Re: [weewx-user] weewx v5.0.1 upgrade problem

@Matthew: That makes sense yep. Thanks a lot for detailed explanation. I cannot change port 80 on my hardware so I will review other options :) st 7. 2. 2024 v 8:08 odesílatel matthew wall napsal: > another option is to put a proxy in front of interceptor. configure > interceptor to listen on

Re: [weewx-user] weewx v5.0.1 upgrade problem

another option is to put a proxy in front of interceptor. configure interceptor to listen on a high port, say 8080, then run nginx binding to port 80 as a reverse proxy to interceptor, proxying all traffic or just specific requests. m -- You received this message because you are subscribed

Re: [weewx-user] weewx v5.0.1 upgrade problem

Frantisek, udev rules are for devices - USB or serial, not for network ports. the permissions error you are experiencing is probably due the fact that you are trying to listen on (bind to) port 80. only root is allowed to bind to ports lower than 1024. assuming that you are on a linux

Re: [weewx-user] weewx v5.0.1 upgrade problem

@Matthew: Any clue what should be modified (udev rules/group membership) for interceptor driver? When I modify systemctl service to not run under weewx:weewx everything is OK :) *Feb 6 19:37:43 rocky-weather-machine weewxd[1612889]: INFO weewx.engine: Loading station type Interceptor

[weewx-user] Re: updated to 5.0.1 still no joy

Can't help with such minimal log data and no info from your weewx.conf file driver section for the driver you're using. What os+version are you running ? What is the weewx pi's address ? What is an 'ip adaptor' ? What is its address ? Can you ping it from the weewx pi ? If you stop/start

[weewx-user] updated to 5.0.1 still no joy

I've been following the 5.0 issues. I have updated to 5.0.1 and done the usermod but I'm still having issues. RaspberryPi 3 B+ My Vantage Pro is connected via ethernet using the IP adaptor. I appreciate all the work that's gone into this free product. vp2pi@rpivp2:~ $ sudo apt update

Re: [weewx-user] Re: No updates to /var/www/html/weewx

I'm very surprised. You didn't change anything? On Tue, Feb 6, 2024 at 4:59 PM Philip Wolff wrote: > I did a cold restart and everything came up OK. Magic, I guess. Thanks for > your help! > > On Tue, Feb 6, 2024 at 4:18 PM gjr80 wrote: > >> I can't see anything obviously wrong. WeeWX is

[weewx-user] Re: V5.0.1 and rsyslog

I went through and completely removed all the weewx leftovers from /etc/init.d, /etc/systemd etc. and restarted rsyslog. I now have *four* logs - both of the "correct" weewx-vp2 and weewx-tempest, plus weewxd.log and weewxd.py.log... weewxd-vp2.log and weexd-tempest.log appear to be the normal

Re: [weewx-user] Re: No updates to /var/www/html/weewx

Typo. The version is 5.*0*.1-3. On Tue, Feb 6, 2024 at 5:03 PM Philip Wolff wrote: > I used Synaptic for the upgrade, so I don't have the commands that were > used. The version shown in Synaptic is 5.o.1-3. > > On Tue, Feb 6, 2024 at 4:19 PM Tom Keffer wrote: > >> Yes, it's true that there is

Re: [weewx-user] Re: No updates to /var/www/html/weewx

I used Synaptic for the upgrade, so I don't have the commands that were used. The version shown in Synaptic is 5.o.1-3. On Tue, Feb 6, 2024 at 4:19 PM Tom Keffer wrote: > Yes, it's true that there is a copy of the v5.0 skins in > /usr/share/weewx/weewx_data/skins. This is what Python calls

Re: [weewx-user] Re: No updates to /var/www/html/weewx

I did a cold restart and everything came up OK. Magic, I guess. Thanks for your help! On Tue, Feb 6, 2024 at 4:18 PM gjr80 wrote: > I can't see anything obviously wrong. WeeWX is looking in the right place > and the .conf files exist. read only permission is fine. Let me see if I > can

Re: [weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

No, you're not hallucinating! That detail was changed between v5.0.0 and v5.0.1. We should have called that out. On Tue, Feb 6, 2024 at 3:11 PM Mark Conner wrote: > I see now that I misread the upgrade page, and indeed it was advertised - > my apologies for saying it wasn't. When I was reading

Re: [weewx-user] Re: No updates to /var/www/html/weewx

Yes, it's true that there is a copy of the v5.0 skins in /usr/share/weewx/weewx_data/skins. This is what Python calls "package data ." It is used by "weectl station create" to create a new station data area. weectl copies it over from

[weewx-user] Re: No updates to /var/www/html/weewx

I can't see anything obviously wrong. WeeWX is looking in the right place and the .conf files exist. read only permission is fine. Let me see if I can replicate this, what Ubuntu version? Gary On Wednesday 7 February 2024 at 09:05:49 UTC+10 philip...@gmail.com wrote: > The Ubuntu package for

Re: [weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

I see now that I misread the upgrade page, and indeed it was advertised - my apologies for saying it wasn't. When I was reading the docs prior to the 5.0 upgrade, I thought it said that it would honor previous installs running as root and so I didn't worry about it for 5.0. But it really says it

[weewx-user] Re: No updates to /var/www/html/weewx

The Ubuntu package for weewx 5.0.1-3 installs a ton of stuff, including the skins data, in /usr/share/weewx. /etc/weewx/skins contains three empty folders: font, lang, and NOAA. I copied /usr/shared/weewx/weewx_data/skins to /etc/weewx/skins and veriified that Seasons/skin.conf is there. I

Re: [weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

See the Upgrade Guide section *WeeWX runs as the weewx user *. On Tue, Feb 6, 2024 at 12:05 PM Mark Conner wrote: > By chance, I just read the previous message thread and was able to use > that to fix my issue. The issue for

[weewx-user] Re: No updates to /var/www/html/weewx

So WeeWX cannot find the Seasons skin.conf, what is the contends of /etc/weewx/skins/Seasons? Also, you seem to be truncating some of the log lines, it would help if we could see the rest of the line: Feb 06 13:25:15 inspiron weewxd[692]: DEBUG weewx.reportengine: Cannot read skin

[weewx-user] Re: No updates to /var/www/html/weewx

It thinks that the skins are still in /etc/weewx instead of /usr/share/weewx. -- Boot bc88a89987b645f18a3473d5771ebb26 -- Feb 06 13:22:59 inspiron systemd[1]: Started WeeWX. Feb 06 13:23:00 inspiron weewxd[692]: INFO __main__: Initializing weewxd version 5.0.1 Feb 06 13:23:00 inspiron

[weewx-user] Re: New User: First Problem

This is unlikely to be a units problem, rather it is likely to be one of incorrect (or a lack of) data from the station. FineOffset stations provide the WeeWX field pressure and WeeWX will then calculate fields barometer and altimeter if possible. The log entry provided indicates that WeeWX has

[weewx-user] Re: New User: First Problem

I'll take a wild guess..maybe it's a unit mismatch of some sort. Try switching your console to inHg instead of hPa (temporarily) and see if that works. On Tuesday, February 6, 2024 at 7:05:58 AM UTC-5 michael.k...@gmx.at wrote: > The warning tells you: WeeWX is receiving 0.0 for "pressure".

Re: [weewx-user] weewx v5.0.1 upgrade problem

Impossible to say what the issue is with such a short log extract. Please edit weewx.conf, set debug =1, save weewx.conf and restart WeeWX. Let WeeWX run for at least two archive intervals and then take a log extract showing the full WeeWX startup through until the two archive intervals have

[weewx-user] Re: No updates to /var/www/html/weewx

Impossible to say what the issue is with such a short log extract. Please edit weewx.conf, set debug =1, save weewx.conf and restart WeeWX. Let WeeWX run for at least two archive intervals and then take a log extract showing the full WeeWX startup through until the two archive intervals have

Re: [weewx-user] weewx v5.0.1 upgrade problem

Yes, and data is being sent to CWOP and Wunderground. On Tue, Feb 6, 2024, 12:26 Jeff A. D. wrote: > Is your database being updated? > > On Tuesday, February 6, 2024 at 12:23:35 PM UTC-7 Philip Wolff wrote: > >> Thanks for that tip - it got me off the ground. All is now well except >> that

[weewx-user] No updates to /var/www/html/weewx

I'm configured for reports using the Seasons skin and data publishing to CWOP and Wunderground. After updating from 4.10.2 to 5.0.1, I'm seeing the following in the systemd journal every 5 minutes: Feb 06 12:10:17 inspiron weewxd[680]: INFO weewx.manager: Added record 2024-02-06 12:10:00 PST

[weewx-user] Re: V5.0.1 and rsyslog

please take a look at the wiki page "How to configure logging" https://github.com/weewx/weewx/wiki/logging the "weewxd.py.log" smells like a mixed up systemd configuration. be sure that you are using the units installed by weewx (in /usr/lib/systemd) and that there are not any units in

Re: [weewx-user] weewx v5.0.1 upgrade problem

Is your database being updated? On Tuesday, February 6, 2024 at 12:23:35 PM UTC-7 Philip Wolff wrote: > Thanks for that tip - it got me off the ground. All is now well except > that /var/www/html/weewx hasn't been updated since just before I did the > upgrade to 5.0.1. Anyone else seeing this?

[weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

WeeWX 4.* runs as root. WeeWX 5.* does not run as root. As you write the permissions of /dev/ttyAMA0 are user root and group dialout. You may include the user weewx into group dialout or follow the instructions Tom and Matthew gave in several of the previous threads regarding this issue. Mark

Re: [weewx-user] Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

Try adding weewx user to the dialout group and restarting weewx: sudo usermod -aG dialout weewx sudo systemctl restart weewx On Tue, Feb 6, 2024 at 1:45 PM Mark Conner wrote: > Hi, > > I recently tried to upgrade my weewx installation from 5.0 to 5.0.1 on my > Raspberry Pi 2 using 'sudo

[weewx-user] Re: Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

By chance, I just read the previous message thread and was able to use that to fix my issue. The issue for me centered around the change from running weewx as 'root' in 5.0 and before, to running as user 'weewx' in 5.0.1. I added user 'weewx' to the group 'dialout' so it could access

Re: [weewx-user] Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

I’m typing this on a phone, so my directions are necessarily incomplete, but this is probably caused by the user weewx not having the necessary permissions. Try following the instructions at this link: http://www.weewx.com/docs/5.0/upgrade/#weewx-runs-as-the-weewx-user -tk On Tue, Feb 6, 2024

[weewx-user] Permissions issue for /dev/ttyAMA0 after upgrade attempt from 5.0 to 5.0.1

Hi, I recently tried to upgrade my weewx installation from 5.0 to 5.0.1 on my Raspberry Pi 2 using 'sudo apt-get' and afterwards I was unable to start weewxd. I am reading from a Davis Vantage Pro2 with a serial logger via a MeteoPi interface. Thinking it was an upgrade problem, I downgraded to

Re: [weewx-user] weewx v5.0.1 upgrade problem

Pierre-Yves we used these commands sudo apt remove weewx then sudo apt install weewx=4.10.2-1 On Tuesday, February 6, 2024 at 10:13:38 PM UTC+3 Pierre-Yves wrote: > @ Mks Mk, > Which command did you use to perform the downgrade from v5to v4.10.2 ? > I tried "sudo apt install weewx=4.10.2" and

Re: [weewx-user] weewx v5.0.1 upgrade problem

Pierre-Yves, we used these commands Pierre-Yves sudo apt remove weewx then sudo apt install weewx=4.10.2-1 On Tuesday, February 6, 2024 at 10:13:38 PM UTC+3 Pierre-Yves wrote: > @ Mks Mk, > Which command did you use to perform the downgrade from v5to v4.10.2 ? > I tried "sudo apt install

Re: [weewx-user] weewx v5.0.1 upgrade problem

Thanks for that tip - it got me off the ground. All is now well except that /var/www/html/weewx hasn't been updated since just before I did the upgrade to 5.0.1. Anyone else seeing this? On Tuesday, February 6, 2024 at 8:09:36 AM UTC-8 Tom Hogland wrote: > In case anyone else runs into this -

Re: [weewx-user] weewx v5.0.1 upgrade problem

@ Mks Mk, Which command did you use to perform the downgrade from v5to v4.10.2 ? I tried "sudo apt install weewx=4.10.2" and "sudo apt install weewx 4.10.2" but none of these work... Thanks, Pierre-Yves Le mardi 6 février 2024 à 19:44:41 UTC+1, Mks Mk a écrit : > we just tried the upgrade

Re: [weewx-user] weewx v5.0.1 upgrade problem

we just tried the upgrade again to weewx v5.0.1 (sudo apt update) and it worked this time. (we have not done any changes to the system after the downgrade to v4.10.2) On Tuesday, February 6, 2024 at 8:32:36 PM UTC+3 Pierre-Yves wrote: > @ Matthew, thanks. I need now to "digest" all this

[weewx-user] V5.0.1 and rsyslog

Odd change - I converted my v4 weewx-multi setup to the new v5 weewx@ service, and all is well, except logging. I have rsyslog set up to put my weewx-vp2 and weewx-tempest output into individual logs, using the .conf provided. Both services have --log-label specified and 'ps -ax' output shows

Re: [weewx-user] weewx v5.0.1 upgrade problem

@ Matthew, thanks. I need now to "digest" all this information, it's a bit high level for me ;-) @ Stefanos, thanks too, I tested my USB SDR key and obtain the same result as yours : "Bus 003 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T" Pierre-Yves Le mardi 6 février

Re: [weewx-user] weewx v5.0.1 upgrade problem

i forgot to write in my last message that when you finished you must restart udev or restart the device you using( p.c , rpi ,... etc) On Tuesday, February 6, 2024 at 7:11:07 PM UTC+2 matthew wall wrote: > On Tuesday, February 6, 2024 at 11:38:24 AM UTC-5 Pierre-Yves wrote: > > It seems to be

Re: [weewx-user] weewx v5.0.1 upgrade problem

On Tuesday, February 6, 2024 at 11:38:24 AM UTC-5 Pierre-Yves wrote: It seems to be a problem of rules change. In fact, I first upgraded from 4.10.2 to 5.0.0 and weewx worked perfectly. weewx was running as root:root. weewx 5.0.0 did not modify any permissions when it upgraded from 4.10.2.

Re: [weewx-user] weewx v5.0.1 upgrade problem

I use a nooelec rtl-sdr. On a fresh install of bookworm 64bit in a Raspberry pi 4 and weewx v5 i solved the error like this: i run *lsusb* and i saw a line similar to this Bus 001 Device 008: ID 0bda:2838 Realtek Semiconductor Corp. ** "0bda" is the vendor id and "2838" is the product id

Re: [weewx-user] weewx v5.0.1 upgrade problem

@ Matthew, Thanks a lot for the feedback. It seems to be a problem of rules change. In fact, I first upgraded from 4.10.2 to 5.0.0 and weewx worked perfectly. Then I went from 5.0.0 to 5.0.1 an weewx failed to start. For Weewx,, I did a deb/rpm install and, as far I remember, I installed

Re: [weewx-user] weewx v5.0.1 upgrade problem

In case anyone else runs into this - my Ubuntu server/Davis VP2 and serial datalogger had ownership set to root:dialout, so I had to add the weewx user to the dialout group for things to work. On Tuesday, February 6, 2024 at 6:23:15 AM UTC-9 matthew wall wrote: > when you install rtl-sdr, it

Re: [weewx-user] Another Davis Vantage unable to start concern

as i understand it, the "systemd way" is one of these two: 1) override. to change behavior of a systemd unit that was installed by a deb/rpm package, use the ".d" pattern. in this case, create the overrides directory: sudo mkdir /etc/systemd/system/weewx.service.d then put this into the file

[weewx-user] Re: Klimalogg driver fails after update to weewx 5.0.0.1

On Tuesday, February 6, 2024 at 4:02:18 AM UTC-5 michael.k...@gmx.at wrote: So this is a package install? Did you do try restating already? A friend had the same error with a package install update 5.0.0 => 5.0.1 on Raspberry Pi OS, but with the ws23xx driver. He restarted the OS, then it

Re: [weewx-user] weewx v5.0.1 upgrade problem

when you install rtl-sdr, it typically, but not always, installs udev rules for *many* sdr devices. the udev rules that it installs make it possible for anyone in the 'plugdev' group to read/write to the sdr device. (this is true when you install rtl-sdr from source - if you install rtl-sdr

Re: [weewx-user] weewx v5.0.1 upgrade problem

Hello all, I just upgraded from 4.10 .2 to 5.0.1 and I seem to experiment a similar behavior. I run weewx on a RPi4. As Tom explained above, I put rtl-sdr.rules in udev directory and restarted but no change I tried to downgrade using "sudo apt install weewx=4.10.2" but that doesn't work :

Re: [weewx-user] weewx v5.0.1 upgrade problem

If you look in your log, you'll see that the rtl_433 process failed to run because of permissions problems. The log also suggests fixing the problem by installing the udev rules file "rtl-sir:rules". You can find this rules file in the rtl-sdr repository:

Re: [weewx-user] Which driver should i target for my custom weather station?

Yeah. I'm assuming you will be running Weewx on some computer other than the ESP and have a network connection between the ESP and the computer. I would use MQTT to publish the sensor data to a MQTT broker running somewhere on your network, likely Mosquitto running on the same machine as Weewx.

Re: [weewx-user] Re: New User: First Problem

Good suggestions from Michael. All I can add is to be sure and read the wiki article *Barometer, pressure, altimeter * on the differences between the three. On Tue, Feb 6, 2024 at 4:06 AM 'michael.k...@gmx.at' via weewx-user

Re: [weewx-user] Re: Klimalogg driver fails after update to weewx 5.0.0.1

With new Version 5 installs, the user owning the daemon has changed. That sometimes requires logging out, then logging back in. A reboot should not be necessary. On Tue, Feb 6, 2024 at 1:34 AM Marco Biner wrote: > Hi Michael > thanks for your hint, after a reboot it works, I did not assume that

Re: [weewx-user] Another Davis Vantage unable to start concern

One other thing to try: ask systemd to wait until the network is up before trying to start weewxd. Because you did a DEB install, your systemd unit file should be located in /lib/systemd/system/weewx.service. Under the [Unit] section, add the following two lines:

Re: [weewx-user] weewx v5.0.1 upgrade problem

Thanks a lot! I will try this later ;) On Tue, Feb 6, 2024 at 1:43 PM Dominic Reich wrote: > 'michael.k...@gmx.at' via weewx-user wrote: > > > > >sudo apt install weewx=4.10.2 > > and to not upgrade again set it on hold: > > sudo apt-mark hold weewx > > >Stefan Gliessmann schrieb am Dienstag,

Re: [weewx-user] weewx v5.0.1 upgrade problem

'michael.k...@gmx.at' via weewx-user wrote: sudo apt install weewx=4.10.2 and to not upgrade again set it on hold: sudo apt-mark hold weewx Stefan Gliessmann schrieb am Dienstag, 6. Februar 2024 um 13:02:38 UTC+1: I run weewx 4.10.2 on Ubuntu. I did an sudo apt update, too,  and

Re: [weewx-user] weewx v5.0.1 upgrade problem

sudo apt install weewx=4.10.2 Stefan Gliessmann schrieb am Dienstag, 6. Februar 2024 um 13:02:38 UTC+1: > I run weewx 4.10.2 on Ubuntu. > I did an sudo apt update, too, and weewx 5.x got installed. > Since then, weewx is no longer running. > > How did you revert back to weewx 4.10.2? > > TIA,

[weewx-user] Re: New User: First Problem

The warning tells you: WeeWX is receiving 0.0 for "pressure". You say, "The hardware console is operating correctly as expected", so the problem is somewhere in between the hardware and the LOOP. It may be, that your hardware/driver combination doesn't supply a valid value for "pressure" (it

Re: [weewx-user] weewx v5.0.1 upgrade problem

I run weewx 4.10.2 on Ubuntu. I did an sudo apt update, too, and weewx 5.x got installed. Since then, weewx is no longer running. How did you revert back to weewx 4.10.2? TIA, Stefan On Tuesday, February 6, 2024 at 10:36:52 AM UTC+1 Stefanos Kalaitzis wrote: > I had the same error with sdr

[weewx-user] New User: First Problem

Hello everyone. I installed weewx for the first time today on a Raspberry Pi Zero 2W, using a Fine Offset 3081 station that I used for about 10 years until the local cockatoos decided it would be fun to dismantle it! It came up on the second attempt after a few minor adjustments to the config

Re: [weewx-user] Which driver should i target for my custom weather station?

A few thoughts: Building the "station" on a ESP8266 doesn't sound like you are planning to get too far with your project. Compared to it's successor, it is very limited and has some really weird flaws. Why would you connect the station with a serial interface, when it has WIFI on board? p q's

Re: [weewx-user] Which driver should i target for my custom weather station?

I'm not sure if im misunderstanding what you are saying, or if i am not doing a good job at explaining my question, but even if i choose mqtt as my location to push the data, the data still needs to be in some specific format for weewx to understand it no? So on the esp8266, that has a bunch

[weewx-user] MQTT publish time after upgrade to weewx 5.0.1

hi there! i use weewx with belchertown skin and publish the data via mqtt. in versions < 5.0.1 mqtt publish the data to every full minute, like 10:01:00, 10:02:00 and so on... after upgrade the time is uneven, like: Feb 6 09:56:50 weewx weewxd[4654]: INFO weewx.restx: MQTT: Published record

Re: [weewx-user] weewx v5.0.1 upgrade problem

I had the same error with sdr driver(weewx v5 ) running on debian 12 . The problem solved by making udev rules ... maybe you are in the same situation as i was. Στις Τρί 6 Φεβ 2024, 11:29 ο χρήστης Mks Mk έγραψε: > The system was running weewx v5.0.0 with no issue then we did the upgrade > to

[weewx-user] Re: Klimalogg driver fails after update to weewx 5.0.0.1

Hi Michael thanks for your hint, after a reboot it works, I did not assume that debian adapts wind*ws style to do a reboot after updates. Regards Marco michael.k...@gmx.at schrieb am Dienstag, 6. Februar 2024 um 10:02:18 UTC+1: > So this is a package install? Did you do try restating already? A

[weewx-user] weewx v5.0.1 upgrade problem

The system was running weewx v5.0.0 with no issue then we did the upgrade to v5.0.1 (sudo apt update) and weewx failed to run. we downgraded weewx to v5.0.0 but it did not work this time, so we went back to v4.10.2 and it run just fine. did the upgrade again and got the same error.so we are back

[weewx-user] Re: Klimalogg driver fails after update to weewx 5.0.0.1

So this is a package install? Did you do try restating already? A friend had the same error with a package install update 5.0.0 => 5.0.1 on Raspberry Pi OS, but with the ws23xx driver. He restarted the OS, then it worked. Maybe restarting udev or another daemon is sufficient also, I don't

[weewx-user] Klimalogg driver fails after update to weewx 5.0.0.1

Hello seems that I am one of the rare users of the kl.py application from Matthew Wall. As google does not help me with a solution here my problem. After the last update of weewx to version 5.0.0.1 kl.py fails importing the driver: the log file reports: Feb 6 08:46:44 curlevon

Re: [weewx-user] Another Davis Vantage unable to start concern

Morning. Good suggestion on "loop on init", however I already have this setting enabled (and have for a long time). I believe this setting applies once the main loop starts, which is much later in the process. The idea of delaying the start up of WEEWX is good, and I am in favour of this