Helps if you paste logs and set debug = 1 in the weewx.conf
On Monday, March 4, 2019 at 4:11:43 AM UTC-8, miso k wrote: > > Hello. > > I am trying to make the weewx to work with *Eurochron EFWS2900*, which is > practically the same like *Fine Offset WH2900 / Ambient Weather > WS-2902A. * > I am using intercept driver, but I dont know if I have set it up > correctly. The Webpage is not refreshing. > > this is beginning of my weewx.conf file: > > > # This section is for information about the station. > [Station] > > # Description of the station location > location = "Trencianske Jastrabie, Hlboka ulica, 320mnm" > > # Latitude and longitude in decimal degrees > latitude = 48.801 > longitude = 18.103 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 320, meter > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = Interceptor > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 0 > > ############################################################################## > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge, smarthub, or access > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > # wu-client - any hardware that uses the weather underground protocol > device_type = observer > mode = sniff > iface = wlan0 > pcap_filter = src 192.168.1.151 and dst port 80 > # port = 8080 > # address = 192.168.1.151 > > ############################################################################## > [Simulator] > # This section is for the weewx weather station simulator > > # The time (in seconds) between LOOP packets. > loop_interval = 2.5 > > # The simulator mode can be either 'simulator' or 'generator'. > # Real-time simulator. Sleep between each LOOP packet. > mode = simulator > # Generator. Emit LOOP packets as fast as possible (useful for > testing). > #mode = generator > > # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the > default > # is to use the present time. > #start = 2011-01-01T00:00 > > # The driver to use: > driver = weewx.drivers.simulator > > > What do I do wrong there? > > Thank you, > Michal > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
