I’m also using SDR to receive AcuRite 5n1, Ambient Weather and Fine Offset
signals. Weewx.conf SDR step calls RTL433 to get the data. The -R parameters
specify the devices by a coded model number.
I have Not specified frequencies, and the code seems to work well.
--
You received this
So I have a similar setup to this that had been running fine in 3.9.x,
except I also have an Acurite Lightning Meter and a BME280 chip connected,
using the weewx extension from here to run it:
https://gitlab.com/wjcarpenter/bme280wx
I upgraded to Weewx 4 last night, and everything seems to be
Or you could get one of these:-
https://www.ambientweather.com/amwh32b.html
Works perfectly with SDR. Make sure you get the right frequency to match
your other sensors.
Ian
On Fri, 22 May 2020 at 05:50, Bryan Parke wrote:
> Hi Rich,
>
> Unfortunately, I didn't buy a console, just the outside
Hi Rich,
Unfortunately, I didn't buy a console, just the outside 5-in-1 sensor.
Looks like I'll be getting the BME280 and figuring that out. Thanks for
the tip!
On Thu, May 21, 2020 at 8:01 PM rich T wrote:
> If you can plug in your console, will get the pressure. If not, you can
> get a
If you can plug in your console, will get the pressure. If not, you can get
a BME280 sensor for your pressure, inside temp and humidity.
On Thursday, May 21, 2020 at 7:49:14 PM UTC-4, Bryan Parke wrote:
>
> Hi all. Weewx is great! I'm very impressed with all that it can do. Here
> is a bit
