to read
now.
Once again thanks for your help
Graham
From: weewx-user@googlegroups.com <weewx-user@googlegroups.com> On Behalf Of
vk3...@gmail.com
Sent: 12 April 2018 04:42
To: weewx-user <weewx-user@googlegroups.com>
Subject: [weewx-user] Re: weewx crashes with error: unp
Thanks Susan
I just set up weewx on an older RPI and that seems to be working fine, though
still on delay of 15.
I was wondering about the wlan and ip6 messages, thanks for giving me the
solution. I had assumed it was to do with weewx.
Cheers
Graham
Get Outlook for Android<https://aka.ms/ghe
off. Ps did not show any running process for weewx
following this.
The delay of 15 seems to have resolved the issue from my perspective as it has
run continuously for 3 days but I must admit I’m puzzled by the error
Graham
Sent from my iPad
> On 9 Apr 2018, at 03:36, vk3...@gmail.com wr
to see if that throws up
any clues?
I’m going to run weewx again but with your original driver to see what happens
this time. Incidentally if I set the loop-delay to 60 secs the program doesn’t
run at all – currently set at 30secs.
Sorry to be a nuisance!
Graham
From: weewx-user
of a loss to know how.
Any suggestions gratefully received.
Graham.
From: weewx-user@googlegroups.com <weewx-user@googlegroups.com> On Behalf Of
vk3...@gmail.com
Sent: 03 April 2018 04:50
To: weewx-user <weewx-user@googlegroups.com>
Subject: Re: [weewx-user] Re: weewx crashe
Thanks Susan
I will have a go at this later today. I am a newbie at Python so it will be a
step forward on my learning curve!
Regret Bob’s driver didn’t do the trick but I’m grateful to him for the help.
Graham
Sent from my iPad
> On 3 Apr 2018, at 04:49, vk3...@gmail.com wrote:
>
>
Thanks Bob
I’ll be giving a try tomorrow.
Graham
Sent from my iPad
> On 2 Apr 2018, at 19:00, rmc...@gmail.com wrote:
>
>
>
>> On Monday, April 2, 2018 at 11:21:05 AM UTC-4, Graham Seward wrote:
>> Thanks Bob
>> I look forward to seeing it - like y
Thanks Bob
I look forward to seeing it - like you though I'm not a programmer and not
sure I'll be able to hack the driver myself - still I'll have a go!
As you say, hopefully Susan will see this.
Many thanks
Graham
--
You received this message because you are subscribed to the Google Groups
Hi
Did you ever get a solution to this issue. I have weewx running with
Susan's HP1000 driver connecting to a Maplin N23-dq (HP1000 clone). Took me
a while to get it going in first place but eventually a firmware upgrade on
the HP1000 resulted in success. However after a couple of hours of
this issue, when I got the error on the Pi, I
tried the same on another system running Ubuntu with the same results.
Then I used the "file" command for more info and got ...
graham@graham-Nuc:~/Downloads$ file weewx-3.6.1.tar.gz
weewx-3.6.1.tar.gz: POSIX tar archive (GNU)
No rep
I am new to weewx, and just installed the Python utility setup.py version
using file weewx-3.6.1.tar.gz from the downloads page. I have it running
sucessfully (Yay!), but there seems to be a discrepancy in the Users Guide
vs the downloaded source archive file compression.
Doc file:
401 - 411 of 411 matches
Mail list logo