently > resetting after 4 failed retries on regular basis while the phantom station > haunts the vp2.

Re: [weewx-user] vp2 - how to disable ch2?

An alternative might be to use a different driver - does rtl_433 pick up its transmissions? If so, using the SDR driver could work, and you wouldn't have weewx resetting after failed USB comms. On Wed, 25 May 2022 at 18:18, Graham Eddy wrote: > QC is filtering out the bad values, but weewx

Re: [weewx-user] vp2 - how to disable ch2?

QC is filtering out the bad values, but weewx server is currently resetting after 4 failed retries on regular basis while the phantom station haunts the vp2. there is no radio signal being transmitted to provide the extraTemp1 values, it is just a figment of data logger’s imagination. the

Re: [weewx-user] vp2 - how to disable ch2?

Given such a whacko figure, perhaps under the [[Corrections]] section under [StdCalibrate], or more suitably, something under [StdQC]. On Wed, 25 May 2022 at 17:45, Graham Eddy wrote: > my old vantage pro2’s additional wireless temp station at ch2 (iss is at > ch1) has carked it (crushed in

Re: [weewx-user] Logging

On 24/05/2022 09:58, gjr80 wrote: You have nothing to apologise over, you did exactly the right thing. Was just pointing out that the operation of log_success is independent of the logging system being used and in the case of a driver or service such as you are using using log.debug() is more

[weewx-user] vp2 - how to disable ch2?

my old vantage pro2’s additional wireless temp station at ch2 (iss is at ch1) has carked it (crushed in tree fall). it exists no more; it is not transmitting. my vp2 data logger is faithfully reporting a phantom value of about 150 C (not bad for a river!) every few seconds, how do i disable