[weewx-user] Re: Bresser 6in1 with WeeWx possible?

How does the Interceptor get its data? Does it listen to the network or does it need a wifi antenna? Andy schrieb am Montag, 16. Mai 2022 um 15:18:01 UTC+2: > The SDR dongle would be attached to your virtual server (usb passthrough) > and collect the data from your weather station. Then WeeWx

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

The SDR dongle would be attached to your virtual server (usb passthrough) and collect the data from your weather station. Then WeeWx would process the data. Or give the interceptor driver a try. There is a bit of complexity with the interceptor. Andy On Monday, May 16, 2022 at 1:35:21 AM UTC-7

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

The advantage of WIFI is that the data is sent to a server, which you might think is the best prerequisite. Why the diversions with a dongle? Keen Barete schrieb am Mittwoch, 11. Mai 2022 um 09:48:41 UTC+2: > I have the WIFI version. I have WeeWx running on a virtual machine and > this on a

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

I have the WIFI version. I have WeeWx running on a virtual machine and this on a Synology. This virtual machine has its own IP address, can I not enter this in the weather station? Or are only external addresses allowed there? Bob Atchley schrieb am Dienstag, 10. Mai 2022 um 18:36:19 UTC+2: >

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

IF you have the Bresser 6in1 with the PC console (Bresser PC 6 in 1 - 7002570) then the WS 6in1 driver fully supports this: https://github.com/bobatchley/weewx-ws6in1 If you have the WiFi version then you need to get an SDR (software defined radio) and use the SDR weewx driver:

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

I would get the SDR dongle and a WH-25 for pressure. Read this. Or here is some talk about the driver. https://groups.google.com/g/weewx-development/c/Md9kPHFe5X0 On

Re: [weewx-user] Re: Bresser 6in1

Hi Bob All sorted. Downloaded and installed the new driver, added wsType = WS5in1, deleted the UV = None from StdCalibrate/Corrections and restarted weewx. All running as hoped for, no UV output. Have also done the change to "software" for heatindex, rainRate and windchill. Many thanks to

Re: [weewx-user] Re: Bresser 6in1

Hi Paul In your case you need to 1) Either follow steps 2 and 3 of the installation in the readme.txt or if you know where the ws6in1.py is located simply replace it with the updated one from github (location is dependent on how you did the original weewx installation) 2) Update your

Re: [weewx-user] Re: Bresser 6in1

Sorry Bob, could you just walk me through updating the driver to 1.02 Thanks, Paul On Saturday, 28 November 2020 at 14:59:29 UTC Bob Atchley wrote: > Hi Paul, > > I agree with Tom. Using the 'Correction' field is a good work around, but > not really the best long term solution. > So I have

Re: [weewx-user] Re: Bresser 6in1

Hi Paul, I agree with Tom. Using the 'Correction' field is a good work around, but not really the best long term solution. So I have released 1.02 of the WS6in1 driver. Apart from updating the readme.txt giving updated details of the additional supported weather stations the only other

Re: [weewx-user] Re: Bresser 6in1

Hi Tom and Graham Good of you to contribute to the discussion but for my part I'll have to stand on the sidelines. My programming skills don't get much further than "Hello, World!" It's by good fortune I stumbled on Bob's WS6in1 driver *after* I bought my weather station. Without it I

Re: [weewx-user] Re: Bresser 6in1

maybe introduce a [[Filter]] section to complement [[Corrections]] section? would be good to clean the packet from ‘noisy’ drivers and services > On 27 Nov 2020, at 12:00 pm, Tom Keffer wrote: > > As Bob suggested, setting UV to None is the simplest solution. But, normally, > None means a bad

Re: [weewx-user] Re: Bresser 6in1

As Bob suggested, setting UV to None is the simplest solution. But, normally, None means a bad value. Really, the driver should not emit anything at all if the sensor does not exist. -tk On Thu, Nov 26, 2020 at 12:52 PM Paul Eaton wrote: > Many thanks again Bob, UV = None worked a treat. > >

[weewx-user] Re: Bresser 6in1

Many thanks again Bob, UV = None worked a treat. In a bit more detail, after adding UV = None the "UV Index" entry in WeeWX "Current Conditions" changed to read N/A although in the "High/Low" section it still read 0/0. The blank UV Index graphs were still there as there were still data (albeit

[weewx-user] Re: Bresser 6in1

Hi Paul, I'm not sure if this will work, but in another thread Gary let us know that if you are using weewx 4.2 it is possible to add corrections: [StdCalibrate] [[Corrections]] UV = None It might not work, but a simple solution if it does (may be it should be UV = Null, not sure)

[weewx-user] Re: Bresser 6in1

Not sure if I should ask this here or start a new conversation but I've got a question about how WeeWX deals with reporting UV Index. The console that comes with these 5in1 and 6in1 stations has the capability of reporting UV Index as required by the 6in1 station with a UV sensor. With the

[weewx-user] Re: Bresser 6in1

Many thanks Bob, that did the trick. Just set up on Weathercloud. ID = d0878973678 if you're interested. Have a nice evening. Regards, Paul On Tuesday, 24 November 2020 at 17:23:59 UTC Bob Atchley wrote: > Hi Paul, > > Within the weewx.conf file In the WS6in1 driver section simply add "model

[weewx-user] Re: Bresser 6in1

Hi Paul, Within the weewx.conf file In the WS6in1 driver section simply add "model = abc" as an additional parameter, replacing abc with whatever you want to call it. So mine reads: [WS6in1] # This section is for the 6in1 series of weather stations. # model - this is optional model

[weewx-user] Re: Bresser 6in1

Hi Bob, Thanks for the reply regarding the "model" parameter but it's got me a bit confused (easily done!) I've been trying to edit the weewx.conf file where there is a line "station_type = WS6in1" but as I said that doesn't seem to work. You have referred to "model = " as the line to edit to

[weewx-user] Re: Bresser 6in1

Hi Paul, Yes, I wish I had known about CCL Electronics before, almost definitely the manufacturer. I'll stick with the current name but update the Readme. As for 'About this weather station', the 'model' parameter is optionally supported, I have mine set to "model = Youshiko YC9388 (WS6in1)"

[weewx-user] Re: Bresser 6in1

Hi Bob, I think I agree with Arend about CCL Electronics. My Bresser 5 in 1 looks identical to their Pro Weather C8488B / C3113A. So, best of luck choosing another name for the driver to cover all options - I think I'd stick with WS6in1 ! A better bet might be to add to the list of models in

[weewx-user] Re: Bresser 6in1

Hi Bob, I found another brand that sells a 5-in-1 clone. But I think CCL Electronics is the original developer/manufacturer. They had the 6-in-1 on their website in the past, but can't find it anymore. I guess end of life production for our 6-in-1 model. Logia

[weewx-user] Re: Bresser 6in1

Thats a new one ! Thanks Paul. Maybe I need to rename the driver, WS6in1 doesn't quite fit any more. Garni, Ventus and Youshiko (and probably others) will probably be selling similar 5 in 1 weather stations Regards Bob -- You received this message because you are subscribed to the Google

[weewx-user] Re: Bresser 6in1

Hi Bob, Just thought you might like to know your ws6in1 driver works just as well for the Bresser PC 5 in 1 station (Model No. 7002571). It uses the same console as the PC 6 in 1 station but a simpler sensor rig (no UV). I've had it running successfully on Lubuntu 18.04 and now on a Raspberry

[weewx-user] Re: Bresser 6in1

Thanks Bob, that worked. On Wednesday, 4 November 2020 at 18:38:30 UTC Bob Atchley wrote: > Hi Peter, > > I recently reinstalled weewx and the WS6in1 driver on a RaspberryPi 4 > (previously on a rPi 2) and hit the same problem > I solved it by installing the crcmod library via the apt command:

[weewx-user] Re: Bresser 6in1

Hi Peter, I recently reinstalled weewx and the WS6in1 driver on a RaspberryPi 4 (previously on a rPi 2) and hit the same problem I solved it by installing the crcmod library via the apt command: $ sudo apt install python3-crcmod Not sure why the pip3 command didn't provide the needed files,

[weewx-user] Re: Bresser 6in1

Hi Bob, Really appreciate your help building this driver. I have the Bresser 7002570 and have just reinstalled my Pi but have run into an issue. I followed the instruction using Python 3 and pip3, so "pip3 install crcmod" After I enter "sudo wee_config --reconfigure" I complete the station

[weewx-user] Re: Bresser 6in1

Hi Stéphane The following are identical: Youshiko YC9388 Bresser PC 6 in 1 Garni 935PC Ventus W835 I think the Bresser model is the Bresser 7002570 - it should specifically mention the PC data connection. The WiFi version is not compatible as the USB connection provides power only (no data).

[weewx-user] Re: Bresser 6in1

Hello all, I want to buy a bresser station but I dont know which model to choose. ( I want to user it with weewx software on rpi2) It seems with some bresser station I will connect to weewx on rpi2 . ( the first url from this post doesnt work well ;-( ) Can someone help ? Actually I

[weewx-user] Re: Bresser 6in1

Hello Bob, Indeed you have done a very good job !!! I have a Bresser 6-1 station and everything works perfectly with my Raspberry Pi Zero W !!! That's great ! I can only thank you! Without wanting to abuse, I would however have three small things to ask you: A/ My weather station is equipped

[weewx-user] Re: Bresser 6in1

Hi Remy and Sebastien I have a Youshiko YC9388 Weather station that I believe is identical to the Bresser 6 in 1 with usb connection to a PC. I found it was incompatible with the existing weewx weather station drivers. However I have been able to reverse engineer the usb protocol and have

[weewx-user] Re: Bresser 6in1

Hello Sebastien, I have exactly the same problem as you... Connecting a Raspberry with my 6-1 Bresser via USB Do you have solve your problem ? Thank-you Sebastian ! Le dimanche 27 octobre 2019 18:45:31 UTC+1, Sebastien ROVERCH a écrit : > > > thank you for the answer. > > Do you have a brand

[weewx-user] Re: Bresser 6in1

thank you for the answer. Do you have a brand to come out for the cable and for the USB HUB? Thanks Le vendredi 25 octobre 2019 23:47:14 UTC+2, mwall a écrit : > > what other devices are connected to the rpi? > > it looks like you are having usb connection problems. you should try the >

Re: [weewx-user] Re: Bresser 6in1

I have acurite 5-in-1 but i was also having connection issues. I installed a USB hub and i also used an active USB cable to connect the display to the device which was 6 or 7 meters away. This combination seems to have fixed the problem. On Sat, Oct 26, 2019 at 4:32 PM Sebastien ROVERCH wrote:

[weewx-user] Re: Bresser 6in1

there is only the weather station that is connected to the raspberry. it's the cable of the original weather station that I use I will test with a USB HUB I will try different operating system versions / releases on the rpi thanks [image: image0.jpeg][image: image1.jpeg] > > m > --

[weewx-user] Re: Bresser 6in1

what other devices are connected to the rpi? it looks like you are having usb connection problems. you should try the following: - connect the weather station to a powered usb hub instead of directly to the pi - do not connect any other device to the pi other than the weather station - be

[weewx-user] Re: Bresser 6in1

pi@stationmeteo:~ $ sudo /home/weewx/bin/wee_device /home/weewx/weewx.conf --set

[weewx-user] Re: Bresser 6in1

I waited 1 minute for it to come out after sudo /home/weewx/bin/wee_device --info Fine Offset station settings: local time: 2019.10.24 14:55:52 CEST polling mode: ADAPTIVE abs_pressure: 0 current_pos: 0

[weewx-user] Re: Bresser 6in1

I use a raspberry pi as a computer. My weather station is connected to the raspberry lsusb -v -d 1941:8021 Bus 001 Device 004: ID 1941:8021 Dream Link WH1080 Weather Station / USB Missile Launcher Couldn't open device, some information will be missing Device Descriptor: bLength

[weewx-user] Re: Bresser 6in1

Le jeudi 24 octobre 2019 14:27:12 UTC+2, Sebastien ROVERCH a écrit : > > > either I have a driver problem > > either my weather station is not compatible with > > can not edit: > > /home/weewx/wee_device --set-interval=5 > > When > > /home/weewx/bin/wee_device --info > > I have this message

[weewx-user] Re: Bresser 6in1

On Thursday, October 24, 2019 at 8:27:12 AM UTC-4, Sebastien ROVERCH wrote: > > > either I have a driver problem > > either my weather station is not compatible with > > can not edit: > > /home/weewx/wee_device --set-interval=5 > > When > > /home/weewx/bin/wee_device --info > > I have this

[weewx-user] Re: Bresser 6in1

either I have a driver problem either my weather station is not compatible with can not edit: /home/weewx/wee_device --set-interval=5 When /home/weewx/bin/wee_device --info I have this message and nothing happens. Using configuration file /home/weewx/weewx.conf Using FineOffsetUSB

[weewx-user] Re: Bresser 6in1

posting the log from startup until after two archive intervals would help to identify what is happening. have you set the station's archive interval to 5 minutes - instead of the standard 30 minutes - using wee_device? Otherwise you will be waiting for 30 minutes to see anything!! On

[weewx-user] Re: Bresser 6in1

with "WH1080" I always have the same error message thanks Le jeudi 24 octobre 2019 09:33:44 UTC+2, Andrew Milner a écrit : > > try model = 1080 instead of 3080 > > > > On Thursday, 24 October 2019 09:30:20 UTC+3, Sebastien ROVERCH wrote: >> >> Hello, >> >> >> I bought this weather station: >> >>

[weewx-user] Re: Bresser 6in1

try model = 1080 instead of 3080 On Thursday, 24 October 2019 09:30:20 UTC+3, Sebastien ROVERCH wrote: > > Hello, > > > I bought this weather station: > > > https://www.bresser.de/en/Weather-Time/Weather-Center/BRESSER-PC-Weather-station-with-6-in-1-outdoor-sensor.html > >

[weewx-user] Re: Bresser 6in1

with the original cable and configuration [FineOffsetUSB] # This section is for the Fine Offset series of weather stations. # The station model, e.g., WH1080, WS1090, WS2080, WH3081 model = WH3081 #How often to poll the station for data, in seconds polling_interval = 60 #

[weewx-user] Re: Bresser 6in1 using Interceptor Driver?

Nobody has an idea on this 'identifiers: {}' issue? Nothing to try for me? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: Bresser 6in1 using Interceptor Driver?

My weewx.conf (don't now if it's useful?): https://pastebin.com/BX77RjvU -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com.

[weewx-user] Re: Bresser 6in1 using Interceptor Driver?

Here is my weewx.conf: # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer # See the file LICENSE.txt for your rights. ## # This section is for general configuration information. # Set to 1 for extra