Re: [weewx-user] Re-installed weewx using setup.py and now it won't start at boot

Thanks Vince, That is good advice. I tried that more than once and the problem persists so i'm ready to drive out to the location and collect the SD card to format it so i can start fresh. This is the first weather station I built so I probably did something wrong when I first set it up. I

Re: [weewx-user] Pull data from Acurite station to weewx database

I have one of these. I've never tried to do it. Acurite has some software to download the data into a CSV and it would be possible to import that into the weewx database. If it's a one time thing, you could

[weewx-user] Pull data from Acurite station to weewx database

Hello, While on vacation, my computer turned off and weewx did not record data for several days. I have an Acurite 5 in 1, which I understand keeps about a month of data. So I think the missing data is on the weather station. Is there a way to get the data from the Acurite weather station and

Re: [weewx-user] Re-installed weewx using setup.py and now it won't start at boot

You're changing too many things and not completely cleaning up what you had before. I'd suggest starting over with the Simulator then switching to the real driver you want to use (presumably SDR from your previous posts). - Remove the debian package. Remove the /etc/weewx tree if it still

Re: [weewx-user] problem reinstalling weewx

You didn't say what operating system you are using, but a Python 3 version of Cheetah is not available on Debian 9 systems. What operating system are you using? Here are a few options: 1. Upgrade to Debian 10; 2. Or, use Python 2; 3. Or, install using pip: pip3 install cheetah3 The last is

[weewx-user] problem reinstalling weewx

I have been a long time away as I had A: other interests/problems to solve and B weewx works still without problems. However I'm still working with version 4.1.1 and I think it's becoming time to upgrade to 1.5. However there is a problem.When I try to upgrade using apt I get the following

Re: [weewx-user] Re-installed weewx using setup.py and now it won't start at boot

Thanks Vince, Yes, weewx runs perfectly when i start it manually. If i reboot, it does not start automatically. I'm convinced the previous install of weewx has left some confusion on the system. In fact, i tried to install weewx from deb again and it also wasn't starting automatically. I think

Re: [weewx-user] Highchart Air Quality

if all you want is to convert PM2.5 using the US EPA AQI tables i.e. not get variants or labels, see weewx extension http://geddy.id.au/downloads/weewx-aqixtypes-0.0.2.tar.gz (haven’t got around to putting lots of stuff up on github

Re: [weewx-user] Re-installed weewx using setup.py and now it won't start at boot

Why the discussion re init.d ? Looking at my system, weewx appears to use systemd, so: systemctl status weewx should show whether weewx is running and something like (not tested) sudo systemctl enable weewx.service to make weewx run on bootup. Weewx newbie here, so it may not be so simple.

[weewx-user] Data Migration 3.6.1 > 4.5.1

Hello all, I am planning to upgrade my WeeWx installation to a new RPi, also using new weatherstation hardware (currently using WMR200, going to DP1500). My current data is stored in a MySQL DB under WeeWx v3.6.1. I wonder what is the best way to get all my historical data in the new DB? Can I

Re: [weewx-user] Re-installed weewx using setup.py and now it won't start at boot

It's rather hard to tell what it's doing based on you (re)starting the service versus running manually perhaps. At Jul 5 08:04:52 I see a keyboard interrupt then another start at 08:05:17 which seems to run. At 08:10:19 it adds a record to the db but fails to run the Seasons skin due to the

Re: [weewx-user] Highchart Air Quality

Hi Mitchell, I've done what you want on mine, see bottom left of the page at -> http://metoffice.skybase.net/ In weewx.conf I have... # Options for extension 'aqi' [AqiService]     [[standard]]     data_binding = aqi_binding     standard = user.aqi.us.NowCast     [[air_sensor]]