thanks, I will try it
Dňa sobota, 9. marca 2019 8:29:46 UTC+1 Scott Grayban napísal(-a):
>
> For someone that is playing with Domoticz -- a HA program running on linux
> -- this should be a snap.
>
> On Friday, March 8, 2019 at 11:17:19 PM UTC-8, miso k wrote:
>>
>> No, there are several IP
For someone that is playing with Domoticz -- a HA program running on linux
-- this should be a snap.
On Friday, March 8, 2019 at 11:17:19 PM UTC-8, miso k wrote:
>
> No, there are several IP addresses that I need to edit. For me, as an user
> without Linux networking knowledges, it is not clear
The only one you need is eth0
I don't understand why this is difficult
As root type *ifconfig* and paste it here
On Friday, March 8, 2019 at 11:17:19 PM UTC-8, miso k wrote:
>
> No, there are several IP addresses that I need to edit. For me, as an user
> without Linux networking
No, there are several IP addresses that I need to edit. For me, as an user
without Linux networking knowledges, it is not clear which IP is what.
Michal
Dňa so 9. 3. 2019, 0:40 Scott Grayban napísal(a):
> It's clearly documented o how to setup hostapd.
>
> There are only 2 places you have to
On your PI as ROOT type
*ifconfig*
eth0: flags=4163 mtu 1500
> inet 192.168.0.4 netmask 255.255.255.0 broadcast 192.168.0.255
>
Second lie tells you what your IP and NETMASK is.
Now take those numbers and put them in the /etc/dhcpcd.conf like this.
and put your routers IP on
It's clearly documented o how to setup hostapd.
There are only 2 places you have to manually edit. The IP/Network that
dnsmasq uses and the SSDI ad PASSWORD that you need to connect the WS to
the newly created WiFi hotspot.
It can't get any simpler than that.
On Friday, March 8, 2019 at
domoticz running again, thanks Tom :)
@Scott: no, I dont understand Linux networking, as I wrote, I am not a PC
guy. I will check the link at the end of your man to try to understand it
deeper.
miso
so 9. 3. 2019 o 0:16 Scott Grayban napísal(a):
> There are many things in my life that are my
done.
Raspbian running, but not the Domoticz. The weewx is not generating the
webpage too...
miso
pi 8. 3. 2019 o 23:55 Tom Robertson napísal(a):
> Temporarily hook your RPI to a monitor and attach a mouse and keyboard.
> Make changed to the wifi setup. Then reboot. You can also see what IP
There are many things in my life that are my fault this is not one of
them.
It sounds like you don't understand Linux networking and need to take some
classes online.
And for the record my HOWTO has been followed by a few people with no
issues... So yes it is TRUE.
On Friday, March 8,
Temporarily hook your RPI to a monitor and attach a mouse and keyboard. Make
changed to the wifi setup. Then reboot. You can also see what IP address was
assigned to the RPI.
-
Tom
> On Mar 8, 2019, at 4:23 PM, miso wrote:
>
> F**CK!!!
> That is not true! I have Ruined my whole
F**CK!!!
That is not true! I have Ruined my whole Domoticz setup. I cant connect to
my RPi now at all!!! so much hours wasted!!
miso
pi 8. 3. 2019 o 22:36 Scott Grayban napísal(a):
> There are only 2 places you edit -- the PI's IP for eth0
> and
> The WiFi SSDI name and Password.
There are only 2 places you edit -- the PI's IP for eth0
and
The WiFi SSDI name and Password.
Everything else is copy/paste.
On Friday, March 8, 2019 at 1:29:05 PM UTC-8, Scott Grayban wrote:
>
> Directions are clearly written in the HOWTO
>
> Follow them
>
--
You received this message because
Directions are clearly written in the HOWTO
Follow them
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
For more
thanks Scott,
i have done everything until this:
https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-your-static-ip
interface eth0
static ip_address=192.168.0.4/255.255.255.0 *Raspberry one, or Weather
WS connects to hostapd WiFi which observer sniffs port 80 to pull the data
the console is sending which is then saved to the weewx db.
All that creates the webpages for the weather.
On Wednesday, March 6, 2019 at 10:02:29 PM UTC-8, miso k wrote:
>
> I did not setup any hostapd. Did not know
the prerequisites in the wiki link you posted said to install hostapad
(under the bit about removing bind9) - and dnsmasq and goes on to tell you
how to configure both of those.
On Thursday, 7 March 2019 08:02:29 UTC+2, miso k wrote:
>
> I did not setup any hostapd. Did not know about it.
>
I did not setup any hostapd. Did not know about it.
https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver
So raspberry will be running hostapd and the weatherstation display will be
connected to raspberry?
Sorry for the stupid questions, I am not a programmer, just an
Looks like nothing is getting sniffed from port 80. Are you sure you setup
hostapd correctly and linked your console to that wifi ssdi ?
On Wednesday, March 6, 2019 at 6:22:50 AM UTC-8, miso k wrote:
>
> so it continues always with the line Mar 6 14:08:13 *raspberrypi
> weewx[25014]:
so it continues always with the line Mar 6 14:08:13 *raspberrypi
weewx[25014]: interceptor: MainThread: empty queue*
pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog*
Mar 6 14:06:23 raspberrypi weewx[25014]: interceptor: MainThread: empty
queue
Mar 6 14:06:33 raspberrypi
so it continues always with the line Mar 6 14:08:13 *raspberrypi
weewx[25014]: interceptor: MainThread: empty queue*
pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog*
Mar 6 14:06:23 raspberrypi weewx[25014]: interceptor: MainThread: empty
queue
Mar 6 14:06:33 raspberrypi
I need to see more of the log. Let it cycle a few times so I can see what
it's doing.
On Wednesday, March 6, 2019 at 1:26:18 AM UTC-8, miso k wrote:
>
> thank you Scott,
> this is the result:
>
> pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog*
> Mar 6 10:22:42 raspberrypi
thank you Scott,
this is the result:
pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog*
Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Finished loading service
weewx.restx.StdAWEKAS
Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Loading service
weewx.engine.StdPrint
Mar 6
Helps if you paste logs and set debug = 1 in the weewx.conf
On Monday, March 4, 2019 at 4:11:43 AM UTC-8, miso k wrote:
>
> Hello.
>
> I am trying to make the weewx to work with *Eurochron EFWS2900*, which is
> practically the same like *Fine Offset WH2900 / Ambient Weather
> WS-2902A. *
> I
23 matches
Mail list logo
