I found the solution myself.
In csv.py :
if self.binding == 'binding':
self.binding = d.get('binding', 'loop')
## if self.binding == 'loop':
if self.binding == 'binding':
self.bind(weewx.NEW_LOOP_PACKET, self.handle_new_loop)
else:
Hi Ian,
So I decided to do a new install of both weewx and the very latest
Weather34 Template (just got tonight) on another raspberry Pi to test
things. Since I have only one weather station I choose the interceptor
driver on the new system (did some minor changes to it so it could handle
2316
John
Right now they are using a RFM69 (don't know if they interfacing with a
RPI) to interface with the Davis Vantage Pro 2 ISS, so I don't see why you
can not use a RFM95W. Did you try searching WXforums? Right now I'm
receiving data from my Davis Vantage Pro 2 ISS without any issues using a
I have recently picked up a couple inexpensive ESP32 / LoRa dev boards
with an integrated RFM95W rf module in the 902-928 MHz range. I haven't
delved into the radio capabilities outside of the LoRa modes but perusing
the specs it seems like these might be a candidate for talking to the Davis
V
On Saturday, May 25, 2019 at 9:12:23 AM UTC-7, vince wrote:
>
> On Friday, May 24, 2019 at 6:52:08 PM UTC-7, Joel Bion wrote:
>>
>> Thoughts? (and yes, I think moving to Python 3 should be a higher
>> priority than this)
>>
>>
> Thoughts ?
> Sure - triple what you are paying for weewx and maybe so
My weewx.conf (don't now if it's useful?): https://pastebin.com/BX77RjvU
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
T
Here is my weewx.conf:
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer
# See the file LICENSE.txt for your rights.
##
# This section is for general configuration information.
# Set to 1 for extra d
I have been experiencing similar problems recently with my Vantage Pro 2
console and RPI (Zero W) setup, typically after a prolonged (1+ hours)
power outage. My only recovery method so far has been to clear the logger
which unfortunately leaves me without the storm data that initiated the
powe
On Friday, May 24, 2019 at 6:52:08 PM UTC-7, Joel Bion wrote:
>
> Thoughts? (and yes, I think moving to Python 3 should be a higher priority
> than this)
>
>
Thoughts ?
Sure - triple what you are paying for weewx and maybe somebody might
consider it.
Only partially kidding there. Maybe.
We're a
thanks but it has not worked.
I have found a solution:
I put in the system es_ES and I modified the locale es_ES to put the
decimal points. I have generated the locale (locale-gen) again and now it
seems that it works.
Thank you.
El sábado, 25 de mayo de 2019, 17:05:36 (UTC+2), Pat escribió:
Yes, so do the opposite of what I am proposing. Set your server back to ES,
and set skin.conf belchertown_locale to en_US.UTF-8
On Saturday, May 25, 2019 at 10:32:27 AM UTC-4, Juan Antonio Mosquera wrote:
>
> Yes, it's in the US because I want a decimal point separator. But I want
> to configure
Yes, it's in the US because I want a decimal point separator. But I want to
configure local ES and decimal separator with points, you understand me?
thanks.
El sábado, 25 de mayo de 2019, 16:28:24 (UTC+2), Pat escribió:
>
> I am on mobile right now but I can see that your locale is set to United
I am on mobile right now but I can see that your locale is set to United
States English based on your weewx_data.json file on your site. You can
either change the locale on your server to be Spanish (preferred) or change
the skin.conf locale setting to not be auto and use es_ES.UTF-8. Then
restart
ok, thanks.
Now 1.0 is running and translate to spanish.
a doubt. Is it possible to configure the belchertown to use a decimal point
separator and a locale in Spanish?
Thanks.
El sábado, 25 de mayo de 2019, 14:25:45 (UTC+2), Pat escribió:
>
> Here's the instructions on how to upgrade, also in
So this is where I am...
These all seem reasonable (but then scroll for the problem which starts with
yesterday's date):
pi@nixie:/usr/share/weewx4/bin $ ./wunderfixer --epsilon=125 --date=2019-05-21
--test --verbose | more
Using configuration file /usr/share/weewx4/weewx.conf.
Using database bi
Here's the instructions on how to upgrade, also in a couple of languages.
https://github.com/poblabs/weewx-belchertown/wiki/Upgrading-to-Belchertown-skin-1.0
When 1.0 is ready for public release I'll let everyone know. Until then if
you want to help with the testing please raise issues on the Gi
Anyone is welcome to try out the 1.0 beta. There's a few people helping
with the translations here at
https://github.com/poblabs/weewx-belchertown/issues/104 with 165 replies so
far. We've made a lot of progress to use the Labels to make the skin easy
to translate.
The charts are fully re-don
Thank you,
Im not able to reach the Alecto this way, but as far i know a webserver is
not provided, so that would be normal I think.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it
Hey, Gary,
I figured this out last night with a cue from Tom. But it requires modifying
two different classes in restx.py, similar to the way you mentioned and I am a
little uncomfortable with it, since I don't know all the different touch points
/ ramifications for other code.
Also, somethin
No problem...
I compress dev branch and install this beta version.
www.meteomontaos.es
Thanks.
El sábado, 25 de mayo de 2019, 11:21:09 (UTC+2), Juan Antonio Mosquera
escribió:
>
> Where is the zip of version 1.0 beta?
>
> El sábado, 18 de mayo de 2019, 14:44:08 (UTC+2), Pat escribió:
>>
>> Thi
Is it posible a port problem, can you http://x.x.x.x to the alecto
weatherstation?
Op donderdag 23 mei 2019 21:48:49 UTC+2 schreef Roy Rutten:
>
> Hi,
>
> A question from a noob here. I've been trying and searching but it seems
> like i'm missing something.
>
> I have recently bought an Alecto W
I use a WH2600 weatherstation with a raspberry pi
debian8
weewx 3.9.1
driver interceptor observer
csv.py to collect the data to a csv-file
with weewx 3.8 it works ok, after upgrade to 3.9 it fails
I have some things overlooked?
JanC
--
You received this message because you are subscribed to t
Where is the zip of version 1.0 beta?
El sábado, 18 de mayo de 2019, 14:44:08 (UTC+2), Pat escribió:
>
> This is a bug which will be fixed in the next version, 1.0. It is due to
> there being no earthquakes in your area and no timestamp being available.
>
> To fix this, either disable earthquake
Hello,
I want to try the DEV version of Belchertown at www.meteomontaos.gal
What is the procedure ?.
You could also collaborate in the Spanish and Galician translation
(https://github.com/juanantoniomosquera/weewx-belchertown)
Greetings.
El sábado, 18 de mayo de 2019, 14:44:08 (UTC+2), Pat escr
Thanks Gary,
I have started a new topic at weewx-development: -
https://groups.google.com/forum/m/#!topic/weewx-development/ntta9iQO9-g
See you there,
Ian
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop
Andrew,
I think you might mean word processors or other 'formatted' editors. I
would be lost without a GUI code editor.
gry
On Saturday, 25 May 2019 17:00:25 UTC+10, Andrew Milner wrote:
>
> you can use nano - or any other TEXT editor (avoid GUI editors) to edit
> weewx.conf
>
>
>
> On Saturda
you can use nano - or any other TEXT editor (avoid GUI editors) to edit
weewx.conf
On Saturday, 25 May 2019 09:05:45 UTC+3, Günther Wrana wrote:
>
> Hallo
>
> nach dem ich den Syntax verstanden habe und folgende Zeilen im Terminal
> eingegeben habe hat es funktioniert.
>
> pi@raspberrypi:~ $ s
27 matches
Mail list logo