Thanks, works like a charm.
Geni
Am Sonntag, 29. Dezember 2019 19:46:09 UTC+1 schrieb Thomas Keffer:
>
> I apologize for it not being very obvious where to change this. You need
> to change it in weewx.conf.
>
> [StdReport]
>[[Defaults]]
> [[[Units]]]
> Labels
>
Hi,
The os.rename command is attempting to rename the temporary file containing
the gauge-data.txt output to the final destination path/file. Judging by
the error I an guessing the temporary file has disappeared between its
creation and the call to os.rename. Impossible to say much more
I have AcuRite 02064C, and yes running a Raspberry Pi Zero W. Generated
Website: weather.jafaral.com
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
What type of WX station do you have? Are you running it on a Raspberry Pi?
On Monday, December 30, 2019 at 12:24:49 AM UTC-5, Jafar Al-Gharaibeh wrote:
>
> Thomas,
>
> Thank you very much. I tested that and it worked. Now I get these
> fields on the generated website:
>
> Heat Index N/A
>
What type of station are you do you have?
On Monday, December 30, 2019 at 12:24:49 AM UTC-5, Jafar Al-Gharaibeh wrote:
>
> Thomas,
>
> Thank you very much. I tested that and it worked. Now I get these
> fields on the generated website:
>
> Heat Index N/A
> Dewpoint N/A
> Humidity N/A
>
> Is
Thomas,
Thank you very much. I tested that and it worked. Now I get these
fields on the generated website:
Heat Index N/A
Dewpoint N/A
Humidity N/A
Is there a way to feed humidity data from another external source so that I
can get Heat Index and Dewpoint values calculated ? I can easily
Steve
What type of webcam are you using? You never mention what brand of webcam.
If we know the type, maybe someone can help you on configuring it.
On Wednesday, December 25, 2019 at 5:07:33 PM UTC-5, Steve2Q wrote:
> Still no luck..I am continuing my research.
>
> On Tue, Dec 24, 2019,
Steve
You never mentioned the webcam brand. If we know what the brand it is,
someone might be able to lead you in the proper direction.
On Tuesday, December 24, 2019 at 9:36:57 AM UTC-5, Steve2Q wrote:
> Hello (and Happy Holidays to all!) I am trying to have the image from a
> streaming
the weewx-interceptor driver has been updated with explicit support for the
gw1000 wifi bridge, as well as support for weewx4/python3.
instructions are at the weewx wiki:
https://github.com/weewx/weewx/wiki/gw1000-recipe
i would especially appreciate feedback from anyone with full sensor
Steve
Peter Quinn response was correct, but you didnt answer.
Is your camera capable of streaming without specific client?
Can you access your camera, image, video outside your network?
Most people doesn't not understand that most consumer webcameras are not
capable of direct streaming, but
Wondering if anyone can help me understand this error I'm getting:
Dec 29 22:30:20 a4fc2e292c92 weewx[14695]: rtgdthread: Traceback (most
recent call last): Dec 29 22:30:20 a4fc2e292c92 weewx[14695]: rtgdthread:
File "/usr/share/weewx/user/rtgd.py", line 1058, in process_packet Dec
Everything seems to be working with the Belchertown skin except the Reports
page. When the page loads, it shows my 404 page rather than the
preformatted NOAA text file. I have tried a variety of things to figure
this out, but have come up blank.
I looked in the folder and see both a
If you truly want to disable it, set its value to None. in weewx.conf, set
it under [StdCalibrate]
[StdCalibrate]
[[Corrections]]
outHumidity = None
-tk
On Sun, Dec 29, 2019 at 11:54 AM Jafar Al-Gharaibeh
wrote:
> The humidity sensor has failed in my weather station giving 99% reading
>
hi
I have the same issue, Humidity stay always 100% ( with a bme280 on a
RPi directly)
Patrick
Le 29/12/2019 à 19:54, Jafar Al-Gharaibeh a écrit :
The humidity sensor has failed in my weather station giving 99% reading all the
time. Is there an easy way to disable that sensor in weewx? Or
No, but thanks. It's not something that has to be changed very often. In
fact, this is the first time I recall it coming up.
-tk
On Sun, Dec 29, 2019 at 1:09 PM p q wrote:
> Want me to add it to the customization docs someplace?
>
> On Sun, Dec 29, 2019 at 10:46 AM Thomas Keffer wrote:
>
>> I
On Sunday, December 29, 2019 at 10:54:55 AM UTC-8, Jafar Al-Gharaibeh wrote:
>
> The humidity sensor has failed in my weather station giving 99% reading
> all the time. Is there an easy way to disable that sensor in weewx?
You could try using the StdQc feature and setting a max of 95% to make
Want me to add it to the customization docs someplace?
On Sun, Dec 29, 2019 at 10:46 AM Thomas Keffer wrote:
> I apologize for it not being very obvious where to change this. You need
> to change it in weewx.conf.
>
> [StdReport]
>[[Defaults]]
> [[[Units]]]
>
The humidity sensor has failed in my weather station giving 99% reading all the
time. Is there an easy way to disable that sensor in weewx? Or better, is there
a way to pull this data from other nearby stations?
Thanks.
--
You received this message because you are subscribed to the Google
I apologize for it not being very obvious where to change this. You need to
change it in weewx.conf.
[StdReport]
[[Defaults]]
[[[Units]]]
Labels
mm_per_hour = " mm/h"
It is not necessary to restart weewx. The changes will be picked up at the
next
If all else fails, you can edit the template to put out the number with no
formatting (.raw) and put in your own text for the unit. There should be a
simple way to do this that doesn't require hacking the python code or doing
the formatting manually, but I don't know where it is in your setup. I
On Monday, December 2, 2019 at 8:31:59 PM UTC-5, Johnny H wrote:
>
>
> I'm receiving data into my rpi weewx from my gw1000u (I had to make up my
> serial number - took a while to find that little gem).
> Also uploading to pwsweather OK - however my data isn't what I expect.
> The tx60 only has
Sure, more than once.
TypeApp for Android herunterladen
Am 29. Dez. 2019, 19:03, um 19:03, p q schrieb:
>Did you restart weewx?
>
>On Sun, Dec 29, 2019 at 10:00 AM Geni wrote:
>
>> I have edit units.py and make the change in line 405, "mm_per_hour"
>> : " mm/h",.
>> But it has not changed
Did you restart weewx?
On Sun, Dec 29, 2019 at 10:00 AM Geni wrote:
> I have edit units.py and make the change in line 405, "mm_per_hour"
> : " mm/h",.
> But it has not changed on my webpage!
>
> Am Sonntag, 29. Dezember 2019 16:05:12 UTC+1 schrieb Geni:
>>
>> Hello,
>>
>> i use weewx 3.9.2 on
I have edit units.py and make the change in line 405, "mm_per_hour"
: " mm/h",.
But it has not changed on my webpage!
Am Sonntag, 29. Dezember 2019 16:05:12 UTC+1 schrieb Geni:
>
> Hello,
>
> i use weewx 3.9.2 on a raspberry 3+ with a mysql database, the template is
> season.
>
The old version that I have, in the Standard skin, there's a line that has
cm_per_hour = " cm/hr" in the Labels section. You might try putting
mm_per_hour = " mm/h" in there. I don't know where your skin defines the
unit text.
A more drastic change but one that I'm confident would work would be
What can I change or add in my skin.conf?
Am Sonntag, 29. Dezember 2019 16:05:12 UTC+1 schrieb Geni:
>
> Hello,
>
> i use weewx 3.9.2 on a raspberry 3+ with a mysql database, the template is
> season.
> unfortunately since switching to a new raspberry the rainrate is displayed
> with xx mm/hr
Doesn't look like Cheetah actually installed. Did you check that last path
for existence and permissions?
I've never see a /private/tmp path before, so if the path is invalid, it
won't work. You can always create it
with the same permissions as /tmp, but I'd wonder why that is necessary in
Check your skin.conf file in the [[Labels]] section. See the docs here:
http://weewx.com/docs/customizing.htm#how_to_change_labels
The docs don't specifically mention rain rate, but you should be able to
find it in the skin.conf.
On Sun, Dec 29, 2019 at 7:05 AM Geni wrote:
> Hello,
>
> i use
Hello,
i use weewx 3.9.2 on a raspberry 3+ with a mysql database, the template is
season.
unfortunately since switching to a new raspberry the rainrate is displayed
with xx mm/hr but i want mm/h.
What do I have to change so that the rain rate is displayed in mm/h?
Thanks, Geni
Livesite is
Thanks for that Andrew, that was super helpful and now the problem appears
to be solved.
I would still love a solution for checking the signal between the sensor
and the SDR dongle if anyone has any ideas?
Thanks
On Sun, 29 Dec 2019, 13:20 Andrew Milner,
wrote:
> try this youtube
>
>
I know you say that you did the install of Cheetah, but for whatever
reason, it looks like Cheetah did not install, at least not anywhere python
can find it.
One thing I've discovered: you cannot use pip in the directory where you
unpack the weewx tarball. The reason is that pip sees the
try this youtube
https://www.youtube.com/watch?v=OVsqGX0iBOM
it should help you
On Sunday, 29 December 2019 09:20:53 UTC+2, Sean Jahnig wrote:
>
> Thanks for the reply.
>
> It is 300. You are right, if i wait 10min it has started reporting so it
> is working.
>
> I am having intermittent
32 matches
Mail list logo
