Re: [weewx-user] Re: Belchertown Skin 0.8.2 Released

Is the belchertown root URL set? On Fri, Feb 15, 2019, 5:28 PM Joe Spears I installed the Belchertown skin and I get none of the graphs. The > weather data and report data show just fine. Looking at my log I see that > Highcharts runs but nothing is being copied for every instance of >

[weewx-user] Re: Belchertown Skin 0.8.2 Released

I installed the Belchertown skin and I get none of the graphs. The weather data and report data show just fine. Looking at my log I see that Highcharts runs but nothing is being copied for every instance of Highcharts. Any suggestions? Thanks. Joe Feb 15 17:11:05 weewx wee_reports[1236]:

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Ok that's what I was wondering. On Tuesday, February 12, 2019 at 8:23:09 AM UTC-8, Pat wrote: > > I'm confused by the question. Or the question behind the question. > > The short answer is No. The skin is just a report. It is output only. > > You seem to be posting a driver log. Drivers ingest

[weewx-user] Re: Belchertown Skin 0.8.2 Released

I'm confused by the question. Or the question behind the question. The short answer is No. The skin is just a report. It is output only. You seem to be posting a driver log. Drivers ingest data, so they are very specific on the schema observations it'll save. So I think we are talking about

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Pat are any of these variables/settings used in your skin ? interceptor: MainThread: unrecognized parameter hourlyrainin=0.00 > interceptor: MainThread: unrecognized parameter eventrainin=0.00 > interceptor: MainThread: unrecognized parameter totalrainin=1.88 > interceptor: MainThread:

[weewx-user] Re: Belchertown Skin 0.8.2 Released

well it won't change by itself once the data is in the database You could run wee_database and drop daily and then rebuild daily - this will rebuild the daily tables (which contain the hi/low data) from the data in the archive table, which would not include any loop hi/low data. see the

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Tried both options by removing Hi/Lo and using sofware as preferred calculation with both the number didnt change. On Monday, 11 February 2019 10:24:07 UTC+3, Andrew Milner wrote: > > It is more than likely a result of multiplying a loop value to get an > hourly value. Best 'solution' is to

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Thanks Deborah, You are right I didnt notice that Live Data is calculating in cm, looks like I will need to override the MQTT to calculate in cm, its set as METRIC with no additional parameters On Monday, 11 February 2019 10:20:06 UTC+3, Deborah Pickett wrote: > > On Monday, February 11, 2019

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Will try software and see how it shows On Monday, 11 February 2019 10:24:07 UTC+3, Andrew Milner wrote: > > It is more than likely a result of multiplying a loop value to get an > hourly value. Best 'solution' is to NOT use loop Hi/Lo for daily data by > setting weewx.conf accordingly. An

[weewx-user] Re: Belchertown Skin 0.8.2 Released

It is more than likely a result of multiplying a loop value to get an hourly value. Best 'solution' is to NOT use loop Hi/Lo for daily data by setting weewx.conf accordingly. An alternative (or as well) is to use software preferred for rain rate and let weewx calculate the rate using its

[weewx-user] Re: Belchertown Skin 0.8.2 Released

On Monday, February 11, 2019 at 5:48:29 PM UTC+11, Adnan Mumtaz wrote: > > Experienced first good rain since I installed the WS, I see the highest > rate 1680 mm/hr and total rain rate 3.8 mm which is correct, but i dont > know how it calculated 1680 mm/hr, dont know if this is correct. >

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Experienced first good rain since I installed the WS, I see the highest rate 1680 mm/hr and total rain rate 3.8 mm which is correct, but i dont know how it calculated 1680 mm/hr, dont know if this is correct. http://www.riyadhweather.com On Saturday, 2 February 2019 19:38:03 UTC+3, Juan

[weewx-user] Re: Belchertown Skin 0.8.2 Released

The internationalization would be very interesting. That way we would not have to change the code with each update. Thank you for your work. El sábado, 2 de febrero de 2019, 13:57:13 (UTC+1), Pat escribió: > > Thanks. I'm working on skin version 0.9 now which I'm hoping to release > soon. Many

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Thanks. I'm working on skin version 0.9 now which I'm hoping to release soon. Many bug fixes. To change the chart names, check the files within skins/Highcharts_Belchertown/json I haven't had a chance to look into internationalization yet. Hopefully soon. On Saturday, February 2, 2019 at

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Hi Guys!Thank you, Pat, for the great skin! I am about to translate everything into German. I am currently stuck at renaming the graphs. Where do I need to change the titles of the diagrams and also the names of the single lines? Am Donnerstag, 31. Januar 2019 23:07:46 UTC+1 schrieb Pat: > >

[weewx-user] Re: Belchertown Skin 0.8.2 Released

The skin is showing the alerts that are downloaded from DarkSky. I have no more developer notes than that. If there's too many alerts, you can reach out to DarkSky themselves to ask about it. On Thursday, January 31, 2019 at 3:32:05 PM UTC-5, mercurystorm wrote: > > I just implemented this

[weewx-user] Re: Belchertown Skin 0.8.2 Released

I just implemented this skin and its fantastic I do however seem to be getting to many weather warnings.. Currently showing 4 weather warnings for my area.. but there is currently only one active on darksky https://stormy.ie/weather/live/ https://darksky.net/forecast/53.3272,-9.1737/ca12/en

[weewx-user] Re: Belchertown Skin 0.8.2 Released

I see that DarkSky isn't working well this morning. File "/home/weewx/bin/user/belchertown.py", line 499, in get_extension_list raise Warning( "Error downloading forecast data. Check the URL in your configuration and try again. You are trying to use URL: %s, and the error is: %s" % (

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Cloud base comes from weewx. The info on the page before MQTT updates is a tag the skin uses The info that's updated when MQTT connects is from the weewx-mqtt extension (which uses weewx to calculate). So if non-mqtt is correct, and mqtt is not, you may need to do a cloudbase override in the

[weewx-user] Re: Belchertown Skin 0.8.2 Released

:) True I sent an email to Dark Sky about the accuracy of their data for my area, where does the cloud base info the skin picks up? On Monday, 28 January 2019 16:27:13 UTC+3, Pat wrote: > > That comes from the DarkSky forecasting (which is updated every > forecast_stale >

[weewx-user] Re: Belchertown Skin 0.8.2 Released

That comes from the DarkSky forecasting (which is updated every forecast_stale interval - about 1 hour). So they may not be as up to date as your pilot friend is :) On Monday, January 28, 2019 at 8:25:33 AM UTC-5, Adnan Mumtaz

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Thanks a lot Pat i will try it, one more thing we have heavy winds with dust and low visibility but the skin is showing me 9km visibility where as aviation weather shows only 585 meters. I sent it a friend who is a pilot and he pointed out, he is in cockpit right now taxiing and giving me

[weewx-user] Re: Belchertown Skin 0.8.2 Released

To be clear, there's 2 things that are going on and I want to try to make sure we're on the same page. When the page initially loads, that's from weewx's core. So the metric settings come from the skin settings. Once MQTT is connected, then that data comes from the weewx-mqtt extension.

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Hi my cloud base shows in meters as I have group_altitude = meter , but when I change it to foot the skin calculates fine but when MQTT updates the data it changes to meter readings, MQTT setting is also set as METRIC. I see yours in feet too. On Tuesday, 1 January 2019 15:50:49 UTC+3, Pat

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Two things I might add to Pat's great tutorial: 1. Mosquitto not only hates extra spaces at the end of lines in config files, it also hates not having a newline at the end of each config file. Also, if Mosquitto exits due to a config file format issue, it doesn’t respond to a

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Check out Pat's tutorial on doing this on his website ( https://obrienlabs.net/how-to-setup-your-own-mqtt-broker/). That's what I used to set up MQTT for my website. phil On Wednesday, January 2, 2019 at 9:55:22 AM UTC-5, WILWetter25 wrote: > > Ive got some questions: I read about MQTT in your

[weewx-user] Re: Belchertown Skin 0.8.2 Released

Updated to 0.8.2 and works fine. El martes, 1 de enero de 2019, 13:50:49 (UTC+1), Pat escribió: > > I've just released version 0.8.2 of the Belchertown skin which fixes the > New Year bug some of you are seeing. It also adds some other features. > > > Download and install instructions here: >