It goes really well.
I thank you for all the help you have given an old man who loves to do this.
Thanks again for your help.
I'll read on your link.
Going to try and not nag more on you but can not promise anything.
Have 3 WMR928 I would also set up this way
Have a great day.
2017-02-27 14:38 G
On Monday, February 27, 2017 at 1:59:57 AM UTC-5, Torbjørn Aasen wrote:
>
> I do not get up Wind Cill and Heat index from WMR300 yet?
> See picture below
>
hello torbjørn,
please try the solution mentioned here:
https://groups.google.com/forum/#!topic/weewx-user/CMhCjyOZdRk
thank you for being
Does the wm300 show values for windchill and heat index? weewx software
generated values require temp < 50F and wind > 5mph for windchill and >80F
and humidity > 40% for heatindex otherwise will default to the same
as outdoor temperature.
On Monday, 27 February 2017 08:59:57 UTC+2, Torbjørn
so it is working fine again
On Sunday, 26 February 2017 18:33:43 UTC+2, Torbjørn Aasen wrote:
> traHeatindex3': None, 'extraHeatindex2': None, 'extraHeatindex1': None,
> 'extraHeatindex7': None, 'extraHeatindex6': None, 'extraHeatindex5': None,
> 'extraHeatindex4': None, 'interval':
traHeatindex3': None, 'extraHeatindex2': None, 'extraHeatindex1': None,
'extraHeatindex7': None, 'extraHeatindex6': None, 'extraHeatindex5': None,
'extraHeatindex4': None, 'interval': 900.0, 'dateTime': 1488108360.0,
'windDir': 153.0, 'outTemp': 0.6001, 'windSpeed': 1.3,
'inHumidity': 2
On Sunday, February 26, 2017 at 7:59:12 AM UTC-5, Torbjørn Aasen wrote:
>
> I think I'm never going to get this to work.
>
you are very close!
please use wmr300.py v0.18rc5 instead of rc4:
sudo /etc/init.d/weewx stop
sudo wget -O wmr300-0.18rc5.py
https://raw.githubusercontent.com/weewx/weewx/
Matthew - since you have provided a new driver for Torbjorn to use should I
leave this thread for you to resolve now?? It looks to me as though
everything is basically working as it should.
On Wednesday, 22 February 2017 14:13:42 UTC+2, mwall wrote:
> On Tuesday, February 21, 2017 at 2:14:47
On Tuesday, February 21, 2017 at 2:14:47 AM UTC-5, Torbjørn Aasen wrote:
>
> Sorry I nag so much on you.
> But I am a little distressed over not get it to work.
>
> I ran your commands and this is what came in the log
> ...
> Feb 21 07:38:53 raspberrypi weewx[657]: engine: Starting up weewx version
1. Weewx appeared to install correctly
2. Weewx started to run as a daemon as expected
3. Weewx attempted to read records from your wmr300 station - but I do not
understand the from n/a message
Your log that you show on the video does not begin at the start of weewx -
the log for 5 minutes ea
Have tried me with completely new installation today.
But stop unfortunately at the same place.
Has posted a film on the incident.
https://youtu.be/dD1J5EgcE74
2017-02-21 14:37 GMT+01:00 Lloyd Brown :
> I just finished upgrading from weewx 3.5 to 3.6 and going from a Pi 2 to a
> Pi 3 and ran int
I just finished upgrading from weewx 3.5 to 3.6 and going from a Pi 2 to a
Pi 3 and ran into these problems so once you have your weather station
actually communicating with the Pi look at these
Make sure you have done the prerequisites as shown in the weewx
documentation http://www.weewx.com/d
Sorry again for all the hassle.
I'm not home so I'll try it this afternoon
Thanks for all the great advice so far.
Have a nice day
2017-02-21 9:38 GMT+01:00 Andrew Milner :
> No, you are getting usb errors
>
> 1. stop weewx
> 2. check no other copies of weewx are running
>
> 3. unplug station
No, you are getting usb errors
1. stop weewx
2. check no other copies of weewx are running
3. unplug station from usb
4. check the log - you should see the device being disconnected
5. plug station back in again
6. check the log - you should see the device being connected
7. start weewx
8. check
It looks like it happens something now
Feb 21 09:25:53 raspberrypi kernel: [ 6508.721668] hid-generic
0003:0FDE:CA08.0009: hiddev0,hidraw1: USB HID v1.11 Device [Microchip
Technology Inc. USB HID Bootloader] on usb-3f98.usb-1.4/input0
Feb 21 09:25:53 raspberrypi weewx[3373]: engine: StdConver
1. You seem to have gone baqck to trying to use /home/pi/weewx.conf!!
2. You appear to have two copies of weewx trying to run - process id 2275
and 2258
3. stop the weewx daemon using sudo /etc/init.d/weewx stop
4. check the processes to make sure weewx is not running - kill any weewx
which is
Thank you for your time and help.
I hope that I get off on my first værstjon soon
This is what log shows now
pi@raspberrypi:~ $ tail -f /var/log/syslog
Feb 21 08:20:11 raspberrypi weewx[2258]: engine: Using Python 2.7.9
(default, Sep 17 2016, 20:26:04) #012[GCC 4.9.2]
Feb 21 08:20:11 raspberrypi
It looks as though weewx found your wmr300 this time.
The index.html will not be created until the first archive interval - so
how long it takes to appear depends on what archive interval you set in
weewx.conf
Just leave it running, and monitor the log using the command
tail -f /var/log/syslog
Sorry I nag so much on you.
But I am a little distressed over not get it to work.
I ran your commands and this is what came in the log
But I can still do not these files
file: ///var/www/html/weewx/index.html
Feb 21 07:38:53 raspberrypi kernel: [ 88.499789] usb 1-1.4: reset
full-speed USB de
Hello again
1 I we get this to work :-)
I used this guide but weather was not in RPI
I've put it in reach but it helps nothing.
Configure apt
Tell apt where to find the weewx releases. This only has to be done once -
the first time you install.
curl -s http://weewx.com/keys.html | sudo apt-key ad
or to run directly, not as a daemon, try
sudo weewxd /etc/weewx/weewx.conf
On Tuesday, 21 February 2017 08:54:41 UTC+2, Andrew Milner wrote:
> 1. what were you trying to do with the command which you posted?
> 2. how did you install weewx? If you used the deb install then try the
> commands
1. what were you trying to do with the command which you posted?
2. how did you install weewx? If you used the deb install then try the
commands:
sudo /etc/init.d/weewx start and
sudo /etc/init.d/weewx stop
to stop and start the weewx daemon - if you were trying to start weewx.
On Tuesday,
I have it connected to now
I had not when I installed into WEEWX program.
Do I delete weewx program to get it or is there something else that can fix
it
2017-02-21 7:46 GMT+01:00 Andrew Milner :
> Have you connected the weather station to the Pi?? The log is saying that
> weewx cannot find the
pi@raspberrypi:~ $ sudo weewxd weewx.conf
Unable to open configuration file /home/pi/weewx.confTraceback (most recent
call last):
File "/usr/bin/weewxd", line 64, in
weewx.engine.main(options, args)
File "/usr/share/weewx/weewx/engine.py", line 823, in main
config_dict = getConfigurati
Have you connected the weather station to the Pi?? The log is saying that
weewx cannot find the weather station plugged into the USB.
If you want to run weewx without a weather station connected to the RPi you
must select 'simulator' as the station type.
If you select a station type of WMR300
Feb 20 20:35:16 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca
router available
Feb 20 20:35:16 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca
router available
Feb 20 20:35:21 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca
router available
Feb 20 20:35:24 raspberrypi dhcp
Hi
I am completely new to this.
I did not find the log file either.
Have restarted the new NOOBS now.
Going to try and install once more before I enter the following description.
2017-02-18 21:10 GMT+01:00 mwall :
>
>
> On Saturday, February 18, 2017 at 2:50:35 PM UTC-5, Torbjørn Aasen wrote:
>>
On Saturday, February 18, 2017 at 2:50:35 PM UTC-5, Torbjørn Aasen wrote:
>
> I have loaded the latest Noobs and Weewx twice on my Raspberry PI 3.
> When I follow the installation guide it all seems to go right for
> themselves but this file can not I find afterwards.
> I've never done this befo
27 matches
Mail list logo
