Re: [weewx-user] Re: Use of postgresql

Grame, if you decide to tackle this, the right way to do it is to write a driver for the weedb shim. It takes care of any database differences. I doubt the differences in case-sensitivity will be a major problem. Weewx does not take advantage of case sensitivity. -tk On Tue, Dec 6, 2016 at

Re: [weewx-user] Re: WMR89 support?

Unfortunately, the WMR89 seems to use a completely different protocol than any of the other Oregon Scientific instruments (why??), so we don't have a driver. As Oregon Scientific does not publish their protocols, it would have to be reverse engineered. -tk On Tue, Dec 6, 2016 at 4:04 AM, Jimmy

[weewx-user] Re: Use of postgresql

M (or should it be m?) Thanks for the reply. I can see that, for maintainers of software in wide use, this would be a difficult problem to solve. However, as an exercise in getting to know Python and weewx better, I shall see if I can apply the changes to the latest release to satisfy my own

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

That's why I suggested just changing the version in weewx.conf and trying to 'fool' WU to see if it is something in THEIR validation procedures - as the weewx version is part of the rapid fire upload.. just a thought . On Tuesday, 6 December 2016 20:41:36 UTC+2, Marty Thompson wrote:

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

Yea only diff is. Weeazy. And 3.5.0 Jessie 3.6.2 Just waiting to see what wu says Cheers again for the help -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

Out of curiosity - change weewx.conf to give the earlier version of weewx - so that WU think you are using an earlier version - and see what happens!!! On Tuesday, 6 December 2016 20:08:17 UTC+2, Marty Thompson wrote: > Yea only diff is. > Weeazy. And 3.5.0 > Jessie 3.6.2 > > Just

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

Thanks mate I did a reinstall is on 3.5.0 now But might downgrade back to wheezy on the RPI as well But Thomas said its transmits the correct URL The bit that stumps me is they both did it after a upgrade Cheers -- You received this message because you are subscribed to the Google Groups

[weewx-user] How to add Irrometer Watermarks Sensors to the Raspberry?

Hi, another day - another question... :( We actually use two additional Stations within our Davis Vantage 2 - 6345OV - one is set up as leaf, the other as soil moisture/temp. But we need more than 4 soil moisture sensors to support our sponsor - so we have to connect them in anyway directly to

[weewx-user] Re: Dual system WMR88 and KlimaLogg pro

On Tuesday, December 6, 2016 at 4:53:55 PM UTC-5, BORIS wrote: > > I have been using older versions of weewx with WMR88 and KlimaLogg pro on > different computers. Now I would like to merge the two systems to one > LinuxMint PC laptop. What is the best way to configure weewx ? When I >

[weewx-user] Re: How do I change the CWOP server that I connect to?

Looks as though you should be using cwop.aprs.net http://www.wxqa.com/servers2use.html On Tuesday, 6 December 2016 13:24:42 UTC+2, Michael Connors wrote: > My station always connects to CWOP-3 and it has been down now for several > days. Is there a way that I can have weewx connect randomly

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

It's recommended now that you use rotate.aprs.net:14580 Here is my CWOP section [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = true

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

Dave - that was my point exactly - if an ham use rotate, if not a ham use cwop.aprs.net - but no need to specify cwop-3 specifically, which was his problem as cwop-3 is currently down. I posted the link so others know the correct route to follow and how to obtain the validation code if they

[weewx-user] Re: install difficulties

Alright! Your information was great. Thanks much. I found the info using pi@raspberrypi:~ $ dmesg | grep ttyUSB0 [5.446819] usb 1-1.4: cp210x converter now attached to ttyUSB0 [ 130.145672] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 130.145785] cp210x

[weewx-user] Re: WMR89 support?

Thank you for your response, even though it wasn't perhaps the best of news. As they mentioned in the thread it seems like a nice station, so it would be fun to have support for it. If there was more than 24 hours a day I could perhaps buy one and help with adding support for it but this

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

Andrew, Correct. I should probably wait until the coffee kicks in before answering questions, LOL. Dave-KB1PVH Sent from my Galaxy S7 On Dec 6, 2016 7:03 AM, "Andrew Milner" wrote: > Dave - that was my point exactly - if an ham use rotate, if not a ham use >

[weewx-user] Re: How do I change the CWOP server that I connect to?

Thanks for the fast response! 73, Mike, NA5SS On Tuesday, December 6, 2016 at 4:24:42 AM UTC-7, Michael Connors wrote: > > My station always connects to CWOP-3 and it has been down now for several > days. Is there a way that I can have weewx connect randomly to one of the > servers that are

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

Mike, Do you have an APRS passcode? I can generate one for you if needed. Dave-KB1PVH Sent from my Galaxy S7 On Dec 6, 2016 7:15 AM, "'Michael Connors' via weewx-user" < weewx-user@googlegroups.com> wrote: > Thanks for the fast response! > > 73, > > Mike, NA5SS > > > On Tuesday, December 6,

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

Andrew, For the Amateur radio operators they recommend using rotate to spread the load out on the servers, it's kinda like a backdoor into the APRS system. I can provide him with an APRS passcode if he doesn't already have one. Dave-KB1PVH Sent from my Galaxy S7 On Dec 6, 2016 6:49 AM,

Re: [weewx-user] Re: How do I change the CWOP server that I connect to?

Dave - I thought the rotate servers were only for use if you have a validation code, whilst the cwop.aprs.net should be used without the validation code - or is the link I posted out of date?? On Tuesday, 6 December 2016 13:43:46 UTC+2, Dave Webb wrote: > It's recommended now that you use

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system

Thanks Neville, I'l try it! 2016-12-05 22:31 GMT+01:00 Neville Davis : > I have built my own weather station using i2C sensors and a Pi3. This > generates a csv file I hold in RAM and a seperate driver pulls this data > into weewx. > > There have been several posts of

[weewx-user] Dual system WMR88 and KlimaLogg pro

I have been using older versions of weewx with WMR88 and KlimaLogg pro on different computers. Now I would like to merge the two systems to one LinuxMint PC laptop. What is the best way to configure weewx ? When I installed weewx 3.6.2 there was no selection possible for the KlimaLogg

Re: [weewx-user] Re: install difficulties

Odds are this is a problem with a serial to usb converter. Are you using one? The html directory will be created when the first report is run. You have a longish archive interval (30 minutes). Is that what you intended? -tk Fat-fingered from my Android On Dec 6, 2016 12:59 PM, "Eric Gammeter"

Re: [weewx-user] Re: install difficulties

Yes..i have a usb link. Possibly ferrite cores on the link? Yes...the vantage ws has been up for over a month. I appreciate your assistance. /E On Dec 6, 2016 4:59 PM, "Thomas Keffer" wrote: > Odds are this is a problem with a serial to usb converter. Are you using > one?

[weewx-user] Re: Use of postgresql

On Tuesday, December 6, 2016 at 9:35:48 AM UTC-5, Graeme wrote: > > Thanks for the reply. I can see that, for maintainers of software in wide > use, this would be a difficult problem to solve. However, as an exercise in > getting to know Python and weewx better, I shall see if I can apply the >