Both times they were dry. I have had water cause ends to go bad on
other calls though.
On Sat, Sep 5, 2009 at 7:37 PM, Mikem...@aweiowa.com wrote:
Curious if you blew any water out of the low end of the cat5? I
had a similar thing happen one time. It was atmospheric pumping
caused by
All,
I have a sub that has had Several failures. The last one is understandable,
in that there was a direct lightning strike in their yard winthin 75' of CPE
(NS5). Its Ethernet port was bad, yet the radio was fine?? The one before
that, the power company worked on the power and said their
I have had the ethernet cable go bad just like that twice over the
past year. Both times was after a nearby lightning strike. The strange
things was that it passed with my tester. OK, my tester is only a
$100, not one of the fancy expensive units. Still, after the cable was
replaced, all was/is
Yes, that is possible.
Could also be the connectors. IDC (Insulation Displacement Connects)
can work loose and/or corrode, especially when subjected to unnatural
stress such as lightning.
rabbtux rabbtux wrote:
All,
I have a sub that has had Several failures. The last one is
Believe me, I tried replacing the end connectors before rerunning the cables.
On Sat, Sep 5, 2009 at 6:44 PM, Scott Reedscottr...@onlyinternet.net wrote:
Yes, that is possible.
Could also be the connectors. IDC (Insulation Displacement Connects)
can work loose and/or corrode, especially when
Curious if you blew any water out of the low end of the cat5? I
had a similar thing happen one time. It was atmospheric pumping
caused by pressure changes; at least that was the theory.
At 06:18 PM 9/5/2009, you wrote:
Believe me, I tried replacing the end connectors before rerunning the
the same thing here at a couple of sites.
Scott Carullo
Brevard Wireless
321-205-1100 x102
Original Message
From: RickG rgunder...@gmail.com
Sent: Saturday, September 05, 2009 7:18 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Ever see Ethernet cables fail
This site has been good for last 4 years. After 3 destroyed radios, I
will replace cable!
On 9/5/09, RickG rgunder...@gmail.com wrote:
Believe me, I tried replacing the end connectors before rerunning the
cables.
On Sat, Sep 5, 2009 at 6:44 PM, Scott Reedscottr...@onlyinternet.net
wrote:
Original Message
From: RickG rgunder...@gmail.com
Sent: Saturday, September 05, 2009 7:18 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Ever see Ethernet cables fail so that ...
Believe me, I tried replacing the end connectors before rerunning