Re: [weewx-user] Problem with GW1000 driver

My god I appreciate all the work that goes into these applications. Without them I would not be able to do what I am doing with them. It's just that sometimes something like this can get very frustrating. Apparently getting the logging levels in the system is not as simple as just bumping the

Re: [weewx-user] Problem with GW1000 driver

Thanks Gary - I forgot to read my own FAQ on where logs are located on the pi (link) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

Re: [weewx-user] Problem with GW1000 driver

As can be seen from the log extract below WeeWX logs such errors just fine. The real problem is, as I alluded to in my earlier post, that your system is not logging anything higher in level than INFO. Hence when WeeWX caught and logged the incorrect unit problem nothing was recorded in the log

Re: [weewx-user] Problem with GW1000 driver

On Monday, August 9, 2021 at 5:37:35 AM UTC-7 william@gmail.com wrote: > Turns out if the altitude config has "feet" Weewx has a tendency to crash. > Changed it to "foot" launched using /opt/weewx/bin/weewxd, no more error, > and the process did not die. > > FWIW, the correct units to use

Re: [weewx-user] Problem with GW1000 driver

OK, I am new to this GW1000 and Ambient WS-2000 thingy. I stumbled across this thread while trying to figure out why I am having problems. I would truly appreciate some help figuring this one out. Thanks. -Bill First the initial trouble shooting you will ask for.

Re: [weewx-user] Problem with GW1000 driver

OK, that is an old firmware and the command that was failing is a (relatively) recently implemented one. The WS View app should nag you to upgrade, but I guess if you don’t regularly use the app it could be missed. Might look at what the driver can do check and advise. Gary On Tuesday, 25

Re: [weewx-user] Problem with GW1000 driver

Hi Gary, I'm glad to inform you that I solved the problem upgrading the firmware of the GW1000 directly from the app. Before this upgrade it was running on firmware version GW1000A_V1.5.4, while now it is GW1000A_V1.6.6. Unfortunately I saw your message after upgrading and so I could not try

Re: [weewx-user] Problem with GW1000 driver

Hi, When the driver is interrogating your GW1000 the GW1000 is responding with some control codes that differ from those documented in the GW1000 API. Could you provide the firmware version of your GW1000 as reported in the WS View app. It would also help to see some of the raw data coming

Re: [weewx-user] Problem with GW1000 driver

If this could be helpful, using a SDR with rtl_433 I get packets like this: $ rtl_433 -f 86833 -G 4 -v time : 2021-05-24 22:10:03 model : AmbientWeather-WH31E id: 202 Channel : 1Battery : 0 Temperature: 22.5 C Humidity :

Re: [weewx-user] Problem with GW1000 driver

Hi Lang, thank you for answering. So, the configuration file is named 'piscina.conf' because I am using WeeWX in multi mode, and each station has its personal configuration file. In the specific case, I'm using the WN30 sensor for measuring a pole water temperature. Here is the complete log:

Re: [weewx-user] Problem with GW1000 driver

The WN30 is just an extra temperature sensor and belongs to the WH31 extra sensor group - only it measures only temperature and not humidity. As it is primarily meant for measuring water temperature, humidity will be always 100% and therefore measuring it makes little sense. But it works just

[weewx-user] Problem with GW1000 driver

Hi everyone, I am trying to use WeeWX with a GW1000 hardware (this ) that is receiving data from a WN30 temperature sensor (this