Hallo,
the page and the graphic are generated automatically
my changes "cydiagenerator.py" line ca. 548
#if rec['dd_cumulative'].raw > horizon_dd: <<---
cydiaA = rec['dd_cumulative'].raw
if cydiaA > horizon_dd:
in line 154
On Sunday, 20 May 2018 08:16:34 UTC+10, Steve2Q wrote:
>
> Hi Gary..I did the upgrade to 3.8.0 and so far all is well. I will have to
> check the clock on my console (Peet Bros Ultimeter) after 24 hours or so to
> see if the autocorrection in the driver is working. Up till now, I have
> been
Thank you Andrew, i´ll try this and give some feedback as soon as i´ve some
results. and: i highly appreciate your support.
greetings from austria, michael
2018-05-20 8:39 GMT+02:00 Andrew Milner :
> If the template is called awrs.txt.tmpl the output file from the
Thanks guys...
All clear now... as it so happens, my rPi1B had a corrupt SD card today...
installed WeeWX on another Pi instead of fixing this one.
I also had a second base station, which I now use to continue with the
WH3080 for the time being.
Given your input and what I researched the
Thank you mates,
i want to describe it more specific:
Once a day (in the evening) collected data should be uploaded to the
server. it is required to deliver a data (text) file, not a html file. data
should be separated by a comma, decimal separator is a point. data interval
should be 10min.
If the template is called awrs.txt.tmpl the output file from the cheetah
generator will be awrs.txt
In the same way that the html file is built up so can the txt file - by
using the tags
eg
$current.outTemp,$current.inTemp
should output
20oC,21oC
- or you can format as you wish using the
Gary..I am giving the console a full 24 hours to check the clock. On this
subject, are the times shown on the tables on a weewx page derived from the
console clock? So for example the high wind occurs at time will be off
as much as the console clock is off? I would assume so as they are
what does the weewx log say?? did you set altitude correctly in
weewx.conf??
you should attach the log from start up of weewx until after two archive
intervals and also the output from wee_debug (or a copy of weewx.conf), and
we may be able to assist you. Without the log we are working in
I set up my Acurite station today using WeeRX and everything seems to be
working fine, except that it doesn't appear to be sending barometric
pressure to Weather Underground. The local values and chart for pressure
are populated, but the pressure current value and chart on Wunderground
hasn't
Here's the link to the PWS on Weather
Underground:
https://www.wunderground.com/personal-weather-station/dashboard?ID=KILBLOOM57#history
On Sunday, May 20, 2018 at 9:54:49 PM UTC-5, Tony Cellini wrote:
>
> I set up my Acurite station today using WeeRX and everything seems to be
> working
Hi,
The lack of pressure data is likely due to weeWX not sending it. There are 3
'pressures' used within weeWX; station pressure, barometric pressure and
altimeter pressure. You can read about these in the wiki
(https://github.com/weewx/weewx/wiki/Barometer,-pressure,-and-altimeter).
Provided
11 matches
Mail list logo