I wouldn't give up on your Acurite so quickly. In its price range, it's
actually pretty good.
First, make sure your fan is working. Check it during a weekend, or ask a
neighbor/wife to check it.
Second, make some sort of shade cover for it. Depending on the shape of the
sensor, a white yogurt con
Well, that's disheartening. This station was a gift from my wife and I've
tried every way I know of to make it accurate but there just doesn't seem
to be a way. I have two consoles and neither of them agree on temperature,
humidity or inside temperature. The weewx server seems to read the sensor
Hi,
I appreciate you have come up with a solution to your question 3 but,
depending on your requirements, an alternative may be to create a fairly
basic report to create an ascii file to provide the data you want, then you
could simply do $cat filename from the command prompt to display the fil
There's no *a priori* way to model the needed correction. You would have to
install a thermometer that gives you the true in-the-shade, aspirated
temperature, and leave it there for many months to build the model data
you'd need for the correction. Then you could remove it.
At the end of the day (
Not that I know of, although some people have added solar cells to make the
fan in the 5-in-1 spin faster.
Since I'm using SDR, I've decided to remap temperature and humidity to be
read from a different sensor (the lightning one, in this case). I thought
I had picked a good spot, but the tempe
The reboot solved the issue.
Thanks for the tip.
//a
2017-04-12 17:28 GMT+02:00 vince :
> On Wednesday, April 12, 2017 at 7:16:52 AM UTC-7, Ansi wrote:
>>
>> I used raspi-config to change the LOCAL, but have not rebooted the
>> raspberry yet.
>> I'll try that first.
>>
>>>
>>>
> raspi-config run
That should have said "data"... I hate auto correct!
On Wednesday, April 12, 2017 at 11:33:38 AM UTC-5, Tony Turner wrote:
>
> I have an Acurite 01525A1 connected by USB to an OrangePI ONE running
> Armbian Ubuntu Xenial and weewx v3.6.2. When the weather is cloudy the
> temperature seems to be
I have an Acurite 01525A1 connected by USB to an OrangePI ONE running
Armbian Ubuntu Xenial and weewx v3.6.2. When the weather is cloudy the
temperature seems to be relatively accurate compared to my old weather
station and other stations close to me. But on really sunny days when the
sun comes
On Wednesday, April 12, 2017 at 7:16:52 AM UTC-7, Ansi wrote:
>
> I used raspi-config to change the LOCAL, but have not rebooted the
> raspberry yet.
> I'll try that first.
>
>>
>>
raspi-config runs the dpkg utilities for you, just with a simpler
interface, so the results are the same.
you 'alwa
Hi,
I used raspi-config to change the LOCAL, but have not rebooted the
raspberry yet.
I'll try that first.
Thx
//a
Den onsdag 12 april 2017 kl. 11:21:08 UTC+2 skrev Ansi:
>
> Hi,
>
> I installed weewx on the raspberry with GB LOCAL settings a few days ago
> and some days later I changed the LO
Yes, the station had no batteries. I was also hoping it would work without
having to reboot te pi.
I don't know if this makes any difference, but I have a WH-3080. This type
suffers from the USB lockout but has one advantage: if you are quick in
removing and puting back the USB cable, the memory i
Il giorno mercoledì 12 aprile 2017 14:52:38 UTC+2, Alexandros Bagos ha
scritto:
>
> Hello,
> I have tried to setup weewx on a raspberry Pi2 B+ which supports per-port
> USB power on/off to reset the port of a locked Fine Offset, but it didn't
> work as expected. From the logs I could see that
How did you change locales? Did you use dpkg-reconfigure?
*sudo dpkg-reconfigure locales*
Select sv_SE.UTF-8. The configuration information for Swedish will then be
generated. Then pick it as the default locale.
When dpkg-reconfigure is all done, any old shells will still have the old
locale, s
Hello,
I have tried to setup weewx on a raspberry Pi2 B+ which supports per-port
USB power on/off to reset the port of a locked Fine Offset, but it didn't
work as expected. From the logs I could see that the port was actually
being controlled but after puting the power back on it wouldn't initializ
On Tuesdayì 29 settembre 2015 16:46:38 UTC+2, mwall ha scritto:
>
> On Tuesday, September 29, 2015 at 10:34:02 AM UTC-4, Matías Laporte wrote:
>>
>> Hello everybody. I've been googling for a while but I'm not able to find
>> an answer to this, or someone that has this setup and can confirm what
That was the problem.
as described i dumped the logger data. The dump started at 5.4. runs till
today and then from march up to 7.4!?
Then i cleared the logger memory.
Now everything seems to work fine.
Thank you!
Hardy
Am Mittwoch, 12. April 2017 12:01:56 UTC+2 schrieb gjr80:
>
> Hi,
>
> S
Hi,
To remove bad data have a look at the "Cleaning up old 'bad' data" wiki entry
https://github.com/weewx/weewx/wiki/Cleaning-up-old-'bad'-data. You may find
some other ideas by searching the forum.
To (help) prevent it getting into the database to start with have a look at the
StdQC service
Hi,
Sounds like a case of corrupt station memory, can happen with vantages when the
power plays up. Have a look at the section 'WeeWX generates HTML pages, but it
does not update them' in the User's Guide
http://weewx.com/docs/usersguide.htm#html_generated_but_not_updated. Try the
steps under
Hi,
a week ago at 5.4. we had a voltage drop for a few hours. After the return
of the voltage, it seems that weewx made one (or two?) correct cycles of
generating images and data for steelseries.
Then weewx put fresh files, generated from the template files into the
webspace, but the files have
Hi,
I installed weewx on the raspberry with GB LOCAL settings a few days ago
and some days later I changed the LOCAL with the raspi-config to Sweden/SE
settings and now will the weewx not start up after the change.
I forgott the change the LOCAL after the raspberry was installed.
Error message
I am getting the odd spike in my readings, for example:
TEMPERATURE (C), RAIN (mm), WIND SPEED (knots)
HEAT COOL AVG
MEAN DEGDEG
WIND DOM
DAY TEMP HIGH
21 matches
Mail list logo
