Re: [weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-13 Thread G Hammer
As I outlined in the original post, yes the console is receiving data fine. I tried running rtl_433 and weewx directly with no WH65B received. Then, decided it was a signal issue at the SDR location. Maybe having a ground plane would help. So with the antenna perched atop a tomato soup can in

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-13 Thread torrin
Try running rtl_433 from the command line: rtl_433 -q -M utc -F json -p 39.741 -G -f 91498 Check all of the packets received. I ran into an issue where the SDR was reading WH24 instead of WH65B, I had to move my antenna around a bit to get it to read the WH65B and it has not been and

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-13 Thread G Hammer
It seems that data collection is not my sweet spot. Yesterday, WH65B data stopped being recorded. Nothing, and I mean nothing, had changed. The WH25B still was being seen/recorded so I know the SDR portion is fine. Perhaps low battery or some other failure with the outdoor sensor? No, since it

Re: [weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-06 Thread G Hammer
Updated to 3.9.1, installed the weewx_sdr driver, edited the config file, started weewx, presto! All looks good on my website and the various services I report to. I'll monitor it for any unusual behavior, but it looks good right now. I do see this logged each time I use the driver directly or

Re: [weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-06 Thread Tor rin
I was happy to help, good luck with the rest of the configuration, I have mine working fairly seamlessly now. On Wed, Feb 6, 2019 at 5:23 PM G Hammer wrote: > Thanks to Matthew and Tor for the idea of getting data via an SDR and for > assisting in getting the WH65B and WH25B recognized. > I

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-06 Thread G Hammer
Thanks to Matthew and Tor for the idea of getting data via an SDR and for assisting in getting the WH65B and WH25B recognized. I have the data flowing now and will configure WeeWX to use it later this evening. Finally, no more sniffing WiFi, which has been the bane of my existence for months

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-02 Thread torrin
Yup, but I am seeing and error and not capturing any data from the WH32B. I created an issue, but no one has picked it up yet. I will post back if I get anywhere. On Saturday, February 2, 2019 at 3:28:34 PM UTC-6, G Hammer wrote: > > That may be just the ticket until the 32B is supported. >

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-02 Thread G Hammer
That may be just the ticket until the 32B is supported. So, you've done the steps to get a new device added? On Saturday, February 2, 2019 at 4:15:49 PM UTC-5, tor...@torrin.org wrote: > > I have been researching this and I cannot find the WH32B either on 915mhz > (which it is supposed to be on)

[weewx-user] Re: SDR, rtl_433, WH65B, and WH32B

2019-02-02 Thread torrin
I have been researching this and I cannot find the WH32B either on 915mhz (which it is supposed to be on) or 433mhz. I am working with the rtl_433 folks trying to figure it out. In the mean time, I picked up a WH25, which is supported in rtl_433 and is only $16 at AW. On Saturday, February