it is working now , Reading the AucRite 01536
I can go to the local web page and all information is there.
I still get the stale data message on system log but all data is there on
the page. I am now going to connect it to ARPS.is
will keep everyone updated
Thanks everyone for your help.
If you look at the Console mostly you don't have any bars, if possible move
the Console. I get that once in a while.
On Friday, July 19, 2019 at 11:22:53 AM UTC-4, Charles Adams wrote:
>
> I am looking at the syslog and I see
> acurite: R1: ignoring stale data (rssi indicates no communications
I am looking at the syslog and I see
acurite: R1: ignoring stale data (rssi indicates no communications form
sensors): 01 c5 47 78 00 2a 26 48 00 00
On Friday, July 19, 2019 at 9:48:21 AM UTC-4, rich T wrote:
>
> In weewx.conf, set the debug to "1" and restart weewx.
>
> Watch the syslog,
In weewx.conf, set the debug to "1" and restart weewx.
Watch the syslog, after approx. 5 minutes you should see records being
added to the database. After 5 minutes you be able to see the data.
pi@raspberrypi:~ $ sudo tail -f /var/log/syslog
Jul 19 09:35:11 raspberrypi weewx[533]: acurite:
I have to play stupid, because I really don't know, seems like I had to
sudo something to create directory's in the beginning, but I did go right
down the list on the steps in order and everything worked out right, My
whole system is in a waterproof box at the base of the tower then I wifi to
I usually don’t have any problems with set up on the Pi but this thing, yes
I uninstalled Weewx and reinstalled it. This time I got the config screen. All
went well. I went to check the data with the web browser and the directory is
not there. So there is no way the data can show up.
Any
I have the same 01536 system, it has been running for a year now with no
problems, All I done was throw the worthless Accurite hub out the window,
went step by step on the Weewx setup for raspberry, and everything is
working great. If I was setting up another I would have to follow
All you should need to do is connect the console to the RPI via USB cable.
Configure the Acurite Console to use USB Mode 4. Select the Acurite driver
when installing weewx.
On Friday, July 19, 2019 at 6:38:59 AM UTC-4, Charles Adams wrote:
> Yes it does. I just found out that for some reason
Yes it does. I just found out that for some reason the software did not run the
configuration program when installed.
I will run that today and see if that works. I really want to get this up and
running
I will be putting it on ARPS
Randy NT8N
--
You received this message because you are
Does your Acurite 01536 Console have a micro-USB connector?
On Thursday, July 18, 2019 at 3:47:51 PM UTC-4, Charles Adams wrote:
>
> I have an Acurite 01536 and can't find the driver for it. I have Weewx
> installed on a Raspberry PI and it is running but not getting any data at
> all.
> I
10 matches
Mail list logo